System Specifications

Environmental Specifications

Environment

Specification

Temperature

Ambient operating temperature

32 to 104°F (0 to 40°C)

Ambient nonoperating

–40 to 158°F (–40 to 70°C)

Relative humidity

Nonoperating

5 to 95%

Operating

5 to 90%

Altitude

Operating

0 to 13,123 feet (0 to 4,000 meters)

Switch Dimensions

Switch

Width

Depth

Height

Cisco Nexus 9332C

17.3 inches (43.9 cm)

22.9 inches (58.1 cm)

1.72 inches (4.4 cm) (1 RU)

Switch and Module Weights and Quantities

Component

Weight per Unit

Quantity

Cisco Nexus 9332C Chassis (N9K-C9332C)

25 lb (11.3 kg)

1

Fan Module

– Port-side exhaust (blue) (NXA-FAN-35CFM-PE)

– Port-side intake (burgundy) (NXA-FAN-35CFM-PI)

—

0.26 lb (0.12 kg)

5 (4 for operations and 1 for redundancy)

Power Supply Module

– 1100-W AC port-side exhaust (blue) (NXA-PAC-1100W-PE2)

– 1100-W AC port-side intake (burgundy) (NXA-PAC-1100W-PI2)

– 1100-W DC port-side exhaust (blue) (NXA-PDC-1100W-PE)

– 1100-W DC port-side intake (burgundy) (NXA-PDC-1100W-PI)

– 1100-W HVAC/HVDC port-side exhaust (blue) (NXA-PUV-1100W-PE)

– 1100-W HVAC/HVDC port-side intake (burgundy) (NXA-PUV-1100W-PI)

– 750-W AC port-side exhaust (blue) (NXA-PAC-750W-PE)

– 750-W AC port-side intake (burgundy) (NXA-PAC-750W-PI)

—

2.42 lb (1.1 kg)

2 (1 for operations and 1 for redundancy)

Switch Power Input Requirements

The following table lists the typical amount of power that the switch consumes. It also lists the maximum amount of power that you must provision for the switch and power supply for peak conditions.


Note

Some power supplies have capabilities that are greater than the maximum power requirements for a switch. To determine the power consumption characteristics for the switch, use the typical and maximum requirements that are listed in the following table.

Switch Typical Power Consumption (AC or DC) Maximum Power Consumption (AC or DC) Heat Dissipation Requirement

Cisco Nexus 9332C

296 W

708 W

2415.796 BTUs per hour

Power Specifications

Power specifications include the specifications for each type of power supply module.

750-W AC Power Supply Specifications

These specifications apply to the following power supplies:

  • NXA-PAC-750W-PE

  • NXA-PAC-750W-PI

Characteristic Specification

Maximum output power

750 W

Maximum input current

10 Amps at 100 VAC

Rated input voltage

115 to 240 VAC nominal (Range: 90 to 264 VAC)

Rated input frequency

50 to 60 Hz nominal (Range: 47 to 63 Hz)

1100-W AC Power Supply Specifications

These specifications apply to all versions of the NXA-PAC-1100W power supply

Characteristic Specification

AC input voltage

Nominal range: 100 and 240 VAC (Range: 90-132 VAC, 180-264 VAC)

AC input frequency

Nominal range: 50 to 60 Hz (Range: 47-63 Hz)

Maximum AC input current

13 A at 100 VAC

6 A at 240 VAC

Maximum input volt-amperes

1300 VA at 100 VAC

Maximum output power per power supply

1100 W

Maximum inrush current

33 A

Maximum hold-up time

12 ms at 1100 W

Power supply output voltage

12 VDC

Power supply standby voltage

12 VDC

Efficiency rating

Climate Savers Platinum Efficiency (80Plus Platinum certified)

Form factor

RSP1

1100-W HVAC/HVDC Power Supply Specifications

These specifications apply to the following power supplies:

  • NXA-PHV-1100W-PE

  • NXA-PHV-1100W-PI

Characteristic Specification

Efficiency

94%

Input voltage

100VAC – 277VAC, 240VDC – 380VDC

Nominal frequency

50, 60Hz

Maximum input current

100-277VAC 13A Max, 240VDC – 380VDC 5.5A Max

Maximum inrush current

35A (cold turn on); 50A (hot turn on)

Maximum continuous total output power

1100W @ 100 – 277VAC, 240VDC – 380VDC

Output voltage

12V/ 90A

Standby output voltage

3.3V/ 3A

Efficiency

80 Plus Platinum

1100-W DC Power Supply Specifications

These specifications apply to the following power supplies:

  • NXA-PDC-1100W-PE

  • NXA-PDC-1100W-PI

Characteristic Specification

DC input voltage range

Nominal range: -54VDC (Range: -40 to -72 VDC)

Maximum DC input current

32 A at -40 VDC

Maximum output power per power supply

1100 W

Maximum inrush current

90 A (cold turn on)

Maximum hold-up time

4 ms at 100% load

Power supply output voltage

12 V/ 90A

Power supply standby voltage

3.3 V/ 3A

Efficiency rating @ -48VDC

94% at 50% load

Power Cable Specifications

The following sections specify the power cables that you can order and use with this switch.

