callhome
callhome
Syntax Description
callhome |
Enter the callhome configuration mode |
Command Modes
- /exec/configure
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
callhome
callhome |
Enter the callhome configuration mode |
callhome send configuration
callhome |
callhome commands |
send |
send a command callhome message |
configuration |
configuration type |
callhome send diagnostic
callhome |
callhome commands |
send |
send a command callhome message |
diagnostic |
dignostic command |
callhome send eem subject s1 body s2
callhome |
callhome commands |
send |
send a command callhome message |
eem |
eem action email |
subject |
action email subject |
body |
action email body |
s1 |
Type: string length: 512 subject-text string |
s2 |
Type: string length: 512 body-text string |
[ no | default ] capability additional-paths receive [disable]
no |
Negate a command or set its defaults |
default |
Inherit values from a peer template |
capability |
Advertise capability to the peer |
additional-paths |
Additional paths capability |
receive |
Additional paths Receive capability |
disable |
Do not advertise additional paths Receive capability |
[ no | default ] capability additional-paths send [disable]
no |
Negate a command or set its defaults |
default |
Inherit values from a peer template |
capability |
Advertise capability to the peer |
additional-paths |
Additional paths capability |
send |
Additional paths Send capability |
disable |
Do not advertise additional paths Send capability |
[ no | default ] capability suppress 4-byte-as
no |
Negate a command or set its defaults |
default |
Inherit values from a peer template |
capability |
Capability |
suppress |
Suppress sending out capability |
4-byte-as |
Suppress 4-byte AS Capability |
[no] capture session session-id
no |
Negate a command or set its defaults |
capture |
Enable packet capture on this filter for session Not available in this release. |
session |
Session ID <1-48> for this session |
session-id |
Type: uinteger min: 1 max: 48 Session ID <1-48> for this session |
carrier-delay { sec_val | msec msec_val } | no carrier-delay
no |
Negate a command or set its defaults |
carrier-delay |
Specify delay for interface transitions |
sec_val |
Type: uinteger min: 0 max: 60 Carrier Transitions delay seconds |
msec |
Carrier Transitions delay milliseconds |
msec_val |
Type: uinteger min: 0 max: 1000 Carrier Transitions delay milliseconds |
cd uri0
cd |
Change current directory |
uri0 |
Type: uri Enter the name of the directory |
cdp advertise { v1 | v2 } | no cdp advertise [ v1 | v2 ]
no |
Negate a command or set its defaults |
cdp |
Configure CDP parameters |
advertise |
Highest CDP version supported on the switch |
v1 |
CDP Version 1 |
v2 |
CDP Version 2 |
[no] cdp enable
no |
Negate a command or set its defaults |
cdp |
Configure CDP interface parameters |
enable |
Enable/disable CDP on all interfaces |
[no] cdp enable
no |
Negate a command or set its defaults |
cdp |
Configure CDP interface parameters |
enable |
Enable/disable CDP on the interface |
[no] cdp format device-id { mac-address | serial-number | system-name }
no |
Negate a command or set its defaults |
cdp |
Configure CDP parameters |
format |
Device ID format for CDP |
device-id |
Device ID format for CDP |
mac-address |
Mac-address of the Chassis |
serial-number |
Chassis Serial Number/OUI |
system-name |
System name/Fully Qualified Domain Name (Default) |
[no] cdp holdtime i0
no |
Negate a command or set its defaults |
cdp |
Configure CDP parameters |
holdtime |
CDP hold time advertised (in seconds) |
i0 |
Type: integer min: 10 max: 255 CDP hold time advertised (in seconds) |
[no] cdp timer i1
no |
Negate a command or set its defaults |
cdp |
Configure CDP parameters |
timer |
CDP refresh time interval (in seconds) |
i1 |
Type: integer min: 5 max: 254 CDP refresh time interval (in seconds) |
cfs clear message-context name cfs-dyn-app-name session-id i0
cfs |
CFS parameters |
clear |
clear message context |
message-context |
clear message context |
name |
clear message context for given application |
cfs-dyn-app-name |
Type: string length: 60 Registered name of the local application |
session-id |
Seesion id of message context |
i0 |
Type: integer Seesion id |
[no] cfs distribute
no |
Negate a command or set its defaults |
cfs |
CFS configuration commands |
distribute |
Enable fabric wide distribution |
cfs eth cos i0 | no cfs eth cos [i0]
no |
Negate a command or set its defaults |
cfs |
CFS configuration commands |
eth |
ETH configurations |
cos |
Configure CFS Ethernet COS value |
i0 |
Type: integer-range COS Value Range |
[no] cfs eth distribute
no |
Negate a command or set its defaults |
cfs |
CFS configuration commands |
eth |
ETH configurations |
distribute |
Enable CFS distribution over Ethernet |
[no] cfs ipv4 { distribute | mcast-address ip0 }
no |
Negate a command or set its defaults |
cfs |
CFS configuration commands |
ipv4 |
IPv4 configurations |
distribute |
Enable CFS distribution over IPv4 |
mcast-address |
Configure IPv4 multicast address |
ip0 |
Type: ipaddr Admin scope [239.255/16, 239.192/16-239.251/16] |
[no] cfs ipv6 { distribute | mcast-address ipv60 }
no |
Negate a command or set its defaults |
cfs |
CFS configuration commands |
ipv6 |
IPv6 configurations |
distribute |
Enable CFS distribution over IPv6 |
mcast-address |
Configure IPv6 multicast address |
ipv60 |
Type: ipv6addr Admin scope [ff15::/16, ff18::/16] |
cfs merge all-fabrics name cfs-dyn-app-name [ vsan i0 ]
cfs |
CFS parameters |
merge |
Resolve the merge failures |
all-fabrics |
Fabric wide within the scope of the application |
name |
Application name |
cfs-dyn-app-name |
Type: string length: 60 Registered name of the local application |
vsan |
For logical applications only |
i0 |
Type: vsan Vsan Id |
[no] cfs region i0
no |
Negate a command or set its defaults |
cfs |
CFS configuration commands |
region |
Regions to limit the distribution scope of application(s) |
i0 |
Type: integer min: 1 max: 200 Region Id |
change-password [ old-password s1 new-password s2 ]
no |
Negate a command or set its defaults |
change-password |
Change your password |
old-password |
Current password for the user |
s1 |
Type: string length: 80 Current password for the user (clear text) |
new-password |
New password for the user |
s2 |
Type: string length: 80 New password for the user (clear text) |
channel-group channel-id [ mode { active | passive | on } ] | no channel-group [ channel-id [ mode { active | passive | on } ] ]
no |
Negate a command or set its defaults |
channel-group |
Configure port channel parameters |
mode |
Specify channeling mode |
active |
Set channeling mode to ACTIVE |
passive |
Set channeling mode to PASSIVE |
on |
Set channeling mode to ON |
channel-id |
Type: integer min: 1 max: 4096 Specify a port-channel number |
channel-group channel-id force [ mode { active | passive | on } ] | no channel-group channel-id force [ mode { active | passive | on } ]
no |
Negate a command or set its defaults |
channel-group |
add to/remove from a port-channel |
channel-id |
Type: integer min: 1 max: 4096 Specify a port-channel number |
force |
Forcefully add a port |
mode |
Specify channeling mode |
active |
Set channeling mode to ACTIVE |
passive |
Set channeling mode to PASSIVE |
on |
Set channeling mode to ON |
chassis-serial chas-ser | no chassis-serial
no |
Negate the command |
chassis-serial |
Chassis serial number |
chas-ser |
Type: string length: 20 Serial number |
checkpoint { [name] [ description descr_str ] | file file_uri }
checkpoint |
Create configuration rollback checkpoint |
name |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: system[a-zA-Z0-9_-]* | user-checkpoint-[0-9]* | auto-[0-9]* | summary | all | user length: 80 Checkpoint name |
file |
Create configuration rollback checkpoint to file |
file_uri |
Type: uri Checkpoint file path |
description |
checkpoint description for the given checkpoint |
descr_str |
Type: remainder checkpoint description(can include spaces) |
class { cmap-name [ insert-before cmap-name2 ] | class-default } | no class { cmap-name | class-default }
no |
Negate a command or set its defaults |
class |
Attach class map to policy map |
cmap-name |
Type: string antipattern: copp-system-p-+(([a-zA-Z0-9] | [- | . | _])*) length: 64 Class-map name |
insert-before |
Insert this class before another class |
cmap-name2 |
Type: string antipattern: copp-system-p-+(([a-zA-Z0-9] | [- | . | _])*) length: 64 class map name before which insertion should happen |
class-default |
Use class default |
[no] class-map [ type qos ] [any_or_all] cmap-name
no |
Negate a command or set its defaults |
class-map |
Configure a class map |
type |
Specify the type of this class-map |
qos |
Qos class |
any_or_all |
Enter match-any or match-all
|
cmap-name |
Type: string antipattern: type | typ | ty | t | class-default | class | default length: 40 class-map name |
[no] class-map type control-plane [opt_any_or_all] cmap-name
no |
Negate a command or set its defaults |
class-map |
Configure a class map |
type |
Specify the type of this class-map |
control-plane |
Control-Plane |
opt_any_or_all |
Enter match-any or match-all
|
cmap-name |
Type: string antipattern: copp-system-p-+(([a-zA-Z0-9] | [- | . | _])*) length: 64 Class-map name |
[no] class-map type network-qos match-any cmap-name-nq
no |
Negate a command or set its defaults |
class-map |
Configure a class map |
type |
Specify the type of this class-map |
network-qos |
Network QoS class |
match-any |
Match on any criteria |
cmap-name-nq |
Type: string antipattern: type | typ | ty | t | class-default | class | default length: 40 class-map name |
[no] class-map type queuing any_or_all { xxx cmap-enum-name | cmap-dce-name | cmap-name-hque }
no |
Negate a command or set its defaults |
class-map |
Configure a class map |
type |
Specify the type of this class-map |
queuing |
Queuing class |
any_or_all |
Enter match-any
|
cmap-enum-name |
|
xxx |
xxx Not available in this release. |
cmap-dce-name |
Type: string antipattern: type | typ | ty | t | class-default | class | default length: 40 Queuing class-map name |
cmap-name-hque |
Type: string antipattern: type | typ | ty | t | class-default | class | default length: 40 Hierarchical class-map name |
[no] class [ type qos ] cmap-name [ insert-before [ type qos1 ] cmap-name2 ]
no |
Negate a command or set its defaults |
class |
Policy Criteria |
type |
Specify the type of class |
qos |
Match on Qos class |
cmap-name |
Type: string antipattern: type | typ | ty | t | class-default | class | default length: 40 class map name |
insert-before |
Insert this class before another class |
qos1 |
Insert before Qos class |
cmap-name2 |
Type: string length: 40 class map name |
[no] class class-default
no |
Negate a command or set its defaults |
class |
Policy Criteria |
class-default |
System default class matching otherwise unclassified packets |
[no] class type network-qos cmap-name-nq
no |
Negate a command or set its defaults |
class |
Match on network-qos class-map |
type |
Specify the type of this class-map |
network-qos |
Network QoS policy |
cmap-name-nq |
Type: string antipattern: type | typ | ty | t | class-default | class | default length: 40 Match class-map name |
[no] class type network-qos class-default
no |
Negate a command or set its defaults |
class |
Match on network-qos class-map |
type |
Specify the type of this class-map |
network-qos |
Network QoS policy |
class-default |
System default class matching otherwise not classified cos values |
[no] class type queuing { xxx cmap-enum-name | cmap-dce-name | cmap-name-hque } [ insert-before type queuing1 yyy xcmap-enum-name ]
xxx |
xxx Not available in this release. |
yyy |
yyy Not available in this release. |
no |
Negate a command or set its defaults |
class |
Policy Criteria |
type |
Specify the type of class |
queuing |
Match on Queuing class |
cmap-enum-name |
|
cmap-dce-name |
Type: string antipattern: type | typ | ty | t | class-default | class | default length: 40 Queuing class-map name |
cmap-name-hque |
Type: string antipattern: type | typ | ty | t | class-default | class | default length: 40 Hierarchical class-map name |
insert-before |
Insert this class before another class |
queuing1 |
Insert before Queuing class |
xcmap-enum-name |
|
clean ip bfd
clean |
Clean internal datastructures |
ip |
IP related information |
bfd |
clean ip bfd datastructures |
clear { ip eigrp [eigrp-ptag] neighbors { * | address | interface } [soft] [no-goodbye] [ vrf { vrf-name | vrf-known-name | all } ] | ipv6 eigrp [eigrp-ptag] neighbors { * | ipv6-addr | interface } [soft] [no-goodbye] [ vrf { vrf-name | vrf-known-name | all } ] }
clear |
Reset functions |
ip |
Clear IP commands |
ipv6 |
Clear IPv6 commands |
eigrp |
EIGRP clear commands |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
eigrp-ptag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: accounting | all | fsm | graceful-restart | interface | interfaces | internal | neighbor | neighbors | notifications | packets | prefix | route | route-map | shutdown | summary | topology | traffic | transmit | urib | vrf | vrf-events length: 20 Process tag |
neighbors |
Clear EIGRP neighbors |
* |
Clear all EIGRP neighbors |
address |
Type: ipaddr IP-EIGRP neighbor address |
ipv6-addr |
Type: ipv6addr IPv6 neighbor address |
interface |
Type: interface Interface |
soft |
Soft reset |
no-goodbye |
No goodbye |
clear { ip eigrp [eigrp-ptag] topology { address mask | prefix } [ vrf { vrf-name | vrf-known-name | all } ] | ipv6 eigrp [eigrp-ptag] topology ipv6-prefix [ vrf { vrf-name | vrf-known-name | all } ] }
clear |
Reset functions |
ip |
Clear IP commands |
ipv6 |
Clear IPv6 commands |
eigrp |
EIGRP clear commands |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
eigrp-ptag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: accounting | all | fsm | graceful-restart | interface | interfaces | internal | neighbor | neighbors | notifications | packets | prefix | route | route-map | shutdown | summary | topology | traffic | transmit | urib | vrf | vrf-events length: 20 Process tag |
topology |
Clear IP-EIGRP topology table entry |
address |
Type: ipaddr Network to display information about |
mask |
Type: ipaddr Network mask |
prefix |
Type: ipprefix IP prefix <network>/<length>, e.g., 192.168.0.0/16 |
ipv6-prefix |
Type: ipv6prefix IPv6 prefix <network>/<length> |
clear { keystore | sksd } [ index | name ]
clear |
Reset functions |
keystore |
Clear all records in the keystore |
sksd |
Clear all records in the keystore/sksd-chip |
index |
Type: uinteger Clear secret at index <index> |
name |
