G Commands
This chapter describes the Cisco Nexus 1000V commands that begin with G.
group (Port Profile Role)
To assign a group to a port profile role, use the group command. To remove the group, use the no form of the command.
Syntax Description
Specify that a group is to be added to the port-profile role, and the name of the group (maximum of 32 characters). |
Defaults
Command Modes
Port profile role configuration (config-port-profile-role)
Command History
|
|
Examples
This example shows how to assign the credit group to the supportRole:
n1000v# config t
n1000v(
config-port-profile-role)#
group credit
This example shows how to remove the credit group assignment from the supportRole:
n1000v# config t
n1000v(
config-role)#
no group credit
Related Commands
group (VXLAN)
To associate the multicast group for broadcasts and floods, use the group command. To remove the multicast group, use the no form of this command.
Syntax Description
Defaults
Command Modes
Bridge Domain configuration (config-bd)
Command History
|
|
Examples
This example shows how to associate a multicast group to a VXLAN:
n1000v(config)# bridge-domain tenant-red
n1000v(config-bd)# group 239.1.1.1
Related Commands
|
|
---|---|
gunzip
To uncompress a compressed file, use the gunzip command.
Syntax Description
Defaults
Command Modes
Command History
|
|
---|---|
Usage Guidelines
The compressed filename must have the.gz extension.
You do not have to enter the.gz extension as part of the filename.
The Cisco NX-OS software uses Lempel-Ziv 1977 (LZ77) coding for compression.
Examples
This example shows how to uncompress a compressed file:
Related Commands
|
|
---|---|
gzip
To compress a file, use the gzip command.
Syntax Description
Defaults
Command Modes
Command History
|
|
---|---|
Usage Guidelines
After you use this command, the file is replaced with the compressed filename that has the.gz extension.
The Cisco NX-OS software uses Lempel-Ziv 1977 (LZ77) coding for compression.
Examples
This example shows how to compress a file:
Related Commands
|
|
---|---|