The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Symbols
^Z to exit current command mode and return to exec 6-4
A
add host to DVS
CLI setup 4-22
authentication, vCenter Server, GUI setup 3-5
C
class-map limits 8-1
CLI
command modes 6-2
command prompt 6-1
setting delay time 6-14
software setup 4-1
variables
in command scripts 6-13
persistent variables 6-11
session-only variables 6-10
system-defined variables 6-12
command
mode
EXEC 6-3
global configuration 6-3
how to exit 6-4
information about 6-2
summary of all 6-5
no 6-9
prompts 6-5
scripts 6-13
configuration limits 8-1
connectivity, verify 4-7
connect to vCenter Server
CLI setup 4-9
context-sensitive help, check syntax for 6-14
control VLAN
CLI setup 4-6
D
data port profile, setup CLI 4-19
default gateway
CLI setup 4-5
description command 4-13, 4-17, 4-20
documentation
additional publications 1-vii
domain
CLI setup 4-6
domain ID, VSM
CLI setup 4-3
E
end command 6-4
EXEC commands 6-3
exit a command mode 6-4
exit command 6-4
extended system ID
VLAN 2-8
F
features, new and changed (table) 1-iii
G
global configuration mode, about 6-3
GUI, software setup 3-1
H
HA role
CLI setup 4-3
host, add to DVS
CLI setup 4-22
HTTP
CLI setup 4-5
I
IP connectivity, verify 4-7
L
limits, configuration 8-1
M
match criteria limit 8-1
mgmt0
CLI setup 4-5
modes, command 6-5
N
no command form 6-9
NTP
CLI setup 4-5
P
packet VLAN
CLI setup 4-6
password
vCenter Server, GUI setup 3-5
plug-in, create on vCenter Server, CLI setup 4-7
policy map limits 8-1
prompt, command 6-1
prompts, command 6-5
R
reserved VLANs 2-7
network administrator 1-5
server administrator 1-5
S
same host for VEM and VSM 5-1
secure http, GUI setup 3-5
service policy limits 8-1
software setup
CLI 4-1
GUI 3-1
SSH
CLI setup 4-5
switch name
CLI setup 4-5
syntax check 6-14
system port profile
CLI setup 4-12
T
Telnet
CLI setup 4-5
time
setting delay in CLI 6-14
U
uplink port profile
CLI setup 4-16
V
vCenter identification, GU setupI 3-5
VEM
feature level
CLI setup 4-6
VEM and VSM on same host 5-1
verify IP connectivity 4-7
VLAN
extended system ID 2-8
reserved range of 2-7
setup, GUI 3-6
VMotion 1-6
VSM
and VEM on same host 5-1
configuration file, setup 3-22
credentials
CLI setup 4-3
host, GUI setup 3-5