Type: string Clear secret with name <name> |
clear { ipv6 route [ vrf { vrf-name | vrf-known-name | vrf-all } ] | routing [ vrf { vrf-name | vrf-known-name } ] ipv6 [unicast] [ topology topology-name ] } { all | { ipv6-addr | ipv6-prefix } [ nh-addr nh-interface ] } [no-ufdm]
clear |
Reset functions |
route |
Clear routing information |
routing |
Clear routing information |
vrf |
Clear per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
<vrf-all> |
Display information for all VRFs |
ipv6 |
Clear IPv6 commands |
unicast |
Clear unicast information |
topology |
Clear per-topology information |
topology-name |
Type: string Topology name |
<all> |
Clear all routes |
ipv6-addr |
Type: ipv6addr Clear single host route |
ipv6-prefix |
Type: ipv6prefix Clear single exact match route |
nh-addr |
Type: ipv6addr Clear single path |
nh-interface |
Type: interface Interface Name |
no-ufdm |
Do not tell UFDM about the change |
clear { ip route [ vrf { vrf-name | vrf-known-name | vrf-all } ] | routing [ vrf { vrf-name | vrf-known-name } ] [ ip | ipv4 ] [unicast] [ topology topology-name ] } { all | { ip-addr | ip-prefix } [nh-addr] [nh-interface] } [no-ufdm]
clear |
Reset functions |
route |
Clear routing information |
routing |
Clear routing information |
vrf |
Clear per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
<vrf-all> |
Display information for all VRFs |
ip |
Clear IP commands |
ipv4 |
Clear IP commands |
unicast |
Clear unicast information |
topology |
Clear per-topology information |
topology-name |
Type: string Topology name |
<all> |
Clear all routes |
ip-addr |
Type: ipaddr Clear single host route |
ip-prefix |
Type: ipprefix Clear single exact match route |
nh-addr |
Type: ipaddr Clear single path |
nh-interface |
Type: interface Interface Name |
no-ufdm |
Do not tell UFDM about the change |
clear [ip_ipv6_mac] access-list counters [name]
clear |
Reset functions |
ip_ipv6_mac |
IP/IPv6/MAC
|
access-list |
Clear access list statistical information |
counters |
Clear access list counters |
name |
Type: string length: 64 List name |
clear access-list hardware counters [ module module ]
clear |
Reset functions |
access-list |
Clear access list statistical information |
hardware |
hardware information |
counters |
Clear access list counters |
module |
Slot/module |
module |
Type: integer Slot/module number |
clear accounting log
clear |
Reset functions |
accounting |
Clear accounting log(s) in all vdcs |
log |
Clear the accounting log(s) in all vdcs |
clear bfd statistics
clear |
Clear |
bfd |
bfd |
statistics |
statistics |
clear bgp { ipv4 { unicast | multicast } policy statistics { redistribute [ { eigrp | isis | ospf | rip } tag | static | direct | amt | lisp ] | neighbor neighbor-id [ default-originate | { route-map | filter-list | prefix-list } { in | out } ] | dampening | network { ip-addr mask ip-mask | ip-prefix } | aggregate-address { ip-addr ip-mask | ip-prefix } { suppress-map | advertise-map } } | { vpnv4 | vpnv6 } unicast policy statistics neighbor neighbor-id [ { route-map | filter-list | prefix-list } { in | out } ] | ipv6 { unicast | multicast } policy statistics { redistribute [ { eigrp | isis | ospfv3 | rip } tag | static | direct | amt | lisp ] | neighbor { neighbor-id | ipv6-neighbor-id } [ default-originate | { route-map | filter-list | prefix-list } { in | out } ] | dampening | network ipv6-prefix | aggregate-address ipv6-prefix { suppress-map | advertise-map } } }
clear |
Reset functions |
ipv4 |
Clear IPv4 address-family |
ipv6 |
Clear IPv6 address-family |
vpnv4 |
Clear VPNv4 address-family Not available in this release. |
vpnv6 |
Clear VPNv6 address-family Not available in this release. |
bgp |
Clear BGP sessions |
unicast |
Clear unicast address-family |
multicast |
Clear multicast address-family |
policy |
Clear policy related information |
statistics |
Clear Route Filter statistics |
redistribute |
Statistics for redistribution |
isis |
ISO IS-IS |
ospf |
Open Shortest Path First (OSPF) |
ospfv3 |
Open Shortest Path First v3 |
rip |
Routing Information Protocol |
eigrp |
Enhanced Interior Gateway Protocol |
static |
Static routes |
direct |
Directly connected |
amt |
AMT anycast prefix |
lisp |
LISP EID-prefixes |
tag |
Type: string Source protocol tag |
neighbor |
Clear neighbor specific counters |
neighbor-id |
Type: ipaddr Neighbor IPv4 address |
ipv6-neighbor-id |
Type: ipv6addr Neighbor IPv6 address |
route-map |
Neighbor route-map |
prefix-list |
Neighbor prefix-list |
filter-list |
Neighbor filter-list |
out |
Outbound policy |
in |
Inbound policy |
default-originate |
Default-originate policy |
dampening |
Clear dampening info |
network |
Configured IP prefix to advertise |
aggregate-address |
Configured BGP aggregate prefixes |
suppress-map |
Statistics of suppress policy |
advertise-map |
Statistics of advertise policy |
ip-addr |
Type: ipaddr IP network advertised |
mask |
Configured mask of the IP prefix advertised |
ip-mask |
Type: ipaddr Dotted 4-octet mask |
ip-prefix |
Type: ipprefix IP prefix in CIDR format |
ipv6-prefix |
Type: ipv6prefix IPv6 prefix format: xxxx:xxxx/ml, xxxx:xxxx::/ml, xxxx::xx/128 |
clear bgp event-history { bgp-event-hist | detail | all | msgs }
clear |
Reset functions |
bgp |
Clear BGP sessions |
event-history |
Clear event-history buffers |
bgp-event-hist |
Type: string Event History |
detail |
Show detailed event logs |
all |
All event history buffers |
msgs |
Clear message logs of BGP |
clear bootvar log
clear |
Reset functions |
bootvar |
Clear the bootvar log |
log |
Clear the bootvar log |
clear cdp { counters [ interface if0 ] | table [ interface1 if1 ] }
clear |
Reset functions |
cdp |
Cisco Discovery Protocol |
counters |
Clear CDP counters on all interfaces |
interface |
Clear CDP counters on an interface |
if0 |
Type: interface |
table |
Clear CDP cache on all interfaces |
interface1 |
Clear CDP cache on an interface |
if1 |
Type: interface |
clear checkpoint database [ user | system ]
clear |
Reset functions |
checkpoint |
Clear configuration rollback checkpoint |
database |
Clear configuration rollback checkpoint database |
user |
Clear configuration rollback checkpoint database for user checkpoints |
system |
Clear configuration rollback checkpoint database for system checkpoints |
clear cli history
clear |
Reset functions |
cli |
debug cli |
history |
history of cli commands |
clear copp statistics
clear |
Reset functions |
copp |
Clear policy information for copp |
statistics |
Clear statistics |
clear cores
clear |
Reset functions |
cores |
clear all core dumps for the switch |
clear cores archive [ file s0 ]
clear |
Reset functions |
cores |
clear all cores for this vdc |
archive |
clear all core dump files for this vdc from logflash on this module |
file |
delete a core file on logflash |
s0 |
Type: string Name of file in directory 'core' |
clear counters
clear |
Reset functions |
counters |
Clear counters |
clear counters buffers [ module module [ instance instance ] ] [ __readonly__ clear_valid ]
clear |
Reset functions |
counters |
Clear counters |
buffers |
Clear system buffer max cell usage counter |
module |
Slot/module |
module |
Type: integer Slot/module number |
instance |
ASIC Instance Number |
instance |
Type: integer min: 0 max: 3 ASIC Instance Number in Decimal |
__readonly__ |
Read Only |
clear_valid |
Type: string Clear |
clear counters interface ifindex
clear |
Reset functions |
counters |
Clear counters |
interface |
Clear interface counters |
ifindex |
Type: interface-mrange Clear interface counters |
clear counters interface all
clear |
Reset functions |
counters |
Clear counters |
interface |
Clear interface counters |
all |
Clear all interface counters |
clear { ip | ipv6 } eigrp [eigrp-ptag] accounting [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ip |
Clear IP commands |
ipv6 |
Clear IPv6 commands |
eigrp |
EIGRP clear commands |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
eigrp-ptag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: accounting | all | fsm | graceful-restart | interface | interfaces | internal | neighbor | neighbors | notifications | packets | prefix | route | route-map | shutdown | summary | topology | traffic | transmit | urib | vrf | vrf-events length: 20 Process tag |
accounting |
Clear IP-EIGRP accounting statistics |
clear { ip | ipv6 } eigrp [eigrp-ptag] event-history [ fsm | packet | rib | cli | l3vpn | ha | all ]
clear |
Reset functions |
ip |
Clear IP commands |
ipv6 |
Clear IPv6 commands |
eigrp |
EIGRP clear commands |
eigrp-ptag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: accounting | all | fsm | graceful-restart | interface | interfaces | internal | neighbor | neighbors | notifications | packets | prefix | route | route-map | shutdown | summary | topology | traffic | transmit | urib | vrf | vrf-events length: 20 Process tag |
event-history |
Clear the event history buffers |
fsm |
FSM log of EIGRP |
packet |
Packet log of EIGRP |
rib |
RIB log of EIGRP |
l3vpn |
L3VPN log of EIGRP |
ha |
HA log of EIGRP |
cli |
EIGRP CLI related events |
all |
All event history buffers |
clear { ip | ipv6 } eigrp [eigrp-ptag] events [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ip |
Clear IP commands |
ipv6 |
Clear IPv6 commands |
eigrp |
EIGRP clear commands |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
eigrp-ptag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: accounting | all | fsm | graceful-restart | interface | interfaces | internal | neighbor | neighbors | notifications | packets | prefix | route | route-map | shutdown | summary | topology | traffic | transmit | urib | vrf | vrf-events length: 20 Process tag |
events |
Clear IP-EIGRP event logs |
clear { ip | ipv6 } eigrp [eigrp-ptag] logging [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ip |
Clear IP commands |
ipv6 |
Clear IPv6 commands |
eigrp |
EIGRP clear commands |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
eigrp-ptag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: accounting | all | fsm | graceful-restart | interface | interfaces | internal | neighbor | neighbors | notifications | packets | prefix | route | route-map | shutdown | summary | topology | traffic | transmit | urib | vrf | vrf-events length: 20 Process tag |
logging |
Stop IP-EIGRP event logging |
clear { ip | ipv6 } eigrp [eigrp-ptag] redistribution [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ip |
Clear IP commands |
ipv6 |
Clear IPv6 commands |
eigrp |
EIGRP clear commands |
eigrp-ptag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: accounting | all | fsm | graceful-restart | interface | interfaces | internal | neighbor | neighbors | notifications | packets | prefix | route | route-map | shutdown | summary | topology | traffic | transmit | urib | vrf | vrf-events length: 20 Process tag |
vrf |
Display per-VRF information |
vrf-name |
Type: string pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
redistribution |
Clear EIGRP redistributed information |
clear { ip | ipv6 } eigrp [eigrp-ptag] traffic [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ip |
Clear IP commands |
ipv6 |
Clear IPv6 commands |
eigrp |
EIGRP clear commands |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
eigrp-ptag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: accounting | all | fsm | graceful-restart | interface | interfaces | internal | neighbor | neighbors | notifications | packets | prefix | route | route-map | shutdown | summary | topology | traffic | transmit | urib | vrf | vrf-events length: 20 Process tag |
traffic |
Clear IP-EIGRP traffic statistics |
clear fabricpath counters dropped [ module module ] [ __readonly__ mod_bmp vdc_id msg ]
clear |
Reset functions |
fabricpath |
clear fabricpath information |
counters |
Clear fabricpath counters |
dropped |
Packets dropped due to various vlan errors |
module |
Specify one counter |
module |
Type: integer Module number |
__readonly__ |
Read Only |
mod_bmp |
Type: uinteger Bitmap of valid modules |
vdc_id |
Type: integer Current VDC id |
msg |
Type: string Message to give details about command execution |
clear forwarding cumulative counter [ all | v4_ucast_add | v4_ucast_del | v6_ucast_add | v6_ucast_del ] [ module module ]
clear |
clear |
forwarding |
forwarding information |
cumulative |
accumulated prefix add/delete count |
counter |
counter |
all |
all |
v4_ucast_add |
IPv4 unicast route add count |
v4_ucast_del |
IPv4 unicast route delete count |
v6_ucast_add |
IPv6 unicast route add count |
v6_ucast_del |
IPv6 unicast route delete count |
module |
slot |
module |
Type: integer slot number |
clear forwarding distribution lisp counters all
clear | |
forwarding |
forwarding |
distribution |
fib distribution information |
lisp |
lisp application |
counters |
counters |
all |
all vrf's |
clear forwarding [ ipv4 | ip ] [unicast] inconsistency
clear |
clear |
forwarding |
forwarding |
ip |
ipv4 |
ipv4 |
ipv4 |
unicast |
unicast |
inconsistency |
route inconsistency check |
clear forwarding ipv4 multicast counters [ vrf { vrf-name | vrf-known-name | all } ] { [ group gaddr [ source saddr ] ] | [ source saddr [ group gaddr ] ] } [ module module ]
clear | |
forwarding |
fib information |
vrf |
Specify VRF |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
ipv4 |
Ipv4 |
multicast |
Multicast IPv4 information |
counters | |
group |
Multicast IPv4 Group specific info |
gaddr |
Type: ipaddr Multicast IPv4 Group Address |
source |
Multicast IPv4 Source specific info |
saddr |
Type: ipaddr Multicast IPv4 Source Address |
module |
slot Available only in the 9500 series. |
module |
Type: integer slot number |
clear forwarding ipv6-l3-route-history
clear |
Clear bintrace entries |
forwarding |
forwarding |
ipv6-l3-route-history |
IPV6 L3 Route history |
clear forwarding ipv6 adjacency [ vrf vrf-name ] { ip-addr | all_adjs } module { all_modules | module } [force-delete] [no-urib]
clear | |
forwarding |
forwarding information |
ipv6 |
ipv6 |
adjacency |
adjacency |
vrf |
delete routes for a specific vrf |
vrf-name |
Type: string VRF name |
ip-addr |
Type: ipv6addr IPV6 source address |
all_adjs |
delete all adjs |
module |
module |
all_modules |
all module's |
module |
Type: integer module number |
no-urib |
Do not tell URIB about changes |
force-delete |
Forcefully remove adj |
clear forwarding ipv6 [unicast] inconsistency
clear |
clear |
forwarding |
forwarding |
ipv6 |
ipv6 |
unicast |
unicast |
inconsistency |
route inconsistency check |
clear forwarding ipv6 route [ vrf vrf-name ] { prefix | all_routes } module { all_modules | module } [no-urib]
clear | |
forwarding |
forwarding information |
ipv6 |
