The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
and QoS configuration 1-11
configuring for FCoE COS 1-8
for FCoE 1-8
class-fcoe 1-8
class of service (COS) 1-12
and ETS 1-12
and PFC 1-12
DCB support 1-13
second generation 1-6
consolidated links 1-9, 1-10
benefits 1-10
consolidated vs dedicated links 1-9
default value and FCoE 1-12
Data Center Bridging eXchange (DCBX) 1-13
DCB Ethernet links 1-9
negotiation failure 1-14
dedicated links 1-9, 1-10
benefits 1-10
on Cisco Nexus 5000 Series switch 1-15
limitations 1-15
Enhanced Transmission Selection (ETS) 1-12
Ethernet NIC 1-6
default settings 1-12
FC-MAP 1-2
changing the FC-MAP value 1-2
default value 1-2
ranges 1-2
buffer allocation 1-8
enabling 1-2
enabling on VLAN 1 1-3
host disruptions 1-2
interoperability 1-14
and QoS configuration example 1-12
predefined QoS policies 1-11
QoS configuration 1-11
single-hop topology 1-14
best practice 1-3
configuring 1-3
host-facing 1-3
and STP 1-3, 1-4
configuration in a vPC 1-7
connecting to a VF port 1-3
difference from Ethernet VLANs 1-3
HBA 1-6
high availability (HA) 1-2
IEEE 802.1Q Data Center Bridging (DCB) standard 1-13
IEEE 802.1Q Enhance Ethernet Standards 1-12
IEEE 802.1Q standard 1-12
and FCoE 1-14, 1-15
link aggregation control protocol (LACP) 1-5
load balance 1-2
MST 1-4
fabric services 1-15
network disruptions 1-2
new and changed features (table) 2-9
no-drop classes of service 1-12
thresholds 1-8
N-Port ID Virtualization (NPIV) 1-15
N-Port Virtualizer (NPV) 1-15
device benefits 1-15
NPIV requirement 1-15
changing to switch mode 1-15
requirement 1-15
class-of-service 1-12
default settings 1-12
lossless transport and dedicated bandwidth 1-12
FCoE policies 1-11
Priority Flow Control (PFC) 1-12
PVST 1-4
PVST+ 1-4
FCoE configuration 1-11
FCoE topology 1-14
Spanning Tree Protocol 1-3
and FCoE 1-15
and native fabric services 1-15
changing to NPV mode 1-15
Unified Port Controller (UPC) ASIC 1-10
first generation 1-10
second generation 1-10
VLAN configuration limit 1-11
unified ports 1-11
configuration requirements 1-11
in expansion modules 1-11
and FCoE 1-5
scalability 1-11
VLAN to VSAN mapping 1-3
connecting a host 1-5
Index
and QoS configuration 1-11
configuring for FCoE COS 1-8
for FCoE 1-8
class-fcoe 1-8
class of service (COS) 1-12
and ETS 1-12
and PFC 1-12
DCB support 1-13
second generation 1-6
consolidated links 1-9, 1-10
benefits 1-10
consolidated vs dedicated links 1-9
default value and FCoE 1-12
Data Center Bridging eXchange (DCBX) 1-13
DCB Ethernet links 1-9
negotiation failure 1-14
dedicated links 1-9, 1-10
benefits 1-10
on Cisco Nexus 5000 Series switch 1-15
limitations 1-15
Enhanced Transmission Selection (ETS) 1-12
Ethernet NIC 1-6
default settings 1-12
FC-MAP 1-2
changing the FC-MAP value 1-2
default value 1-2
ranges 1-2
buffer allocation 1-8
enabling 1-2
enabling on VLAN 1 1-3
host disruptions 1-2
interoperability 1-14
and QoS configuration example 1-12
predefined QoS policies 1-11
QoS configuration 1-11
single-hop topology 1-14
best practice 1-3
configuring 1-3
host-facing 1-3
and STP 1-3, 1-4
configuration in a vPC 1-7
connecting to a VF port 1-3
difference from Ethernet VLANs 1-3
HBA 1-6
high availability (HA) 1-2
IEEE 802.1Q Data Center Bridging (DCB) standard 1-13
IEEE 802.1Q Enhance Ethernet Standards 1-12
IEEE 802.1Q standard 1-12
and FCoE 1-14, 1-15
link aggregation control protocol (LACP) 1-5
load balance 1-2
MST 1-4
fabric services 1-15
network disruptions 1-2
new and changed features (table) 2-9
no-drop classes of service 1-12
thresholds 1-8
N-Port ID Virtualization (NPIV) 1-15
N-Port Virtualizer (NPV) 1-15
device benefits 1-15
NPIV requirement 1-15
changing to switch mode 1-15
requirement 1-15
class-of-service 1-12
default settings 1-12
lossless transport and dedicated bandwidth 1-12
FCoE policies 1-11
Priority Flow Control (PFC) 1-12
PVST 1-4
PVST+ 1-4
FCoE configuration 1-11
FCoE topology 1-14
Spanning Tree Protocol 1-3
and FCoE 1-15
and native fabric services 1-15
changing to NPV mode 1-15
Unified Port Controller (UPC) ASIC 1-10
first generation 1-10
second generation 1-10
VLAN configuration limit 1-11
unified ports 1-11
configuration requirements 1-11
in expansion modules 1-11
and FCoE 1-5
scalability 1-11
VLAN to VSAN mapping 1-3
connecting a host 1-5