The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter describes the Cisco NX-OS security commands that begin with H.
To configure the threshold value for logical operation units (LOUs), use the hardware access-list lou resource threshold command. To remove the threshold value and revert to the default value, use the no form of this command.
hardware access-list lou resource threshold value
no hardware access-list lou resource threshold value
value |
Threshold value. Valid values are from 1 to 32. The default is 5. |
Threshold value of 5.
Global configuration mode
|
|
6.0(2)N1(1) |
This command was introduced. |
None.
The following example shows how to configure the maximum threshold value of 15 for LOUs.
switch# configuration terminal
switch(config)# hardware access-list lou resource threshold 15