ipv6 |
route |
route |
vrf |
delete routes for a specific vrf |
vrf-name |
Type: string VRF name |
prefix |
Type: ipv6prefix delete specific prefix |
all_routes |
delete all routes |
module |
module |
all_modules |
all module's |
module |
Type: integer module number |
no-urib |
Do not tell URIB about changes |
clear forwarding ipv6 multicast counters [ vrf { vrf-name | vrf-known-name | all } ] { [ group gaddr [ source saddr ] ] | [ source saddr [ group gaddr ] ] } [ module module ]
clear | |
forwarding |
fib information |
vrf |
Specify VRF |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
ipv6 |
Ipv6 |
multicast |
Multicast IPv6 information |
counters | |
group |
Multicast IPv6 Group specific info |
gaddr |
Type: ipv6addr Multicast IPv6 Group Address |
source |
Multicast IPv6 Source specific info |
saddr |
Type: ipv6addr Multicast IPv6 Source Address |
module |
slot Available only in the 9500 series. |
module |
Type: integer slot number |
clear forwarding l2-oiflist-history
clear |
Clear bintrace entries |
forwarding |
forwarding |
l2-oiflist-history |
L2 Oiflist history |
clear forwarding l2-route-history
clear |
Clear bintrace entries |
forwarding |
forwarding |
l2-route-history |
L2 Route history |
clear forwarding l2mcast info statistics [ module num ]
clear |
Clear all entries |
forwarding |
Forwarding Information |
l2mcast |
Layer-2 multicast |
info |
L2mcast Internal Info |
statistics |
L2mcast Internal Info Statistics |
module |
Slot |
num |
Type: integer Slot number |
clear forwarding l2vpn trace member-history
clear |
Clear bintrace entries |
forwarding |
forwarding |
l2vpn |
L2VPN |
trace |
internal trace |
member-history |
member history |
clear forwarding l3-route-history
clear |
Clear bintrace entries |
forwarding |
forwarding |
l3-route-history |
L3 Route history |
clear forwarding [ ip | ipv4 ] adjacency [ vrf vrf-name ] { ip-addr | all_routes } module { all_modules | module } [force-delete] [no-urib]
clear | |
forwarding |
forwarding information |
ip |
ipv4 |
ipv4 |
ipv4 |
adjacency |
adjacency |
vrf |
delete routes for a specific vrf |
vrf-name |
Type: string VRF name |
ip-addr |
Type: ipaddr IPV4 source address |
all_routes |
delete all routes |
module |
module |
all_modules |
all module's |
module |
Type: integer module number |
no-urib |
Do not tell URIB about changes |
force-delete |
Forcefully remove adj |
clear forwarding [ ip | ipv4 ] route [ vrf vrf-name ] { prefix | all_routes } module { all_modules | module } [no-urib]
clear | |
forwarding |
forwarding information |
ip |
ipv4 |
ipv4 |
ipv4 |
route |
route |
vrf |
delete routes for a specific vrf |
vrf-name |
Type: string VRF name |
prefix |
Type: ipprefix delete specific prefix |
all_routes |
delete all routes |
module |
module |
all_modules |
all module's |
module |
Type: integer module number |
no-urib |
Do not tell URIB about changes |
clear forwarding mpls trace adj-history [ module module ]
clear |
Clear bintrace entries |
forwarding |
forwarding |
mpls |
mpls |
trace |
internal trace |
adj-history |
adjacency history |
module |
slot |
module |
Type: integer slot number |
clear forwarding mpls trace ecmp-history [ module module ]
clear |
Clear bintrace entries |
forwarding |
forwarding |
mpls |
mpls |
trace |
internal trace |
ecmp-history |
ECMP history |
module |
slot |
module |
Type: integer slot number |
clear forwarding mpls trace label-history [ module module ]
clear |
Clear bintrace entries |
forwarding |
forwarding |
mpls |
mpls |
trace |
internal trace |
label-history |
label history |
module |
slot |
module |
Type: integer slot number |
clear forwarding mpls trace te-history [ module module ]
clear |
Clear bintrace entries |
forwarding |
forwarding |
mpls |
mpls |
trace |
internal trace |
te-history |
TE history |
module |
slot |
module |
Type: integer slot number |
clear forwarding oiflist-history
clear |
Clear bintrace entries |
forwarding |
forwarding |
oiflist-history |
Oiflist history |
clear forwarding otv oiflist-history
clear |
Clear bintrace entries |
forwarding |
forwarding |
otv |
Display OTV information |
oiflist-history |
Oiflist history |
clear forwarding trace ecmp-history [ module module ]
clear |
Clear bintrace entries |
forwarding |
forwarding |
trace |
internal trace |
ecmp-history |
ECMP history |
module |
slot |
module |
Type: integer slot number |
clear forwarding trace mfib oif-history
clear |
Clear bintrace entries |
forwarding |
forwarding |
trace |
internal trace |
mfib |
mfib entries |
oif-history |
oif history |
clear forwarding trace mfib oiflist-history
clear |
Clear bintrace entries |
forwarding |
forwarding |
trace |
internal trace |
mfib |
mfib entries |
oiflist-history |
oiflist history |
clear forwarding trace mfib otv oif-history
clear |
Clear bintrace entries |
forwarding |
forwarding |
trace |
internal trace |
mfib |
mfib entries |
otv |
otv entries |
oif-history |
oif history |
clear forwarding trace mfib otv oiflist-history
clear |
Clear bintrace entries |
forwarding |
forwarding |
trace |
internal trace |
mfib |
mfib entries |
otv |
otv entries |
oiflist-history |
oiflist history |
clear forwarding trace mfib otv v4-route-history
clear |
Clear bintrace entries |
forwarding |
forwarding |
trace |
internal trace |
mfib |
mfib entries |
otv |
otv entries |
v4-route-history |
v4 route history |
clear forwarding trace mfib otv v6-route-history
clear |
Clear bintrace entries |
forwarding |
forwarding |
trace |
internal trace |
mfib |
mfib entries |
otv |
otv mfib entries |
v6-route-history |
v6 route history |
clear forwarding trace mfib platform oiflist-history
clear |
Clear |
forwarding |
Forwarding information |
trace |
internal trace |
mfib |
mfib entries |
platform |
platform information |
oiflist-history |
Oiflist history |
clear forwarding trace mfib v4-route-history
clear |
Clear bintrace entries |
forwarding |
forwarding |
trace |
internal trace |
mfib |
clear mfib entries |
v4-route-history |
v4 route history |
clear forwarding trace mfib v6-route-history
clear |
Clear bintrace entries |
forwarding |
forwarding |
trace |
internal trace |
mfib |
mfib entries |
v6-route-history |
v6 route history |
clear forwarding trace otv-adj-history [ module module ]
clear |
Clear bintrace entries |
forwarding |
forwarding |
trace |
internal trace |
otv-adj-history |
otv adj history |
module |
slot |
module |
Type: integer slot number |
clear forwarding trace otv-vlan-history [ module module ]
clear |
Clear bintrace entries |
forwarding |
forwarding |
trace |
internal trace |
otv-vlan-history |
otv vlan prefix history |
module |
slot |
module |
Type: integer slot number |
clear forwarding trace v4-adj-history [ module module ]
clear |
Clear bintrace entries |
forwarding |
forwarding |
trace |
internal trace |
v4-adj-history |
V4 adjacency history |
module |
slot |
module |
Type: integer slot number |
clear forwarding trace v4-pfx-history [ module module ]
clear |
Clear bintrace entries |
forwarding |
forwarding |
trace |
internal trace |
v4-pfx-history |
V4 prefix history |
module |
slot |
module |
Type: integer slot number |
clear forwarding trace v4-rnh-history [ module module ]
clear |
Clear bintrace entries |
forwarding |
forwarding |
trace |
internal trace |
v4-rnh-history |
V4 rnh history |
module |
slot |
module |
Type: integer slot number |
clear forwarding trace v6-adj-history [ module module ]
clear |
Clear bintrace entries |
forwarding |
forwarding |
trace |
internal trace |
v6-adj-history |
V6 adjacency history |
module |
slot |
module |
Type: integer slot number |
clear forwarding trace v6-pfx-history [ module module ]
clear |
Clear bintrace entries |
forwarding |
forwarding |
trace |
internal trace |
v6-pfx-history |
V6 prefix history |
module |
slot |
module |
Type: integer slot number |
clear forwarding trace v6-rnh-history [ module module ]
clear |
Clear bintrace entries |
forwarding |
forwarding |
trace |
internal trace |
v6-rnh-history |
V6 rnh history |
module |
slot |
module |
Type: integer slot number |
clear forwarding trace vobj-history [ module module ]
clear |
Clear bintrace entries |
forwarding |
forwarding |
trace |
internal trace |
vobj-history |
vobj history |
module |
slot |
module |
Type: integer slot number |
clear frame traffic
clear |
Reset functions |
frame |
Clear layer-2 frame statistics to/from the Route Processor |
traffic |
Clear layer-2 frame statistics to/from the Route Processor |
clear fs-daemon log
clear |
Reset functions |
fs-daemon |
Clear the fs daemon log |
log |
Clear the fs daemon log |
clear hardware [forwarding] ip verify { all | address { source { broadcast | multicast } | class-e | destination zero | identical | reserved } | checksum | protocol | fragment | length { minimum | consistent | maximum { max-frag | udp | max-tcp } } | tcp tiny-frag | version } [ module module ]
clear |
Reset functions |
hardware |
Show hardware information |
forwarding |
Show hardware information for forwarding path |
ip |
IPv4 and IPv6 protocols Not available in this release. |
verify |
IP packet validation checks in hardware Not available in this release. |
class-e |
Class E IDS check Not available in this release. |
all |
All IP packet validation checks |
address |
IPv4 and IPv6 Source and destination address validation |
source |
Check source address |
broadcast |
Source address is 255.255.255.255 |
multicast |
Source address is 224.x.x.x |
destination |
Check destination address Not available in this release. |
zero |
Destination address is 0.0.0.0 |
identical |
Same IP SA and DA |
reserved |
Source address is 127.x.x.x Not available in this release. |
checksum |
Verify IPv4 and IPv6 packet checksum |
protocol |
Verify IP procotol |
fragment |
Check IPv4 and IPv6 fragment with non-zero offset and DF bit active |
length |
Validate IPv4 packet header and payload length |
minimum |
Minimum IPv4 header length |
consistent |
Actual frame size is equal to or more than IPv4 length plus ethernet header |
maximum |
Check max fragment offset and payload length |
max-frag |
Fragment offset field value |
udp |
Maximum UDP length has to be less than IPv4 payload length |
max-tcp |
Maximum TCP length has to be less than IPv4 payload length |
tcp |
Validate TCP packet header |
tiny-frag |
Check TCP tiny fragment |
version |
Must be 4 for an ethertype of IPv4 (0x0800) |
module |
Specify a module number |
module |
Type: integer Specify a module number |
clear hardware rate-limiter { all | layer-3 { l3-opts | multicast mcast-opts } | layer-2 l2-opts | opts | f1 f1-opts } [ module module ]
clear |
Reset functions |
hardware |
Show hardware information |
rate-limiter |
Clear Rate-Limiter statistics |
all |
Clear all Rate-Limiter statistics |
layer-3 |
Layer-3 control and Routed packets |
l3-opts |
|
multicast |
Multicast data packets |
mcast-opts |
|
layer-2 |
Layer-2 control and Bridged packets Not available in this release. |
l2-opts |
|
opts |
|
f1 |
Control packets from F1 modules to supervisor Not available in this release. |
f1-opts |
|
module |
Specify a module number |
module |
Type: integer Specify a module number |
clear hsrp counters [value] | clear hsrp state-history [ interface interface-id ] [ group group-id ]
clear |
Reset functions |
hsrp |
HSRP commands |
counters |
Internal counters |
value |
Type: integer Counter to be cleared |
state-history |
Clear Groups' state history |
interface |
Groups on this interface |
interface-id |
Type: interface Interface |
group |
Group number |
group-id |
Type: integer min: 0 max: 4095 Group Number |
clear icmpv6 cache interface [intf]
clear |
Reset functions |
icmpv6 |
ICMPv6 Commands |
cache |
Clear icmpv6 cache |
interface |
Clear icmpv6 interface information |
intf |
Type: interface Interface name to clear |
clear inactive-config component-list+
clear |
Reset functions |
inactive-config |
Clear Inactive config |
component-list |
component list
|
clear install all failed-standby
clear |
Reset functions |
install |
Clear the installer log |
all |
Clear the install all log |
failed-standby |
Clear the failed-standby log |
clear install failure-reason
clear |
Reset functions |
install |
Clear the installer log |
failure-reason |
Clear the install failure-reason log |
clear install log-history { all | oldest i0 }
clear |
Reset functions |
install |
Install related show commands |
log-history |
Patch installer historical logs |
all |
Delete complete history log |
oldest |
oldest Delete the oldest <n> install log-history points |
i0 |
Type: uinteger min: 1 max: 4294967294 Number of log-history points to delete |
clear install status
clear |
Reset functions |
install |
Clear the installer log |
status |
Clear the installer status log |
clear ip { netstack mroute | mroute data-created } { all | group-prefix | group [source] } [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ip |
Clear IP commands |
netstack |
Netstack's local cache |
mroute |
Clear multicast routing table |
data-created |
Clear all Data-created PIM ASM (S,G) routes |
<all> |
Clear all routes |
group-prefix |
Type: ipprefix Clear all routes within the Group prefix |
group |
Type: ipaddr Clear all sources matching the Group |
source |
Type: ipaddr Clear a (S,G) route |
vrf |
Clear information for particular VRF |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
clear ip adjacency cache interface [intf]
clear |
Reset functions |
ip |
Clear IP commands |
adjacency |
Configure Adjmgr |
cache |
Clear adjacency cache |
interface |
Clear adjacency interface information |
intf |
Type: interface Interface name to clear |
clear ip adjacency [ vrf { vrf-name | vrf-known-name } ] { ip-addr | * } no-ufdm
clear |
Reset functions |
ip |
Clear IP commands |
adjacency |
Clear Adjacency |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
ip-addr |
Type: ipaddr IPV4 source address |
* |
Delete all adjacency in this context |
no-ufdm |
Create inconsistancy in adjacency |
clear ip adjacency statistics
clear |
Reset functions |
ip |
Clear IP commands |
adjacency |
Clear Adjacency |
statistics |
Clear Adjacency Statistics |
clear ip arp [ interface | ip-address ] [ vrf { vrf-name | vrf-known-name | all } ] [force-delete]
clear |
Reset functions |
ip |
Clear IP commands |
arp |
Clear ARP table and statistics |
interface |
Type: interface ARP interface |
ip-address |
Type: ipaddr IP address |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Clear ARP entries for all vrfs |
force-delete |
Clear the entries from ARP table without refresh |
clear ip arp cache interface [intf]
clear |
Reset functions |
ip |
Clear IP commands |
arp |
arp |
cache |
Clear arp cache |
interface |
Clear arp interface information |
intf |
Type: interface Interface name to clear |
