Cisco Nexus 3548 Switch NX-OS Fundamentals Configuration Guide, Release 9.2(x)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: February 18, 2019

Chapter: New and Changed Information

New and Changed Information
New and Changed Information for this Release

New and Changed Information

This chapter contains the following sections:

New and Changed Information for this Release

The following table provides an overview of the significant changes to this guide for this current release. The table does not provide an exhaustive list of all changes made to the configuration guides or of the new features in this release.

Table 1. New and Changed Features
Feature	Description	Added or Changed in Release	Where Documented
	Changed the document title from 9.x to 9.2(x).		Title page
system no poap command	Added support to disable POAP.	9.2(2)	Disabling POAP
show time-stamp running-config last-changed command	Added support to display the time-stamp when the running configuration was last changed.	9.2(1)	Verifying the Device Configuration

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)