periodic-inventory (Call Home)
To configure the switch to periodically send a message with an inventory of all software services currently enabled and running on the device with hardware inventory information, use the periodic-inventory command. To disable the periodic messages, use the no form of this command.
periodic-inventory notification [interval time-period | timeofday time-of-day]
no periodic-inventory notification [interval time-period | timeofday time-of-day]
Syntax Description
notification |
Enables sending periodic software inventory messages. |
interval time-period |
(Optional) Specifies the time period for periodic inventory notification. The time period range is from 1 to 30 days, and the default is 7 days. |
timeofday time-of-day |
(Optional) Specifies the time of day for periodic inventory notification. The time of day is in HH:MM format. |
Command Default
Interval: 7 days
Command Modes
Callhome configuration mode
Command History
Release |
Modification |
---|---|
This command was introduced. |
Usage Guidelines
The switch generates two Call Home notifications: periodic configuration messages and periodic inventory messages.
Examples
This example shows how to configure a periodic inventory notification to generate every 5 days:
switch(config-callhome)# periodic-inventory notification interval 5
switch(config-callhome)#
This example shows how to disable a periodic inventory notification for Call Home:
switch(config-callhome)# no periodic-inventory notification interval 5
switch(config-callhome)#