clear ip arp event-history { packet | event | sync-event | ip-sync-event | control | ha | errors | lcache | lcache-errors | client-event | client-errors | snmp | cli | all }
clear |
Reset functions |
ip |
IP events |
arp |
ARP events |
event-history |
Clear the event history buffers |
packet |
inst packet logs |
event |
Internal event logs |
sync-event |
CFS and MCECM related event logs |
ip-sync-event |
L3 over vpc related event logs |
control |
ARP control event logs |
ha |
HA and GR logs |
errors |
inst error logs |
lcache |
lcache logs |
lcache-errors |
lcache_error logs |
client-event |
Client_event logs |
client-errors |
Client_error logs |
cli |
clear cli logs |
snmp |
SNMP logs |
all |
All event history buffers |
clear ip arp inspection log
clear |
Reset functions |
ip |
Clear ip counters |
arp |
Clear State of ARP features |
inspection |
Clear State of ARP Inspection Not available in this release. |
log |
Log Buffer |
clear ip arp inspection statistics vlan vlan-id
clear |
Reset functions |
ip |
Clear ip counters |
arp |
Clear State of ARP features |
inspection |
Clear State of ARP Inspection Not available in this release. |
statistics |
Statistics |
vlan |
Vlan range |
vlan-id |
Type: vlan-mrange VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19 |
clear ip arp statistics [interface] [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ip |
Clear IP commands |
arp |
Clear ARP table and statistics |
interface |
Type: interface ARP interface |
statistics |
Clear ARP statistics |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Clear ARP statistics for all vrfs |
clear ip arp tunnel-statistics
clear |
Reset functions |
ip |
Clear IP commands |
arp |
Display ARP table and statistics |
tunnel-statistics |
Clear ARP statistics for tunneled packets |
clear ip arp vpc-statistics
clear |
Reset functions |
ip |
Clear IP commands |
arp |
Display ARP table and statistics |
vpc-statistics |
Clear ARP vPC statistics |
clear ip cache interface [intf]
clear |
Reset functions |
ip |
Clear IP commands |
cache |
Clear ip cache |
interface |
Clear ip interface information |
intf |
Type: interface Interface name to clear |
clear ip dhcp global statistics
clear |
Reset functions |
ip |
Clear ip counters |
dhcp |
Clear State of DHCP features |
global |
Clear State of DHCP global stats |
statistics |
DHCP snooping statistics |
clear ip dhcp relay statistics [ interface intf | interface intf serverip ip-addr-val [ use-vrf vrf-name ] ]
clear |
Reset functions |
ip |
Clear ip counters |
dhcp |
Clear State of DHCP features |
relay |
Clear State of DHCP relay stats |
statistics |
DHCP Relay statistics |
interface |
input interface |
intf |
Type: interface interface |
serverip |
Helper address |
ip-addr-val |
Type: ipaddr IP address |
use-vrf |
helper address VRF membership |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf length: 32 VRF name |
clear ip dhcp snooping binding [ vlan vlan-id mac mac-addr ip ip-addr interface interface-id | vlan vlan-id1 | interface interface-id1 ]
clear |
Reset functions |
ip |
Clear ip counters |
dhcp |
Clear State of DHCP features |
snooping |
Clear State of DHCP Snooping Not available in this release. |
binding |
DHCP snooping bindings |
vlan |
VLAN |
vlan-id |
Type: vlan VLAN id |
vlan |
VLAN |
vlan-id1 |
Type: vlan VLAN id |
mac |
MAC address |
mac-addr |
Type: ethernet MAC address |
ip |
IP address |
ip-addr |
Type: ipaddr IP address |
interface |
interface |
interface-id |
Type: interface interface |
interface |
interface |
interface-id1 |
Type: interface interface |
clear ip dhcp snooping statistics [ vlan vlan-id interface intf | vlan vlan-id ]
clear |
Reset functions |
ip |
Clear ip counters |
dhcp |
Clear State of DHCP features |
snooping |
Clear State of DHCP snooping stats Not available in this release. |
statistics |
DHCP snooping statistics |
vlan |
VLAN |
vlan-id |
Type: vlan VLAN id |
interface |
input interface |
intf |
Type: interface interface |
clear ip dns all config
clear |
Clear entries |
ip |
Configure ip feature |
dns |
DNS related config |
all |
All DNS related content |
config |
Domain-name, name-server, domain-list, sortlist, options, results |
clear ip dns use-vrf config
clear |
Clear entries |
ip |
Configure ip feature |
dns |
DNS related config |
use-vrf |
Config with keyword use-vrf |
config |
Domain-name, name-server, domain-list |
clear ip eigrp [eigrp-ptag] event-history bfd
clear |
Reset functions |
ip |
Clear IP commands |
eigrp |
EIGRP clear commands |
eigrp-ptag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: accounting | all | fsm | graceful-restart | interface | interfaces | internal | neighbor | neighbors | notifications | packets | prefix | route | route-map | shutdown | summary | topology | traffic | transmit | urib | vrf | vrf-events length: 20 Process tag |
event-history |
Clear the event history buffers |
bfd |
Show bfd log of EIGRP |
clear ip eigrp [eigrp-ptag] route-map statistics redistribute { bgp as | { eigrp | isis | ospf | rip } tag | static | direct | amt | lisp } [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ip |
Clear IP commands |
eigrp |
EIGRP clear commands |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
eigrp-ptag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: accounting | all | fsm | graceful-restart | interface | interfaces | internal | neighbor | neighbors | notifications | packets | prefix | route | route-map | shutdown | summary | topology | traffic | transmit | urib | vrf | vrf-events length: 20 Process tag |
route-map |
Route-map related information |
statistics |
Route-map statistics |
redistribute |
Redistribute information from another routing protocol |
bgp |
Border Gateway Protocol (BGP) |
as |
Type: asn Autonomous system number |
isis |
IS-IS Routing for IPv4 |
ospf |
Open Shortest Path First (OSPF) |
rip |
Routing Information Protocol (RIP) |
eigrp |
Enhanced Interior Gateway Routing Protocol (EIGRP) |
tag |
Type: string Process tag |
static |
Static routes |
direct |
Directly connected |
amt |
AMT Anycast prefix |
lisp |
LISP EID-prefixes |
clear ip ftm statistics
clear |
Reset functions |
ip |
Clear IP commands |
ftm |
FTM API |
statistics |
Statistics |
clear ip igmp { groups | route } { all | group-prefix | group [source] } [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ip |
Clear IP commands |
igmp |
Clear IGMP related information |
groups |
Route information |
route |
Route information |
<all> |
Clear all routes |
group-prefix |
Type: ipprefix Clear all routes within the Group prefix |
group |
Type: ipaddr Clear all routes matching the Group |
source |
Type: ipaddr Clear a (S,G) route |
vrf |
Clear information for particular VRF |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
clear ip igmp event-history [igmp-event-hist-buf-name]
clear |
Reset functions |
ip |
Clear IP commands |
igmp |
Clear IGMP related information |
event-history |
Clear event-history buffers |
igmp-event-hist-buf-name |
Type: string Event hist buffer name |
clear ip igmp interface statistics [interface]
clear |
Reset functions |
ip |
Clear IP commands |
igmp |
Clear IGMP statistics information |
interface |
Interface related information |
statistics |
Packet/internal counter statistics |
interface |
Type: interface Specific interface only |
clear ip igmp snooping event-history [igmp-snoop-event-hist-buf-name]
clear |
Reset functions |
ip |
Clear IP commands |
igmp |
Clear IGMP Snooping event hist buffers |
snooping |
Clear IGMP Snooping event hist buffers |
event-history |
Clear event history buffers |
igmp-snoop-event-hist-buf-name |
Type: string Event history buffer name |
clear ip igmp snooping explicit-tracking vlan vlan-id
clear |
Reset functions |
ip |
Clear IP commands |
igmp |
Clear IGMP Snooping information |
snooping |
Clear IGMP Snooping information |
explicit-tracking |
Clear Explicit Host tracking information |
vlan |
Clear explicit tracking information for VLAN/BD |
vlan-id |
Type: vlan Specify VLAN/BD |
clear ip igmp snooping groups { all | { group-prefix | group } [source] } [ interface if-name ] vlan { vlan-id | all }
clear |
Reset functions |
ip |
Clear IP commands |
igmp |
Clear IGMP Snooping |
snooping |
Clear IGMP Snooping |
groups |
Clear snooped groups |
<all> |
Clear all groups |
group-prefix |
Type: ipprefix Group prefix to clear |
group |
Type: ipaddr Group address to clear |
source |
Type: ipaddr Source address to clear |
interface |
Specify interface to clear group state |
if-name |
Type: interface Interface name to clear |
vlan |
Clear information for VLAN/BD |
vlan-id |
Type: vlan Specify the VLAN/BD number |
all |
Clear for all VLAN/BDs |
clear ip igmp snooping proxy querier ports vlan vlan-id if-name [purge]
clear |
Reset functions |
ip |
Clear IP commands |
igmp |
Clear IGMP Snooping |
snooping |
Clear IGMP Snooping |
proxy |
Clear IGMP snooping proxy |
querier |
Clear IGMP snooping proxy querier |
ports |
Clear IGMP snooping proxy querier ports |
vlan |
Clear for a specific vlan |
vlan-id |
Type: vlan Specify the VLAN/BD number |
if-name |
Type: interface Interface name to clear |
purge |
Remove port from priority list |
clear ip igmp snooping { report-policy | access-group } statistics [ vlan vlan ]
clear |
Reset functions |
ip |
Clear IP commands |
igmp |
Clear IGMP Snooping information |
snooping |
Clear IGMP Snooping information |
report-policy |
IGMP Report Policy |
access-group |
IGMP access-group |
statistics |
Policy statistics |
vlan |
Clear VLAN IGMP snooping policy statistics information |
vlan |
Type: vlan Specify VLAN |
clear ip igmp snooping statistics vlan { vlan-id | all }
clear |
Reset functions |
ip |
Clear IP commands |
igmp |
Clear IGMP Snooping statistics information |
snooping |
Clear IGMP Snooping statistics information |
statistics |
Packet/internal counter statistics |
vlan |
Clear VLAN/BD statistics |
all |
All VLAN/BDs |
vlan-id |
Type: vlan Specify VLAN/BD |
clear ip igmp snooping vpc peer-link-exclude vlan { vlan-id | all } [ group group-addr ]
clear |
Reset functions |
ip |
Clear IP commands |
igmp |
Clear IGMP Snooping information |
snooping |
Clear IGMP Snooping information |
vpc |
Clear vPC information |
peer-link-exclude |
Clear vPC peer-link Exclude state |
vlan |
Clear vpc peer-link Exclude state for VLAN/BD |
vlan-id |
Type: vlan Specify VLAN/BD |
all |
All VLAN/BDs |
group |
Clear vpc peer-link Exclude state for VLAN/BD |
group-addr |
Type: ipaddr Specify Group address |
clear ip interface statistics [interface]
clear |
Reset functions |
ip |
Clear IP commands |
interface |
Clear IP related interface information |
statistics |
Clear IP interface statistics |
interface |
Type: interface Clear IP statistics for interface |
clear ip lisp data-cache [eid] [ vrf { vrf-name | vrf-known-name } ]
clear |
Reset functions |
ip |
Clear IP commands |
lisp |
LISP clear commands Not available in this release. |
data-cache |
Clear EID-to-RLOC data cache mapping in this ITR |
eid |
Type: ipaddr Clear mapping for IP destination EID |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
clear ip mfwd event-history [mfwd-event-hist-buf-name]
clear |
Reset functions |
ip |
Clear IP commands |
mfwd |
Clear MCASTFWD related information |
event-history |
Clear event-history buffers |
mfwd-event-hist-buf-name |
Type: string Event hist buffer name |
clear ip mroute { all [ shared-tree | source-tree ] | group-prefix [ shared-tree | source-tree ] | group [ source | shared-tree | source-tree ] } [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ip |
Clear IP commands |
mroute |
Clear multicast routing table |
<all> |
Clear all routes |
group-prefix |
Type: ipprefix Clear all routes within the Group prefix |
group |
Type: ipaddr Clear all routes matching the Group |
source |
Type: ipaddr Clear a (S,G) route |
shared-tree |
Clear the (*,G) route associated with the group |
source-tree |
Clear all (S,G) routes associated with the group |
vrf |
Clear information for particular VRF |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
clear ip mroute statistics { all | group-prefix | group [source] } [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ip |
Clear IP commands |
mroute |
Clear multicast routing table |
statistics |
Clear statistics of multicast route |
<all> |
Clear all routes |
group-prefix |
Type: ipprefix Clear all routes within the Group prefix |
group |
Type: ipaddr Clear all routes matching the Group |
source |
Type: ipaddr Clear a (S,G) route |
vrf |
Clear information for particular VRF |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
clear ip msdp { sa-cache | route } { all | group-prefix | group [source] } [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ip |
Clear IP commands |
msdp |
MSDP clear commands |
sa-cache |
Clear contents of SA cache |
route |
Clear contents of SA cache |
<all> |
Clear all routes |
group-prefix |
Type: ipprefix Clear all routes within the Group prefix |
group |
Type: ipaddr Clear all routes matching the Group |
source |
Type: ipaddr Clear a (S,G) route |
vrf |
Clear information for particular VRF |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
clear ip msdp event-history [msdp-event-hist-buf-name]
clear |
Reset functions |
ip |
Clear IP commands |
msdp |
MSDP global configuration commands |
event-history |
Clear the event-history buffer instances |
msdp-event-hist-buf-name |
Type: string Specify the particular instance of the event-history buffer |
clear ip msdp peer peer-address [ vrf { vrf-name | vrf-known-name } ]
clear |
Reset functions |
ip |
Clear IP commands |
msdp |
MSDP clear commands |
peer |
Clear MSDP peer connection |
peer-address |
Type: ipaddr IP address of MSDP peer |
vrf |
Clear information for particular VRF |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
clear ip msdp policy statistics sa-policy peer-address { in | out } [ vrf { vrf-name | vrf-known-name } ]
clear |
Reset functions |
ip |
Clear IP commands |
msdp |
MSDP global configuration commands |
policy |
Policy information |
statistics |
Policy statistics |
sa-policy |
Configureed SA policy for MSDP peer |
peer-address |
Type: ipaddr IP address of MSDP peer for SA policy |
in |
Input policy |
out |
Output policy |
vrf |
Clear information for particular VRF |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
clear ip msdp statistics [peer-address] [ vrf { vrf-name | vrf-known-name } ]
clear |
Reset functions |
ip |
Clear IP commands |
msdp |
MSDP clear commands |
statistics |
Clear statistics for peers |
peer-address |
Type: ipaddr IP address of MSDP peer |
vrf |
Clear information for particular VRF |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
clear ip ospf [tag] database
