disable-fka
To disable the verification of Fibre Channel over Ethernet (FCoE) Initialization Protocol (FIP) keepalive (FKA) messages, use the diable-fka command. To enable FKA messages, use the no form of this command.
disable-fka
no disable-fka
Syntax Description
This command has no arguments or keywords.
Command Default
Enabled
Command Modes
Virtual Fibre Channel interface configuration mode
Command History
Release |
Modification |
---|---|
NX-OS 6.2(8) |
This command was introduced. |
Usage Guidelines
Before you use this command, you must enable Fibre Channel over Ethernet (FCoE).
Examples
This example shows how to disable the verification of FKA messages:
switch# configure terminal
switch(config)# interface vfc 3
switch(config-if)# disable-fka
switch(config-if)#
This example shows how to enable the verification of FKA messages:
switch# configure terminal
switch(config)# interface vfc 3
switch(config-if)# no disable-fka
switch(config-if)#