The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter describes the Cisco NX-OS multicast routing commands that begin with F.
To enable the Multicast Source Discovery Protocol (MSDP) feature, use the feature msdp command. To disable this feature, use the no form of this command.
|
|
This example shows how to enable the MSDP feature:
|
|
---|---|
To enable the Protocol Independent Multicast (PIM) feature, use the feature pim command. To disable this feature, use the no form of this command.
|
|
This example shows how to enable the PIM:
|
|
---|---|
To enable the Protocol Independent Multicast (PIM) for IPv6 feature, use the feature pim6 command. To disable this feature, use the no form of this command.
|
|
The example shows how to enable the PIM for IPv6:
|
|
---|---|