clear |
Reset functions |
ip |
Clear IP commands |
ospf |
Clear OSPF tables |
tag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: adjacency | all | border-routers | database | database-timers | events | flooding | graceful-restart | hello | interface | internal | lsa-content-changed-list | lsa-generation | memory | mpls | neighbor | neighbors | packets | policy | redist | request-list | retransmission | retransmission-list | route | spf | spf-trigger | statistics | summary-address | traffic | virtual-links | vrf length: 20 Process tag |
database |
Clear the LSDB and all neighbors |
clear ip ospf [tag] event-history [ adjacency | event | ha | flooding | lsa | spf | redistribution | cli | ldp | te | rib | hello | spf-trigger | all ]
clear |
Reset functions |
ip |
IP events |
ospf |
Debug OSPF events |
tag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: adjacency | all | border-routers | database | database-timers | events | flooding | graceful-restart | hello | interface | internal | lsa-content-changed-list | lsa-generation | memory | mpls | neighbor | neighbors | packets | policy | redist | request-list | retransmission | retransmission-list | route | spf | spf-trigger | statistics | summary-address | traffic | virtual-links | vrf length: 20 Process tag |
event-history |
Clear the event history buffers |
adjacency |
Adjacency formation logs |
event |
Internal event logs |
ha |
HA and GR logs |
flooding |
LSA flooding logs |
lsa |
LSA generation and database logs |
spf |
SPF calculation logs |
redistribution |
Redistribution logs |
cli |
Cli logs |
ldp |
LDP related logs |
te |
MPLS TE related logs |
rib |
RIB related logs |
hello |
HELLO related logs |
spf-trigger |
SPF TRIGGER related logs |
all |
All event history buffers |
clear ip ospf [tag] event-history detail
clear |
Reset functions |
ip |
IP events |
ospf |
Debug OSPF events |
tag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: adjacency | all | border-routers | database | database-timers | events | flooding | graceful-restart | hello | interface | internal | lsa-content-changed-list | lsa-generation | memory | mpls | neighbor | neighbors | packets | policy | redist | request-list | retransmission | retransmission-list | route | spf | spf-trigger | statistics | summary-address | traffic | virtual-links | vrf length: 20 Process tag |
event-history |
Clear the event history buffer |
detail |
Detailed event history buffer |
clear ip ospf [tag] interface { * | interface }
clear |
Reset functions |
ip |
Clear IP commands |
ospf |
Clear OSPF tables |
tag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: adjacency | all | border-routers | database | database-timers | events | flooding | graceful-restart | hello | interface | internal | lsa-content-changed-list | lsa-generation | memory | mpls | neighbor | neighbors | packets | policy | redist | request-list | retransmission | retransmission-list | route | spf | spf-trigger | statistics | summary-address | traffic | virtual-links | vrf length: 20 Process tag |
interface |
Clear one or more interfaces |
* |
Clear all interfaces |
interface |
Type: interface Interface to clear |
clear ip ospf [tag] neighbor { { * | neighborid } [ vrf { vrf-name | vrf-known-name | all } ] | interface }
clear |
Reset functions |
ip |
Clear IP commands |
ospf |
Clear OSPF tables |
tag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: adjacency | all | border-routers | database | database-timers | events | flooding | graceful-restart | hello | interface | internal | lsa-content-changed-list | lsa-generation | memory | mpls | neighbor | neighbors | packets | policy | redist | request-list | retransmission | retransmission-list | route | spf | spf-trigger | statistics | summary-address | traffic | virtual-links | vrf length: 20 Process tag |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
neighbor |
Clear one or more neighbors |
* |
Clear all neighbors |
neighborid |
Type: ipaddr Source IP address, or router ID of the neighbor |
interface |
Type: interface Interface to clear all neighbors on |
clear ip ospf [tag] policy statistics { redistribute { bgp as | { eigrp | isis | ospf | rip } tag | static | direct | amt | lisp } | area area-id-ip filter-list { in | out } } [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ip |
Clear IP commands |
ospf |
Clear OSPF tables |
tag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: adjacency | all | border-routers | database | database-timers | events | flooding | graceful-restart | hello | interface | internal | lsa-content-changed-list | lsa-generation | memory | mpls | neighbor | neighbors | packets | policy | redist | request-list | retransmission | retransmission-list | route | spf | spf-trigger | statistics | summary-address | traffic | virtual-links | vrf length: 20 Process tag |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
policy |
Clear Policy related information |
statistics |
Display Route Filter statistics |
redistribute |
Statistics for redistribution |
isis |
ISO Intermediate-to-Intermediate (IS-IS) |
bgp |
Border Gateway Protocol (BGP) |
as |
Type: asn Autonomous system number |
ospf |
Open Shortest Path First (OSPFv2) |
eigrp |
Enhanced Interior Gateway Protocol (EIGRP) |
rip |
Routing Information Protocol (RIP) |
static |
Static |
direct |
Directly connected |
amt |
AMT anycast prefix |
lisp |
LISP EID-prefixes |
area |
Configure area properties |
area-id-ip |
Type: ipaddr Area Id as an integer or ip address |
filter-list |
Filter prefixes between OSPF areas |
in |
Filter networks sent to this area |
out |
Filter networks sent from this area |
clear ip ospf [tag] redistribution [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ip |
Clear IP commands |
ospf |
Clear OSPF tables |
tag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: adjacency | all | border-routers | database | database-timers | events | flooding | graceful-restart | hello | interface | internal | lsa-content-changed-list | lsa-generation | memory | mpls | neighbor | neighbors | packets | policy | redist | request-list | retransmission | retransmission-list | route | spf | spf-trigger | statistics | summary-address | traffic | virtual-links | vrf length: 20 Process tag |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
redistribution |
Clear OSPF route redistribution |
clear ip ospf [tag] statistics [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ip |
Clear IP commands |
ospf |
Clear OSPF tables |
tag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: adjacency | all | border-routers | database | database-timers | events | flooding | graceful-restart | hello | interface | internal | lsa-content-changed-list | lsa-generation | memory | mpls | neighbor | neighbors | packets | policy | redist | request-list | retransmission | retransmission-list | route | spf | spf-trigger | statistics | summary-address | traffic | virtual-links | vrf length: 20 Process tag |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
statistics |
Clear event counters |
clear ip ospf [tag] traffic [interface] [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ip |
Clear IP commands |
ospf |
Clear OSPF tables |
tag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: adjacency | all | border-routers | database | database-timers | events | flooding | graceful-restart | hello | interface | internal | lsa-content-changed-list | lsa-generation | memory | mpls | neighbor | neighbors | packets | policy | redist | request-list | retransmission | retransmission-list | route | spf | spf-trigger | statistics | summary-address | traffic | virtual-links | vrf length: 20 Process tag |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
traffic |
Clear packet counters |
interface |
Type: interface Interface to clear all traffic on |
clear ip pim event-history [pim-event-hist-buf-name]
clear |
Reset functions |
ip |
Clear IP commands |
pim |
PIM clear commands |
event-history |
Clear event history buffers |
pim-event-hist-buf-name |
Type: string Event history buffer instance |
clear ip pim interface statistics [ interface | vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ip |
Clear IP commands |
pim |
Clear PIM information |
interface |
Interface related information |
statistics |
Packet interface counter statistics |
interface |
Type: interface Interface name to clear |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
clear ip pim policy statistics { register-policy | bsr { bsr-policy | rp-candidate-policy } | auto-rp { rp-candidate-policy | mapping-agent-policy } } [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ip |
Clear IP commands |
pim |
PIM global configuration commands |
policy |
Policy related information |
statistics |
Policy statistics |
register-policy |
Show statistics for register-policy |
bsr |
Bootstrap protocol RP-distribution policy |
bsr-policy |
Statistics for BSR messages |
rp-candidate-policy |
Statistics for RP candidate messages |
auto-rp |
Statistics for auto-rp messages |
rp-candidate-policy |
Statistics for RP candidate messages |
mapping-agent-policy |
Statistics for mapping agent messages |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
clear ip pim policy statistics { jp-policy | neighbor-policy } interface
clear |
Reset functions |
ip |
Clear IP commands |
pim |
PIM global configuration commands |
policy |
Policy related information |
statistics |
Policy statistics |
jp-policy |
Statistics for jp-policy |
neighbor-policy |
Statistics for neighbor-policy |
interface |
Type: interface Interface |
clear ip pim route { all | group-prefix | group [source] } [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ip |
Clear IP commands |
pim |
PIM clear commands |
route |
Route information |
<all> |
Clear all routes |
group-prefix |
Type: ipprefix Clear all routes within the Group prefix |
group |
Type: ipaddr Clear all routes matching the Group |
source |
Type: ipaddr Clear a (S,G) route |
vrf |
Clear information for particular VRF |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
clear ip pim statistics [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ip |
Clear IP commands |
pim |
Clear PIM information |
statistics |
Packet global counter statistics |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
{ clear ip rip policy statistics redistribute bgp as | clear ip rip policy statistics redistribute eigrp tag | clear ip rip policy statistics redistribute isis tag | clear ip rip policy statistics redistribute rip tag | clear ip rip policy statistics redistribute ospf tag | clear ip rip policy statistics redistribute direct | clear ip rip policy statistics redistribute static } [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ip |
Clear IP commands |
rip |
Routing Information Protocol (RIP) |
policy |
Policy related information |
statistics |
Policy statistics |
redistribute |
RIP redistribute routes from other routing protocol |
bgp |
Border Gateway Protocol (BGP) |
eigrp |
Enhanced Interior Gateway Routing Protocol (EIGRP) |
as |
Type: asn Autonomous system number |
isis |
Intermediate-to-intermediate (ISIS) |
ospf |
Open Shortest Path First (OSPFv2) |
tag |
Type: string Process tag |
static |
Static routes |
direct |
Directly connected routes |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
clear ip routing multicast event-history [mrib-event-hist-buf-name]
clear |
Reset functions |
ip |
Clear IP commands |
routing |
Clear event-history buffers |
multicast |
Clear all multicast event-history buffers |
event-history |
Clear event history buffers |
mrib-event-hist-buf-name |
Type: string Event history buffer |
clear ip rsvp authentication [nbr-addr]
clear |
Reset functions |
ip |
Clear IP commands |
rsvp |
Clear RSVP information |
authentication |
Clear security associations |
nbr-addr |
Type: ipaddr RSVP Neighbor address |
clear ip rsvp counters [ teardown | authentication | all ]
clear |
Reset functions |
ip |
Clear IP commands |
rsvp |
Clear RSVP information |
counters |
RSVP counters |
teardown |
Clear signaling tear information |
authentication |
Display RSVP Security Association information |
all |
Clear all information |
clear ip rsvp hello instance counters
clear |
Reset functions |
ip |
Clear IP commands |
rsvp |
Clear RSVP information |
hello |
RSVP Hello configuration commands |
instance |
Clear Hello instance information |
counters |
Clear RSVP statistics |
clear ip rsvp reservation { [ destination dest ] [ source src ] [ ip-protocol proto ] [ dst-port dport ] [ src-port sport ] | all }
clear |
Reset functions |
ip |
Clear IP commands |
rsvp |
Clear RSVP information |
reservation |
Clear RSVP reservation state |
destination |
Clear based on destination address |
dest |
Type: ipaddr Destination address |
source |
Clear based on a source address |
src |
Type: ipaddr Source address |
ip-protocol |
Clear based on IP protocol |
proto |
Type: integer IP protocol value |
dst-port |
Clear based on destination port |
dport |
Type: integer Destination Port value |
src-port |
Clear based on a source port |
sport |
Type: integer Source port value |
<all> |
Clear all state |
clear ip rsvp sender { [ destination dest ] [ source src ] [ ip-protocol proto ] [ dst-port dport ] [ src-port sport ] | all }
clear |
Reset functions |
ip |
Clear IP commands |
rsvp |
Clear RSVP information |
sender |
Clear RSVP sender state |
destination |
Clear based on destination address |
dest |
Type: ipaddr Destination address |
source |
Clear based on a source address |
src |
Type: ipaddr Source address |
ip-protocol |
Clear based on IP protocol |
proto |
Type: integer IP protocol value |
dst-port |
Clear based on destination port |
dport |
Type: integer Destination Port value |
src-port |
Clear based on a source port |
sport |
Type: integer Source port value |
<all> |
Clear all state |
clear ip rsvp signalling [ rate-limit | refresh-reduction ]
clear |
Reset functions |
ip |
Clear IP commands |
rsvp |
Clear RSVP information |
signalling |
Configure RSVP Signalling information |
rate-limit |
Clear rate-limit counters |
refresh-reduction |
Clear refresh-reduction counters |
clear ip stats
clear |
Reset functions |
ip |
Clear IP commands |
stats |
Clear IP internal stats |
clear ip traffic [ vrf { vrf-name | vrf-known-name } ]
clear |
Reset functions |
ip |
Clear IP commands |
traffic |
Clear IP global statistics |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
clear ip vip { uuid uuid | vip-addr vrf { vrf-name | vrf-known-name } }
clear |
Reset functions |
ip |
Clear IP commands |
vip |
Clear virtual ip address |
uuid |
UUID of client |
uuid |
Type: uinteger UUID of client whose vips needs to be cleared |
