New and Changed Information
This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 5000 Series NX-OS Security Configuration Guide.
New and Changed Information
This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 5000 Series NX-OS Security Configuration Guide.
The latest version of this document is available at the following Cisco website:
http://www.cisco.com/en/US/products/ps9670/products_installation_and_configuration_guides_list.html
To check for the latest information about Cisco NX-OS for the Cisco Nexus 5000 Series switch, see the Cisco Nexus 5000 Series and Nexus 2000 Series NX-OS Release Notes available at the following Cisco website:
http://www.cisco.com/en/US/products/ps9670/prod_release_notes_list.html
Feature |
Description |
Changed in Release |
Where Documented |
---|---|---|---|
Dynamic ARP Inspection | Added information to configure Dynamic ARP Inspections. |
5.0(3)N1(1) |
Configuring Dynamic ARP Inspection |
IP Source Guard | Added information to configure IP Source Guard. | 5.0(3)N1(1) | Configuring IP Source Guard |
Feature |
Description |
Changed in Release |
Where Documented |
---|---|---|---|
DHCP Snooping with Option 82 | Added information about the support for optimized DHCP snooping in a vPC environment. |
5.0(2)N2(1) |
Configuring DHCP Snooping |
Feature |
Description |
Changed in Release |
Where Documented |
---|---|---|---|
Command Authorization Support for TACACS+ Servers | Allows you to verify authorized commands for authenticated users using TACACS+ |
5.0(2)N1(1) |
Configuring TACACS+ |
ACLs on VTY lines | Allows you to restrict incoming and outgoing connections between a VTY line (into a Cisco Nexus 5000 Series switch) and the addresses in an access list, | 5.0(2)N1(1) | Configuring Access Control Lists |
Feature |
Description |
Changed in Release |
Where Documented |
---|---|---|---|
AAA Command Authorization | Allows you to authorize every command that a user can execute. | 4.2(1)N1(1) |
Configuring AAA |
Feature |
Description |
Changed in Release |
Where Documented |
---|---|---|---|
IP ACL to mgmt0 |
Allows you to apply an IP ACL to the mgmt0 interface. |
4.1(3)N2(1) |
Configuring Access Control Lists |
Global source interface for TACACS+ |
Allows you to configure the global source interface for all TACACS+ server groups that are configured on the device. |
4.1(3)N2(1) |
Configuring TACACS+ |
Global source interface for RADIUS |
Allows you to configure the global source interface for all RADUS server groups that are configured on the device. |
4.1(3)N2(1) |
Configuring RADIUS |
Documentation Organization
As of Cisco NX-OS Release 4.1(3)N2(1), the Nexus 5000 Series configuration information is available in new feature-specific configuration guides for the following information:
-
System Management
-
Layer 2 Switching
-
SAN Switching
-
Fibre Channel over Ethernet
-
Security
-
Quality of Service
The information in these new guides previously existed in the Cisco Nexus 5000 Series CLI Configuration Guide which remains available on Cisco.com and should be used for all software releases prior to Cisco Nexus 5000 NX-OS Software Rel 4.1(3). Each new configuration guide addresses the features that are introduced in or are available in a particular release. Select and view the configuration guide that pertains to the software installed in your switch.
The information in the new Cisco Nexus 5000 Series NX-OS Security Configuration Guide previously existed in Part 3: Switch Security Features of the Cisco Nexus 5000 Series CLI Configuration Guide.
For a complete list of Nexus 5000 Series document titles, see the list of Related Documentation in the "Preface."