To display the EEE
configuration, perform one of the following tasks:
Table 2. EEE on an
Ethernet interface
Command
|
Purpose
|
show environment
power detail
|
Displays the
current power usage.
|
show interface
ethernet
slot/port
|
Displays the
EEE status on the interface. The options are as follows:
-
N/A—The
interface is not capable of EEE.
-
Disabled—EEE is disabled on this interface.
-
Disagreed—EEE autonegotiation with the link partner has failed
-
Operational—EEE is enabled and operational on this interface.
|
show interface ethernet
slot/port
capabilities
|
Displays whether the interface is EEE capable.
|
show interface ethernet
slot/port
counters detailed
|
Displays the
following EEE statistics on the interface:
-
Tx LPI
usecs—The amount of time (in microseconds) that the transmitting link partner
waits before it starts transmitting data after leaving LPI mode.
-
Rx LPI
usecs—The amount of time (in microseconds) that the receiving link partner
requests that the transmitting link partner wait before transmitting data after
leaving LPI mode.
-
Tx LPI
requests—The number of times that the transmitting link partner makes a request
to enter LPI mode.
-
Rx LPI
indications—The number of times the
receiving link partner detects that the transmitting link
partner has entered LPI mode.
|