vip-addr |
Type: ipaddr VIP in format A.B.C.D |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
{ clear ip mbgp [ vrf { vrf-name | vrf-known-name | ALL_VRFS_012345678901234 } ] { neighbor-id | * | asn | prefix-id peer-template peer-template-name } [ soft [ in | out ] | dampened-paths | flap-statistics | no-notify ] | clear ip bgp [ vrf { vrf-name | vrf-known-name | ALL_VRFS_012345678901234 } ] { neighbor-id | * | asn | prefix-id | peer-template peer-template-name } [ soft [ in | out ] | dampened-paths | flap-statistics | no-notify | { ipv4 { unicast | multicast } | { vpnv4 | vpnv6 } unicast | all } { soft [ in | out ] | dampened-paths | flap-statistics | no-notify } ] | clear bgp [ vrf { vrf-name | vrf-known-name | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast } | ipv6 { unicast | multicast } | { vpnv4 | vpnv6 } unicast | l2vpn vpls | all } { neighbor-id | ipv6-neighbor-id | * | asn | peer-template peer-template-name | prefix-id | ipv6-prefix-id } [ soft [ in | out ] | dampened-paths | flap-statistics | no-notify ] } [ vrf { vrf-name | vrf-known-name | ALL_VRFS_012345678901234 } ]
clear |
Reset functions |
ip |
Clear IP commands |
vrf |
Virtual Router Context |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
ALL_VRFS_012345678901234 |
All VRFs |
bgp |
Clear BGP sessions |
mbgp |
Clear MBGP sessions |
neighbor-id |
Type: ipaddr IP address of the neighbor to clear |
ipv6-neighbor-id |
Type: ipv6addr IPv6 address of the neighbor to clear |
prefix-id |
Type: ipprefix Clear all neighbors matching the prefix |
ipv6-prefix-id |
Type: ipv6prefix Clear all neighbors matching the prefix |
* |
Clear all neighbors (Should be a * character) |
asn |
Type: asn Clear all neighbors in an AS |
peer-template |
Clear all neighbors in a peer-template |
peer-template-name |
Type: string length: 80 Peer-template name |
soft |
Soft reconfiguration |
in |
Clear soft reconfiguration inbound |
out |
Clear soft reconfiguration outbound |
ipv4 |
Clear IPv4 address-family |
ipv6 |
Clear IPv6 address-family |
vpnv4 |
Clear VPNv4 address-family Not available in this release. |
vpnv6 |
Clear VPNv6 address-family Not available in this release. |
unicast |
Clear unicast address-family |
multicast |
Clear multicast address-family |
l2vpn |
Display BGP information for L2VPN address family Not available in this release. |
vpls |
Display BGP information for L2VPN VPLS address family |
all |
Clear all address-families |
dampened-paths |
Clear dampened paths for neighbor |
flap-statistics |
Clear flap statistics for neighbor |
no-notify |
Clear without sending notification |
{ clear ip mbgp [ vrf { vrf-name | vrf-known-name | ALL_VRFS_012345678901234 } ] dampening [ ip-prefix | ip-addr [ip-mask] ] | clear ip bgp [ vrf { vrf-name | vrf-known-name | ALL_VRFS_012345678901234 } ] dampening [ ip-prefix | ip-addr [ip-mask] ] | clear ip bgp [ vrf { vrf-name | vrf-known-name | ALL_VRFS_012345678901234 } ] ipv4 { unicast | multicast } dampening [ ip-prefix | ip-addr [ip-mask] ] | clear ip bgp [ vrf { vrf-name | vrf-known-name | ALL_VRFS_012345678901234 } ] all dampening | clear bgp [ vrf { vrf-name | vrf-known-name | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast } | vpnv4 unicast } dampening [ ip-prefix | ip-addr [ip-mask] ] | clear bgp [ vrf { vrf-name | vrf-known-name | ALL_VRFS_012345678901234 } ] { ipv6 { unicast | multicast } | vpnv6 unicast } dampening [ipv6-prefix] | clear bgp [ vrf { vrf-name | vrf-known-name | ALL_VRFS_012345678901234 } ] all dampening } [ vrf { vrf-name | vrf-known-name | ALL_VRFS_012345678901234 } ]
clear |
Reset functions |
ip |
Clear IP commands |
vrf |
Virtual Router Context |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
ALL_VRFS_012345678901234 |
All VRFs |
bgp |
Clear BGP sessions |
mbgp |
Clear MBGP sessions |
dampening |
Clear route flap dampening information |
ip-prefix |
Type: ipprefix Clear route flap dampening for prefix |
ip-addr |
Type: ipaddr Clear route flap dampening for one network |
ip-mask |
Type: ipaddr Network mask |
ipv6-prefix |
Type: ipv6prefix Clear route flap dampening for IPv6 prefix |
ipv4 |
Clear IPv4 address-family |
ipv6 |
Clear IPv6 address-family |
vpnv4 |
Clear VPNv4 address-family Not available in this release. |
vpnv6 |
Clear VPNv6 address-family Not available in this release. |
unicast |
Clear unicast address-family |
multicast |
Clear multicast address-family |
all |
Clear all address-families |
clear ipv6 { icmp | nd } [ interface statistics [interface] | global statistics ]
clear |
Reset functions |
ipv6 |
Clear IPv6 commands |
icmp |
Clear ICMPv6 information |
nd |
Clear Neighbor Discovery interface information |
interface |
Clear ICMPv6 related interface information |
statistics |
Clear ICMPv6 interface statistics |
global |
Clear ICMPv6 global statistics |
interface |
Type: interface Interface to clear statistics for |
clear ipv6 adjacency [ vrf { vrf-name | vrf-known-name } ] { ipv6-addr | * } no-ufdm
clear |
Reset functions |
ipv6 |
Clear IPv6 commands |
adjacency |
Clear Adjacency |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
ipv6-addr |
Type: ipv6addr IPV6 source address |
* |
Delete all adjacency in this context |
no-ufdm |
Create inconsistancy in adjacency |
clear ipv6 adjacency statistics
clear |
Reset functions |
ipv6 |
Clear IPv6 commands |
adjacency |
Clear Adjacency |
statistics |
Clear Adjacency Statistics |
clear ipv6 cache interface [intf]
clear |
Reset functions |
ipv6 |
Configure IPv6 features |
cache |
Clear ipv6 cache |
interface |
Clear ipv6 interface information |
intf |
Type: interface Interface name to clear |
clear ipv6 dhcp relay statistics [ interface intf [ [ server-ip ip-addr-val [ use-vrf vrf-name ] [ interface dest-interface ] ] | [ server-ip ip-addr-val [ interface dest-interface ] [ use-vrf vrf-name ] ] ] ]
clear |
Reset functions |
ipv6 |
IPv6 |
dhcp |
Clear State of DHCPv6 features |
relay |
Clear State of DHCPv6 relay stats |
statistics |
DHCPv6 Relay statistics |
interface |
input interface |
intf |
Type: interface interface |
server-ip |
Server address |
ip-addr-val |
Type: ipv6addr IPv6 relay address |
use-vrf |
Server address VRF membership |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf length: 32 VRF name |
interface |
Destination interface for the server address |
dest-interface |
Type: interface Destination interface |
clear ipv6 eigrp [eigrp-ptag] route-map statistics redistribute { bgp as | { eigrp | isis | ospfv3 | rip } tag | static | direct | amt | lisp } [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ipv6 |
Clear IPv6 commands |
eigrp |
EIGRP clear commands |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
eigrp-ptag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: accounting | all | fsm | graceful-restart | interface | interfaces | internal | neighbor | neighbors | notifications | packets | prefix | route | route-map | shutdown | summary | topology | traffic | transmit | urib | vrf | vrf-events length: 20 Process tag |
route-map |
Route-map related information |
statistics |
Route-map statistics |
redistribute |
Redistribute information from another routing protocol |
bgp |
Border Gateway Protocol (BGP) |
as |
Type: asn Autonomous system number |
isis |
IS-IS Routing for IPv4 |
ospfv3 |
Open Shortest Path First (OSPF) V3 |
rip |
Routing Information Protocol (RIP) |
eigrp |
Enhanced Interior Gateway Routing Protocol (EIGRP) |
tag |
Type: string Process tag |
static |
Static routes |
direct |
Directly connected |
amt |
AMT Anycast prefix |
lisp |
LISP EID-prefixes |
clear ipv6 icmp vpc-statistics
clear |
Reset functions |
ipv6 |
Clear IPv6 commands |
icmp |
Clear ICMPv6 information |
vpc-statistics |
Clear ICMPv6 ND vPC statistics |
clear ipv6 interface statistics [interface]
clear |
Reset functions |
ipv6 |
Clear IPv6 commands |
interface |
Clear IPv6 related interface information |
statistics |
Clear IPv6 interface statistics |
interface |
Type: interface Interface to clear statistics for |
clear ipv6 lisp data-cache [eid6] [ vrf { vrf-name | vrf-known-name } ]
clear |
Reset functions |
ipv6 |
Configure IPv6 features |
lisp |
LISP clear commands Not available in this release. |
data-cache |
Clear EID-to-RLOC data cache mapping in this ITR |
eid6 |
Type: ipaddr Clear mapping for IPv6 destination EID |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
clear ipv6 [icmp] mld { groups | route } { all | group-prefix | group [source] } [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ipv6 |
Clear IPv6 commands |
icmp |
Clear ICMPv6 information |
mld |
Clear Multicast Listener Discovery information |
groups |
Route information |
route |
Route information |
<all> |
Clear all routes |
group-prefix |
Type: ipv6prefix Clear all routes within the Group prefix |
group |
Type: ipv6addr Clear all routes matching the Group |
source |
Type: ipv6addr Clear a (S,G) route |
vrf |
Clear information for particular VRF |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
clear ipv6 mtu [ipv6-addr] [ vrf { vrf-name | vrf-known-name } ]
clear |
Reset functions |
ipv6 |
Display IPV6 information |
mtu |
Display IPV6 Path MTU Cache |
ipv6-addr |
Type: ipv6addr IPv6 address format: aaaa:bbbb:cccc:dddd:eeee:ffff:gggg:hhhh, aaaa::bbbb |
vrf |
Clear information for particular VRF |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
clear ipv6 neighbor [ [ nbr-addr [intf] ] [ vrf { vrf-name | vrf-known-name | all } ] | vrf { vrf-name | vrf-known-name | all } | interface ] [force-delete]
clear |
Reset functions |
ipv6 |
Clear IPv6 commands |
neighbor |
Clear ICMPv6 neighbor cache |
intf |
Type: interface Clear cache entries for given interface |
interface |
Type: interface Clear cache entries for given interface |
nbr-addr |
Type: ipv6addr IPv6 address format: aaaa:bbbb:cccc:dddd:eeee:ffff:gggg:hhhh, aaaa::bbbb |
force-delete |
Clear the cache entries without refresh |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
clear ipv6 netstack mroute { all | group-prefix | group [source] } [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ipv6 |
Clear IPv6 commands |
netstack |
Netstack's local cache |
mroute |
Multicast route information |
<all> |
Clear all routes |
group-prefix |
Type: ipv6prefix Clear all routes within the Group prefix |
group |
Type: ipv6addr Clear all sources matching the Group |
source |
Type: ipv6addr Clear a (S,G) route |
vrf |
Clear information for particular VRF |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
clear ipv6 pim event-history [pim6-event-hist-buf-name]
clear |
Reset functions |
ipv6 |
Clear IPv6 commands |
pim |
Clear PIM event history buffers |
event-history |
Clear event-history buffers |
pim6-event-hist-buf-name |
Type: string Event-history buffer instance |
clear ipv6 pim interface statistics [interface]
clear |
Reset functions |
ipv6 |
Clear IPv6 commands |
pim |
Clear PIM6 information |
interface |
Interface related information |
statistics |
Packet interface counter statistics |
interface |
Type: interface Interface name to clear |
clear ipv6 pim policy statistics { jp-policy | neighbor-policy } interface
clear |
Reset functions |
ipv6 |
Clear IPv6 commands |
pim |
Clear PIM information |
policy |
Policy related information |
statistics |
Policy statistics |
jp-policy |
Statistics for jp-policy |
neighbor-policy |
Statistics for neighbor-policy |
interface |
Type: interface Interface |
clear ipv6 pim route { all | group-prefix | group [source] } [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ipv6 |
Clear IPv6 commands |
pim |
PIM6 clear commands |
route |
Route information |
<all> |
Clear all routes |
group-prefix |
Type: ipv6prefix Clear all routes within the Group prefix |
group |
Type: ipv6addr Clear all routes matching the Group |
source |
Type: ipv6addr Clear a (S,G) route |
vrf |
Clear information for particular VRF |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
clear ipv6 pim statistics [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ipv6 |
Clear IPv6 commands |
pim |
Clear PIM6 information |
statistics |
Packet global counter statistics |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
{ clear ipv6 rip policy statistics redistribute bgp as | clear ipv6 rip policy statistics redistribute eigrp tag | clear ipv6 rip policy statistics redistribute isis tag | clear ipv6 rip policy statistics redistribute rip tag | clear ipv6 rip policy statistics redistribute ospfv3 tag | clear ipv6 rip policy statistics redistribute direct | clear ipv6 rip policy statistics redistribute static } [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ipv6 |
Clear IPv6 commands |
rip |
Routing Information Protocol (RIP) |
policy |
Policy related information |
statistics |
Policy statistics |
redistribute |
RIP redistribute routes from other routing protocol |
bgp |
Border Gateway Protocol (BGP) |
as |
Type: asn Autonomous system number |
eigrp |
Enhanced Interior Gateway Routing Protocol (EIGRP) |
isis |
Intermediate-to-intermediate (ISIS) |
ospfv3 |
Open Shortest Path First (OSPFv3) |
tag |
Type: string Process tag |
static |
Static routes |
direct |
Directly connected routes |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
clear ipv6 statistics
clear |
Reset functions |
ipv6 |
Clear IPv6 commands |
statistics |
Clear IPv6 global statistics |
clear ipv6 traffic [ vrf { vrf-name | vrf-known-name } ]
clear |
Reset functions |
ipv6 |
Clear IPv6 commands |
traffic |
Clear IPv6 traffic statistics |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
clear isis [isis-tag] [ vrf { vrf-name | vrf-known-name | all } ] adjacency { * | { interface | system-id sid } | + } [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
isis |
Clear IS-IS information |
isis-tag |
Type: string pattern: [a-zA-Z0-9_][-a-zA-Z0-9_]* length: 20 Routing process tag |
vrf |
Display per-VRF information |
vrf-name |
Type: string pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
adjacency |
Clear IS-IS adjacency state |
* |
IS-IS adjacencies on all interfaces |
interface |
Type: interface IS-IS interface |
system-id |
Hostname or System ID |
sid |
Type: sid Hostname or System ID (in the form of XXXX.XXXX.XXXX) |
clear isis [isis-tag] [ vrf { vrf-name | vrf-known-name | all } ] dpi [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
isis |
Clear IS-IS information |
isis-tag |
Type: string pattern: [a-zA-Z0-9_][-a-zA-Z0-9_]* length: 20 Routing process tag |
vrf |
Display per-VRF information |
vrf-name |
Type: string pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
dpi |
Clear IS-IS DPI logs |
clear isis [isis-tag] event-history [isis-event-hist-buf-name]
clear |
Reset functions |
isis |
Clear IS-IS information |
isis-tag |