Power Cable Specifications for AC Power Supplies

Power Type Power Cord Part Number Cord Set Description

CAB-C13-C14-2M

Power Cord Jumper, C13-C14 Connectors, 6.6 feet (2.0 m)

CAB-C13-CBN

Cabinet jumper power cord, 250 VAC, 10 A, C14-C13 connectors, 2.3 feet (0.7 m)

Argentina

CAB-250V-10A-AR

250 V, 10 A, 8.2 feet (2.5 m)

Australia

CAB-9K10A-AU

250 VAC, 10 A, 3112 plug, 8.2 feet (2.5 m)

Brazil

CAB-250V-10A-BR

250 V, 10 A, 6.9 feet (2.1 m)

European Union

CAB-9K10A-EU

250 VAC, 10 A, CEE 7/7 plug, 8.2 feet (2.5 m)

India

CAB-IND-10A

10 A, 8.2 feet (2.5 m)

India

CAB-C13-C14-2M-IN

Power Cord Jumper, C13-C14 Connectors, 6.6 feet (2.0 m)

India

CAB-C13-C14-3M-IN

Power Cord Jumper, C13-C14 Connectors, 9.8 feet (3.0 m)

Israel

CAB-250V-10A-IS

250 V, 10 A, 8.2 feet (2.5 m)

Italy

CAB-9K10A-IT

250 VAC, 10 A, CEI 23-16/VII plug, 8.2 feet (2.5 m)

Japan

CAB-C13-C14-2M-JP

Power Cord Jumper, C13-C14 Connectors, 6.6 feet (2.0 m)

North America

CAB-9K12A-NA

125 VAC, 13 A, NEMA 5-15 plug, 8.2 feet (2.5 m)

North America

CAB-AC-L620-C13

NEMA L6-20-C13, 6.6 feet (2.0 m)

North America

CAB-N5K6A-NA

200/240V, 6A, 8.2 feet (2.5 m)

Peoples Republic of China

CAB-250V-10A-CN

250 V, 10 A, 8.2 feet (2.5 m)

South Africa

CAB-250V-10A-ID

250 V, 10 A, 8.2 feet (2.5 m)

Switzerland

CAB-9K10A-SW

250 VAC, 10 A, MP232 plug, 8.2 feet (2.5 m)

United Kingdom

CAB-9K10A-UK

250 VAC, 10 A, BS1363 plug (13 A fuse), 8.2 (2.5 m)

All except Argentina, Brazil, and Japan

NO-POWER-CORD

No power cord included with switch

HVAC/HVDC Power Cables Supported by ACI-Mode and NX-OS Mode Switches

Part Number

Cord Set Description

Photo

CAB-HVAC-SD-0.6M

HVAC

2-foot (0.6 m) cable with Saf-D-Grid and SD connectors

277V AC

CAB-HVAC-C14-2M

HVAC

6.6-foot (2.0 m) cable with Saf-D-Grid and C14 (use for up to 240 V) connector

250V AC

CAB-HVAC-RT-0.6M

HVAC

2-foot (0.6 m) cable with Saf-D-Grid and RT connector

277V AC

CAB-HVDC-3T-2M

HVDC

6.6-foot (2.0 m) cable with Saf-D-Grid and three terminal connectors

300V AC / 400V DC (+200/-200 V DC)

NO-POWER-CORD

All except Argentina, Brazil, and Japan

No power cord included with switch

Not applicable
Table 1. HVAC/HVDC Power Cables Callout Table

1

Connect this end to the power supply unit.

DC Power Cable Specifications

Part Number

Description

Photo

NXA-PDC-930W-PE/PI

The 930W DC power supply (NXA-PDC-930W-PE/PI) is shipped with cable CAB-48DC-40A-8AWG.

 This is a photo of the NXA-PDC-930W Power Supply

NXA-PDC-1100W-PE/PI

The 1100W DC power supply (NXA-PDC-1100W-PE/PI) is shipped with a connector already plugged into the power supply.

Use 8 AWG wire with the minimum input voltage of 40VDC, based on maximum current and thermal derating.

Regulatory Standards Compliance Specifications

The following table lists the regulatory standards compliance for the switch.

Table 2. Regulatory Standards Compliance: Safety and EMC

Specification

Description

Regulatory compliance

Products should comply with CE Markings according to directives 2004/108/EC and 2006/95/EC.

Safety

  • CAN/CSA-C22.2 No. 60950-1 Second Edition

  • CAN/CSA-C22.2 No. 62368-1-19 Third Edition

  • NRTL 60950-1 Second Edition

  • IEC 62368-1

  • EN 62368-1

  • AS/NZS 62368-1

  • GB4943

  • UL 62368-1

EMC: Emissions

  • 47CFR Part 15 (CFR 47) Class A

  • AS/NZS CISPR22 Class A

  • CISPR22 Class A

  • EN55022 Class A

  • ICES003 Class A

  • VCCI Class A

  • EN61000-3-2

  • EN61000-3-3

  • KN22 Class A

  • CNS13438 Class A

EMC: Immunity

  • EN55024

  • CISPR24

  • EN300386

  • KN 61000-4 series

RoHS

The product is RoH-6 compliant with exceptions for leaded-ball grid-array (BGA) balls and lead press-fit connectors.