Cisco Virtual Switch Update Manager Troubleshooting Guide, Release 1.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: February 17, 2015

Chapter: Adding Hosts to the Cisco Application Virtual Switch

Problems with Adding Hosts to the Cisco Application Virtual Switch

Adding Hosts to the Cisco Application Virtual Switch

This chapter contains the following sections:

Problems with Adding Hosts to the Cisco Application Virtual Switch

Problems with Adding Hosts to the Cisco Application Virtual Switch

For problems adding hosts to the Cisco Application Virtual Switch, do the following:

Step 1	Use Secure Shell (SSH) to connect into Cisco Virtual Switch Update Manager. The default username is root and the password is cisco.
Step 2	Navigate to /etc/cisco/app_install/ and run the ./bundleLogs.sh command.
Step 3	In the root directory, retrieve the ajaxLogs folder, compress the folder, and send it to the Cisco Technical Assistance Center.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)