Type: string pattern: [a-zA-Z0-9_][-a-zA-Z0-9_]* length: 20 Routing process tag |
event-history |
Clear event history buffers |
isis-event-hist-buf-name |
Type: string Clear the specific event history buffer |
clear isis [isis-tag] [ vrf { vrf-name | vrf-known-name | all } ] ipv6 route-map statistics { redistribute { bgp as | { src-isis | eigrp | ospfv3 | rip } tag } | redistribute { static | direct | amt | lisp } | distribute src-level into dst-level } [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
isis |
Clear IS-IS information |
isis-tag |
Type: string pattern: [a-zA-Z0-9_][-a-zA-Z0-9_]* length: 20 Routing process tag |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
ipv6 |
Clear IS-IS IPv6 information |
statistics |
Clear IS-IS route-map statistics |
redistribute |
Redistribute information from another routing protocol |
bgp |
Border Gateway Protocol (BGP) |
eigrp |
Enhanced Interior Gateway Protocol |
as |
Type: integer min: 1 max: 65535 Autonomous system number |
<src-isis> |
IS-IS Routing for IPv6 |
ospfv3 |
Open Shortest Path First (OSPF) V3 |
rip |
RIP for IPv6 (RIPNG) |
tag |
Type: string Process tag |
static |
Static routes |
direct |
Directly connected |
amt |
AMT anycast prefix |
lisp |
LISP EID-prefixes |
route-map |
Route-map to constrain redistribution |
distribute |
Distribute routes between ISIS levels |
into |
from level-n into level-m |
src-level |
Route-distribution between levels
|
dst-level |
Route-distribution between levels
|
clear isis [isis-tag] redistribution [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
isis |
Clear IS-IS information |
isis-tag |
Type: string pattern: [a-zA-Z0-9_][-a-zA-Z0-9_]* length: 20 Routing process tag |
vrf |
Display per-VRF information |
vrf-name |
Type: string pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
redistribution |
Clear IS-IS redistributed information |
clear isis [isis-tag] [ vrf { vrf-name | vrf-known-name | all } ] [ip] route-map statistics { redistribute { bgp as | { src-isis | eigrp | ospf | rip } tag } | redistribute { static | direct | amt | lisp } | distribute src-level into dst-level } [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
isis |
Clear IS-IS information |
isis-tag |
Type: string pattern: [a-zA-Z0-9_][-a-zA-Z0-9_]* length: 20 Routing process tag |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
ip |
Clear IS-IS IPv4 information |
route-map |
Clear IS-IS route-map information |
statistics |
Clear IS-IS route-map statistics |
redistribute |
Redistribute information from another routing protocol |
bgp |
Border Gateway Protocol (BGP) |
eigrp |
Enhanced Interior Gateway Protocol |
as |
Type: integer min: 1 max: 65535 Autonomous system number |
<src-isis> |
IS-IS Routing for IPv4 |
ospf |
Open Shortest Path First (OSPF) |
rip |
RIP for IPv4 |
tag |
Type: string Process tag |
static |
Static routes |
direct |
Directly connected |
amt |
AMT anycast prefix |
lisp |
LISP EID-prefixes |
distribute |
Distribute routes between ISIS levels |
into |
from level-n into level-m |
src-level |
Route-distribution between levels
|
dst-level |
Route-distribution between levels
|
clear isis [isis-tag] [ vrf { vrf-name | vrf-known-name | all } ] spf-log [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
isis |
Clear IS-IS information |
isis-tag |
Type: string pattern: [a-zA-Z0-9_][-a-zA-Z0-9_]* length: 20 Routing process tag |
vrf |
Display per-VRF information |
vrf-name |
Type: string pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
spf-log |
Display IS-IS SPF information |
clear isis [isis-tag] [ vrf { vrf-name | vrf-known-name | all } ] statistics { * | interface } [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
isis |
Clear IS-IS information |
isis-tag |
Type: string pattern: [a-zA-Z0-9_][-a-zA-Z0-9_]* length: 20 Routing process tag |
vrf |
Display per-VRF information |
vrf-name |
Type: string pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
statistics |
Clear IS-IS protocol statistics |
* |
All IS-IS protocol statistics |
interface |
Type: interface IS-IS interface |
clear isis [isis-tag] [ vrf { vrf-name | vrf-known-name | all } ] traffic { * | interface } [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
isis |
Clear IS-IS information |
isis-tag |
Type: string pattern: [a-zA-Z0-9_][-a-zA-Z0-9_]* length: 20 Routing process tag |
vrf |
Display per-VRF information |
vrf-name |
Type: string pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
traffic |
Clear IS-IS traffic information |
* |
All IS-IS traffic information |
interface |
Type: interface IS-IS interface |
clear l2dbg { macdb | portdb }
clear |
Clear |
l2dbg |
L2 debug databases |
macdb |
L2 debug MACDB |
portdb |
L2 debug PORTDB |
clear l2protocol tunnel counters [ interface intf-range ]
clear |
Reset functions |
l2protocol |
Clear l2protocol counters |
tunnel |
Protocol Tunneling |
counters |
l2pt packet counters |
interface |
Interface or range of interfaces |
intf-range |
Type: interface-mrange Interface or range of interfaces |
clear l3vm event-history { pss | errors | mts | reinit | cli | vrf | topology | all }
clear |
Reset functions |
l3vm |
Debug L3VM information |
event-history |
log debug events into event history buffer |
pss |
L3VM pss operation |
errors |
L3VM errors |
mts |
L3VM MTS messages |
reinit |
L3VM reinit events |
cli |
Log L3VM CLI related events |
vrf |
Log VRF related events |
topology |
Log Topology related events |
all |
All L3VM debugging |
clear lacp counters [ interface if0 ]
clear |
Reset functions |
lacp |
LACP protocol |
counters |
LACP counters |
interface |
Specify a port-channel |
if0 |
Type: interface-mrange |
clear ldap-server statistics host0 [ __readonly__ server_state [ clock_time monitoring_statistics time_in_pstate ndead tt_in_dstate ] auth_statistics auth_failed_transactions auth_succ_transactions auth_req_sent auth_req_timedout auth_resp_no_match auth_resp_not_processed auth_resp_error acct_statistics acct_failed_transactions acct_succ_transactions acct_req_sent acct_req_timedout acct_resp_no_match acct_resp_not_processed acct_resp_error ]
clear |
Reset functions |
ldap-server |
Clear LDAP related parameters |
statistics |
Clear LDAP statistics |
host0 |
Type: string DNS name or IP address |
__readonly__ | |
server_state |
Show state of server
|
clock_time |
Type: string Show clock time in terms of hours, minutes and seconds |
monitoring_statistics |
Monitoring Statistics |
time_in_pstate |
Type: string Time in previous state |
ndead |
Type: uinteger Number of times dead |
tt_in_dstate |
Type: string Total time in dead state |
auth_statistics |
Authentication Statistics |
acct_statistics |
Accounting Statistics |
auth_failed_transactions |
Type: uinteger Authentication: Failed transactions |
auth_succ_transactions |
Type: uinteger Authentication: Successful transactions |
auth_req_sent |
Type: uinteger Authentication: Requests sent |
auth_req_timedout |
Type: uinteger Authentication: Requests timedout |
auth_resp_no_match |
Type: uinteger Authentication: Responses with no matching requests |
auth_resp_not_processed |
Type: uinteger Authentication: Responses not processed |
auth_resp_error |
Type: uinteger Authentication: Responses containing errors |
acct_failed_transactions |
Type: uinteger Accounting: Failed transactions |
acct_succ_transactions |
Type: uinteger Accounting: Successful transactions |
acct_req_sent |
Type: uinteger Accounting: Requests sent |
acct_req_timedout |
Type: uinteger Accounting: Requests timedout |
acct_resp_no_match |
Type: uinteger Accounting: Responses with no matching requests |
acct_resp_not_processed |
Type: uinteger Accounting: Responses not processed |
acct_resp_error |
Type: uinteger Accounting: Responses containing errors |
clear license { license-file [force] | sprom | s0 }
clear |
Reset functions |
license |
clear license |
license-file |
Type: string length: 30 License file to be uninstalled |
force |
Force license clear (don't prompt) |
sprom |
clear license contents in sprom |
s0 |
Type: string antipattern: all | nvram | setting | sprom License file to be uninstalled |
clear line s0
clear |
Reset functions |
line |
Kill a session on particular vty |
s0 |
Type: string length: 64 Enter the vty name |
clear lldp counters
clear |
Reset functions |
lldp |
Reset the lldp counters |
counters |
Reset the lldp traffic counters to zero |
clear lldp counters interface if0
clear |
Reset functions |
lldp |
Reset the lldp counters |
counters |
Reset the lldp traffic counters to zero |
interface |
Clear lldp traffic counters per interface |
if0 |
Type: interface Enter interface |
clear logging ip access-list cache
clear |
Reset functions |
logging |
Clear logging information |
ip |
IP configuration |
access-list |
Access-list |
cache |
logging |
clear logging logfile
clear |
Reset functions |
logging |
Clear logging information |
logfile |
Clear logfile messages |
clear logging nvram
clear |
Reset functions |
logging |
Clear logging information |
nvram |
Clear nvram logs |
clear logging onboard [ card-boot-history | card-first-power-on | environmental-history | error-stats | exception-log | interrupt-stats | module module [ environmental-history | error-stats | exception-log | interrupt-stats | obfl-logs | stack-trace | card-boot-history | card-first-power-on ] | obfl-logs | stack-trace ]
clear |
Reset functions |
logging |
Clear logging information |
onboard |
Clear OBFL information |
environmental-history |
Clear OBFL environmental history |
error-stats |
Clear OBFL error statistics |
exception-log |
Clear OBFL exception log |
interrupt-stats |
Clear OBFL interrupt statistics |
card-boot-history |
Clear Card Boot History |
card-first-power-on |
Clear Card First Power On |
module |
Clear OBFL information for Module |
module |
Type: integer Enter module number |
obfl-logs |
Clear OBFL (boot-uptime/device-version/obfl-history). |
stack-trace |
Clear OBFL stack trace |
clear mac address-table dynamic [ address mac-addr | interface interface-name ] [ multicast-entries [not-notified] ] [ vlan vlan-id ] [ instance instance ] [ __readonly__ info_str ]
clear |
Clear |
mac |
MAC configuration commands |
address-table |
MAC Address Table |
dynamic |
clear dynamic entries from the Layer2 Forwarding Table |
address |
address |
mac-addr |
Type: ethernet MAC Address |
interface |
Interface |
interface-name |
Type: interface Interface name |
vlan |
VLAN |
vlan-id |
Type: vlan VLAN ID |
instance |
Eureka Instance |
instance |
Type: integer min: 1 max: 2 ASIC Instance Number |
multicast-entries |
clear all dynamically learnt multicast entries |
not-notified |
entries that exceed the hardware notification limit |
__readonly__ | |
info_str |
Type: string Information |
clear mac address-table dynamic interface interface-name peer-ip peer_ipv4 [ vlan vlan-id ]
clear |
Clear |
mac |
MAC configuration commands |
address-table |
MAC Address Table |
dynamic |
clear dynamic entries from the Layer2 Forwarding Table |
interface |
Interface |
interface-name |
Type: interface Interface name |
peer-ip |
peer ip |
peer_ipv4 |
Type: ipaddr peer ip |
vlan |
VLAN |
vlan-id |
Type: vlan VLAN ID |
clear mpls switching label statistics
clear |
Reset functions |
mpls |
MPLS clear commands |
switching |
Clear MPLS label switching database information |
label |
Clear MPLS label information |
statistics |
Clear label statistics |
clear ntp session
clear |
Reset functions |
ntp |
Network Time Protocol |
session |
Clear the ntp configuration session |
clear ntp statistics { all-peers | io | local | memory }
clear |
Reset functions |
ntp |
Network Time Protocol |
statistics |
Clear NTP Statistics |
all-peers |
Clear per-peer statistics counter of all peers |
io |
Clear input-output statistics |
local |
Clear counters maintained by the local NTP |
memory |
Clear statistics counters related to memory code |
clear nvram
clear |
Reset functions |
nvram |
purge NVRAM |
clear onep error
clear |
Reset functions |
onep |
One Platform |
error |
Clear the ONE-P error buffer |
clear onep history { archived | all | session { all | onep-session-id } }
clear |
Reset functions |
onep |
One Platform |
history |
One Platform history trails |
archived |
One Platform archived session |
session |
One Platform session |
all |
All sessions |
onep-session-id |
Type: string Specific session name |
clear onep session rate-limit
clear |
Reset functions |
onep |
One Platform |
session |
One Platform session |
rate-limit |
rate limiting feature info |
clear onep statistics [ session { all | onep-session-id } ]
clear |
Reset functions |
onep |
One Platform |
statistics |
statistics |
session |
One Platform session |
all |
All sessions |
onep-session-id |
Type: string Specific session name |
clear onep trace
clear |
Reset functions |
onep |
One Platform |
trace |
Clear the ONE-P trace buffer |
clear ospfv3 [tag] [ vrf { vrf-name | vrf-known-name | all } ] database [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ospfv3 |
Clear OSPF tables |
tag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: adjacency | all | border-routers | database | database-timers | events | flooding | graceful-restart | hello | interface | internal | lsa-content-changed-list | lsa-generation | memory | mpls | neighbor | neighbors | packets | policy | redist | request-list | retransmission | retransmission-list | route | spf | spf-trigger | statistics | summary-address | traffic | virtual-links | vrf length: 20 Process tag |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
database |
Clear the LSDB and all neighbors |
clear ospfv3 [tag] event-history [ adjacency | event | ha | flooding | lsa | spf | redistribution | cli | hello | spf-trigger | all ]
clear |
Reset functions |
ospfv3 |
Debugging functions |
tag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: adjacency | all | border-routers | database | database-timers | events | flooding | graceful-restart | hello | interface | internal | lsa-content-changed-list | lsa-generation | memory | mpls | neighbor | neighbors | packets | policy | redist | request-list | retransmission | retransmission-list | route | spf | spf-trigger | statistics | summary-address | traffic | virtual-links | vrf length: 20 Process tag |
event-history |
Clear the event history buffers |
adjacency |
Adjacency formation logs |
event |
Internal event logs |
ha |
HA and GR logs |
flooding |
LSA flooding logs |
lsa |
LSA generation and databse logs |
spf |
SPF calculation logs |
redistribution |
Redistribution logs |
cli |
Cli logs |
hello |
HELLO related logs |
spf-trigger |
SPF TRIGGER related logs |
all |
All event history buffers |
clear ospfv3 [tag] event-history detail
clear |
