The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter contains the following sections:
This section lists the new and changed information in this document by release:
Feature |
Description |
Release |
---|---|---|
Enable the Cisco UCS 1225 (10 Gbps) card on the Cisco Nexus 1110-X |
The Cisco Nexus 1110-X has its dual 10 Gbps ports enabled as uplinks in shared mode. |
5.2(1)SP1(7.1) |
Support for the Cisco Nexus 1000V for KVM |
The Cisco Nexus Cloud Services Platform supports the Cisco Nexus 1000V for KVM. The Cisco Nexus 1000V for KVM can be deployed as a VSB on the Cisco Nexus Cloud Services Platform. |
5.2(1)SP1(7.1) |
No support for static topologies |
The Cisco Nexus Cloud Services Platform supports only a flexible network topology. All previously configured static topologies are automatically converted to a flexible configuration during an upgrade. |
5.2(1)SP1(7.1) |
Automatic execution of the copy running-config startup-config command for saving VSB configuration settings |
The copy running-config startup-config command is automatically executed at 5-minute intervals to save all virtual service blade (VSB) configuration settings. |
5.2(1)SP1(7.1) |
Interface name mode passthrough |
Command to configure a VSB to assign a virtual interface to an uplink. |
4.2(1)SP1(6.1) |
Form factor for VSG VSB |
Set up the VSG VSBs in different form factors. |
4.2(1)SP1(6.1) |
show virtual-service-blade name command |
This command was introduced. |
4.2(1)SP1(5.1) |
Flexible network uplink |
Configure a flexible network uplink type. |
4.2(1)SP1(4) |
Native VLAN |
Assign a native VLAN to a port channel. |
4.2(1)SP1(4) |
Shut down port channel interfaces |
Shut down ports or port channel interfaces. |
4.2(1)SP1(4) |
OVA support for VSB |
Create a VSB using an OVA file. |
4.2(1)SP1(4) |
Migrate OVA |
Export an OVA from ESX and import it into the Cisco Nexus 1010 product family as a VSB. |
4.2(1)SP1(4) |
Migrate a VSB |
Migrate a VSB from the Cisco Nexus 1010 to the Cisco Nexus 1010-X. |
4.2(1)SP1(3) |
Back up and restore a VSB |
Create a backup copy of a VSB, store it remotely, and reimport it to restore a VSB. |
4.2(1)SP1(3) |