Cisco Nexus 3000 Series NX-OS Fundamentals Configuration Guide, Release 9.3(x)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: July 20, 2019

New and Changed Information

This chapter contains the following sections:

New and Changed Information

The following table provides an overview of the significant changes made to this configuration guide. The table does not provide an exhaustive list of all changes made to this guide or all new features in a particular release.

Table 1. New and Changed Features
Feature	Description	Changed in Release	Where Documented
Erase Configuration	Added support for preserving the IPv6 address on mgmt 0 interface and the IPv6 Default Gateway in Management VRF after write erase, reload operation.	9.3(2)	Erasing a Configuration
Fundamentals features	No updates since Cisco NX-OS Release 9.2(x)	9.3(1)	-

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)