show ipv6 mroute summary
To display summary information about IPv6 multicast routes, use the show ipv6 mroute summary command.
show ipv6 mroute summary [count | [software-forwarded]] [vrf {vrf-name | all}]
show ipv6 mroute group summary [software-forwarded] [vrf {vrf-name | all}]
Syntax Description
count |
(Optional) Displays only route counts. |
software-forwarded |
(Optional) Displays software-switched route counts only. |
vrf |
(Optional) Applies to a virtual routing and forwarding (VRF) instance. |
vrf-name |
VRF name. |
all |
Specifies all VRFs. |
group |
Specifies a group address for a route. |
Command Default
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History
Release |
Modification |
---|---|
4.0(1) |
This command was introduced. |
Usage Guidelines
This command requires the Enterprise Services license.
Examples
This example shows how to display summary information about multicast routes:
switch(config)#
show ipv6 mroute summary
IPv6 Multicast Routing Table for VRF "default"
Total number of routes: 1
Total number of (*,G) routes: 0
Total number of (S,G) routes: 0
Total number of (*,G-prefix) routes: 1
Group count: 0, rough average sources per group: 0.0
Group: ff30::/32, Source count: 0
Source packets bytes aps pps bit-rate oifs
(*,G) 0 0 0 0 0 bps 0
switch(config)#