Reset functions |
ospfv3 |
Debugging functions |
tag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: adjacency | all | border-routers | database | database-timers | events | flooding | graceful-restart | hello | interface | internal | lsa-content-changed-list | lsa-generation | memory | mpls | neighbor | neighbors | packets | policy | redist | request-list | retransmission | retransmission-list | route | spf | spf-trigger | statistics | summary-address | traffic | virtual-links | vrf length: 20 Process tag |
event-history |
Clear the event history buffer |
detail |
Detailed event history buffer |
clear ospfv3 [tag] [ vrf { vrf-name | vrf-known-name | all } ] interface { * | interface } [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ospfv3 |
Clear OSPF tables |
tag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: adjacency | all | border-routers | database | database-timers | events | flooding | graceful-restart | hello | interface | internal | lsa-content-changed-list | lsa-generation | memory | mpls | neighbor | neighbors | packets | policy | redist | request-list | retransmission | retransmission-list | route | spf | spf-trigger | statistics | summary-address | traffic | virtual-links | vrf length: 20 Process tag |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
interface |
Clear one or more interfaces |
* |
Clear all interfaces |
interface |
Type: interface Interface to clear |
clear ospfv3 [tag] [ vrf { vrf-name | vrf-known-name | all } ] neighbor { * | neighborid | interface } [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ospfv3 |
Clear OSPF tables |
tag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: adjacency | all | border-routers | database | database-timers | events | flooding | graceful-restart | hello | interface | internal | lsa-content-changed-list | lsa-generation | memory | mpls | neighbor | neighbors | packets | policy | redist | request-list | retransmission | retransmission-list | route | spf | spf-trigger | statistics | summary-address | traffic | virtual-links | vrf length: 20 Process tag |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
neighbor |
Clear one or more neighbors |
* |
Clear all neighbors |
neighborid |
Type: ipaddr Source IP address, or router ID of the neighbor |
interface |
Type: interface Interface to clear all neighbors on |
clear ospfv3 [tag] [ vrf { vrf-name | vrf-known-name | all } ] policy statistics { redistribute { bgp as | { eigrp | isis | rip } tag | static | direct | amt | lisp } | area area-id-ip filter-list { in | out } } [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ospfv3 |
Display OSPFv3 status and configuration |
tag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: adjacency | all | border-routers | database | database-timers | events | flooding | graceful-restart | hello | interface | internal | lsa-content-changed-list | lsa-generation | memory | mpls | neighbor | neighbors | packets | policy | redist | request-list | retransmission | retransmission-list | route | spf | spf-trigger | statistics | summary-address | traffic | virtual-links | vrf length: 20 Process tag |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
policy |
Clear Policy related information |
statistics |
Display Route Filter statistics |
redistribute |
Statistics for redistribution |
eigrp |
Enhanced Interior Gateway Protocol (EIGRP) |
rip |
Routing Information Protocol (RIP) |
isis |
ISO Intermediate-to-Intermediate (IS-IS) |
bgp |
Border Gateway Protocol (BGP) |
as |
Type: asn Autonomous system number |
static |
Static |
direct |
Directly connected |
amt |
AMT anycast prefix |
lisp |
LISP EID-prefixes |
area |
Configure area properties |
area-id-ip |
Type: ipaddr Area Id as an integer or ip address |
filter-list |
Filter prefixes between OSPF areas |
in |
Filter networks sent to this area |
out |
Filter networks sent from this area |
clear ospfv3 [tag] redistribution [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ospfv3 |
Clear OSPF tables |
tag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: adjacency | all | border-routers | database | database-timers | events | flooding | graceful-restart | hello | interface | internal | lsa-content-changed-list | lsa-generation | memory | mpls | neighbor | neighbors | packets | policy | redist | request-list | retransmission | retransmission-list | route | spf | spf-trigger | statistics | summary-address | traffic | virtual-links | vrf length: 20 Process tag |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
redistribution |
Clear OSPFv3 route redistribution |
clear ospfv3 [tag] [ vrf { vrf-name | vrf-known-name | all } ] statistics [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ospfv3 |
Clear OSPF tables |
tag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: adjacency | all | border-routers | database | database-timers | events | flooding | graceful-restart | hello | interface | internal | lsa-content-changed-list | lsa-generation | memory | mpls | neighbor | neighbors | packets | policy | redist | request-list | retransmission | retransmission-list | route | spf | spf-trigger | statistics | summary-address | traffic | virtual-links | vrf length: 20 Process tag |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
statistics |
Clear statistics counters |
clear ospfv3 [tag] [ vrf { vrf-name | vrf-known-name | all } ] traffic [interface] [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ospfv3 |
Clear OSPF tables |
tag |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* antipattern: adjacency | all | border-routers | database | database-timers | events | flooding | graceful-restart | hello | interface | internal | lsa-content-changed-list | lsa-generation | memory | mpls | neighbor | neighbors | packets | policy | redist | request-list | retransmission | retransmission-list | route | spf | spf-trigger | statistics | summary-address | traffic | virtual-links | vrf length: 20 Process tag |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
traffic |
Clear traffic counters |
interface |
Type: interface Interface to clear all traffic on |
clear otv route [ vlan-id | mac-address ]
clear |
Reset functions |
otv |
Clear OTV commands |
route |
OTV route or MAC address table |
vlan-id |
Type: vlan Vlan-ID |
mac-address |
Type: ethernet MAC Address |
clear pktmgr cache { interface [intf] | vlan [vl] }
clear |
Reset functions |
pktmgr |
Clear Packet Manager information |
cache |
Clear pktmgr cache |
interface |
Clear pktmgr related interface information |
vlan |
Clear pktmgr related vlan information |
intf |
Type: interface Interface name to clear |
vl |
Type: uinteger min: 1 max: 4096 default: 1 Vlan |
clear pktmgr client [uuid]
clear |
Reset functions |
pktmgr |
Clear Packet Manager information |
client |
Clear pktmgr clients counters |
uuid |
Type: uinteger Clear pktmgr client counters for given uuid |
clear pktmgr interface [interface]
clear |
Reset functions |
pktmgr |
Clear Packet Manager information |
interface |
Clear pktmgr related interface information |
interface |
Type: interface Interface name to display |
clear port-security dynamic address mac-address vlan vlanid
clear |
Reset functions |
port-security |
Clear port-security information |
dynamic |
dynamic addresses |
address |
secure address |
mac-address |
Type: ethernet 48 bit mac address |
vlan |
vlan information |
vlanid |
Type: uinteger min: 1 max: 4094 vlan id. Enter a value between 1 and 4094 |
clear port-security dynamic interface if_index [ vlan vlanid ]
clear |
Reset functions |
port-security |
Clear port-security information |
dynamic |
dynamic addresses |
interface |
interface |
if_index |
Type: interface ethernet |
vlan |
vlan information |
vlanid |
Type: uinteger min: 1 max: 4094 vlan id. Enter a value between 1 and 4094 |
clear port-security nvram
clear |
Reset functions |
port-security |
Clear port-security information |
nvram |
port-security nvram |
clear processes log all
clear |
Reset functions |
processes |
process-related clear commands |
log |
Delete log files |
all |
Delete all the log files |
clear processes log all vdc-all
clear |
Reset functions |
processes |
process-related clear commands |
log |
Delete log files |
all |
Delete all the log files |
vdc-all |
Delete all the log files in all vdcs |
clear processes log archive [ file s0 ]
clear |
Reset functions |
processes |
system manager spawned processes |
log |
Delete log files |
archive |
clear all process logs for this vdc from logflash on this module |
file |
delete a log file on logflash |
s0 |
Type: string Name of file in directory 'log' |
clear processes log pid i0
clear |
Reset functions |
processes |
process-related clear commands |
log |
Delete log files |
pid |
Delete log file of a specific process |
i0 |
Type: integer min: 1 max: 2147483647 pid of the process |
clear processes vdc e-vdc2 log all
clear |
Reset functions |
processes |
process-related clear commands |
vdc |
process-related clear commands in vdc |
e-vdc2 |
Type: userdef Enter Virtual Device Context <vdc-id> |
log |
Delete log files |
all |
Delete all the log files |
clear processes vdc e-vdc2 log pid i1
clear |
Reset functions |
processes |
process-related clear commands |
vdc |
process-related clear commands in vdc |
e-vdc2 |
Type: userdef Enter Virtual Device Context <vdc-id> |
log |
Delete log files |
pid |
Delete log file of a specific process |
i1 |
Type: integer min: 1 max: 2147483647 pid of the process |
clear qos mpls-snmp
clear |
Reset functions |
qos |
QoS Global Commands |
mpls-snmp |
MPLS default table-map & snmp indices in pss Not available in this release. |
clear qos policies
clear |
Reset functions |
qos |
Clear qos information |
policies |
Clear default policies Not available in this release. |
clear qos policies force
clear |
Reset functions |
qos |
Clear qos information |
policies |
Clear default policies |
force |
Clear forcefully |
clear qos statistics [ { interface [iface-list] | vlan [vlan-list] } [ input | output ] [ type qos-or-q ] ]
clear |
Reset functions |
qos |
Clear policy information |
statistics |
Clear statistics |
interface |
Clear statistics on a interface |
iface-list |
Type: interface-mrange List of Interfaces |
vlan |
802.1Q vlan |
vlan-list |
Type: integer-mrange List of vlan ids |
input |
Input Service policy |
output |
Output Service policy |
type |
Policy type |
qos-or-q |
|
clear radius-server statistics host0 [ __readonly__ server_state [ clock_time monitoring_statistics time_in_pstate ndead tt_in_dstate ] auth_statistics auth_failed_transactions auth_succ_transactions auth_req_sent auth_req_timedout auth_resp_no_match auth_resp_not_processed auth_resp_error acct_statistics acct_failed_transactions acct_succ_transactions acct_req_sent acct_req_timedout acct_resp_no_match acct_resp_not_processed acct_resp_error ]
clear |
Reset functions |
radius-server |
Clear RADIUS related parameters |
statistics |
Clear RADIUS statistics |
host0 |
Type: string DNS name or IP address |
__readonly__ | |
server_state |
Show state of server
|
clock_time |
Type: string Show clock time in terms of hours, minutes and seconds |
monitoring_statistics |
Monitoring Statistics |
time_in_pstate |
Type: string Time in previous state |
ndead |
Type: uinteger Number of times dead |
tt_in_dstate |
Type: string Total time in dead state |
auth_statistics |
Authentication Statistics |
acct_statistics |
Accounting Statistics |
auth_failed_transactions |
Type: uinteger Authentication: Failed transactions |
auth_succ_transactions |
Type: uinteger Authentication: Successful transactions |
auth_req_sent |
Type: uinteger Authentication: Requests sent |
auth_req_timedout |
Type: uinteger Authentication: Requests timedout |
auth_resp_no_match |
Type: uinteger Authentication: Responses with no matching requests |
auth_resp_not_processed |
Type: uinteger Authentication: Responses not processed |
auth_resp_error |
Type: uinteger Authentication: Responses containing errors |
acct_failed_transactions |
Type: uinteger Accounting: Failed transactions |
acct_succ_transactions |
Type: uinteger Accounting: Successful transactions |
acct_req_sent |
Type: uinteger Accounting: Requests sent |
acct_req_timedout |
Type: uinteger Accounting: Requests timedout |
acct_resp_no_match |
Type: uinteger Accounting: Responses with no matching requests |
acct_resp_not_processed |
Type: uinteger Accounting: Responses not processed |
acct_resp_error |
Type: uinteger Accounting: Responses containing errors |
clear radius session
clear |
Reset functions |
radius |
clear to be commited RADIUS config and lock in fabric |
session |
clear to be commited RADIUS config and lock in fabric |
clear { ipv6 | ip } rip statistics [ * | interface ] [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
ipv6 |
Clear IPv6 commands |
ip |
Clear IP commands |
rip |
Routing Information Protocol (RIP) |
statistics |
Clear RIP statistics |
* |
RIP statistics for all interfaces |
interface |
Type: interface RIP interface |
vrf |
Display per-VRF information |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
clear rmon { alarms | events | logs | hcalarms | all-alarms }
clear |
Reset functions |
rmon |
Clear RMON tables |
alarms |
Clear all 32 bit alarms |
events |
Clear rmon log; this also clears rmon event table |
logs |
Clear rmon log |
hcalarms |
Clear all 64 bit rmon alarms |
all-alarms |
Clear all 32 bit and 64 bit rmon alarms |
clear route-map { route-map-name | route-map-cfg-name } pbr-statistics
clear |
Reset functions |
route-map |
Route-map used for PBR |
route-map-name |
Type: string pattern: [!-~]* length: 63 Route-map name |
route-map-cfg-name |
Type: string Known route-map name |
pbr-statistics |
Statistics for policy based routing |
clear routing [ ip | ipv4 ] [unicast] event-history { urib-event-hist | urib-event-hist-hid }
clear |
Reset functions |
routing |
Clear routing information |
ip |
Clear IP commands |
ipv4 |
Clear IP commands |
unicast |
Clear unicast information |
event-history |
Clear routing event log |
urib-event-hist |
Type: string Clear routing event log |
urib-event-hist-hid |
Type: string Clear routing event log |
clear routing ipv6 [unicast] event-history { u6rib-event-hist | u6rib-event-hist-hid }
clear |
Reset functions |
routing |
Clear routing information |
ipv6 |
Clear IPv6 commands |
unicast |
Clear unicast information |
event-history |
Clear routing event log |
u6rib-event-hist |
Type: string Clear routing event log |
u6rib-event-hist-hid |
Type: string Clear routing event log |
clear routing [ ip | ipv4 ] [unicast] memstats
clear |
Reset functions |
routing |
Clear routing information |
ip |
Clear IP commands |
ipv4 |
Clear IP commands |
unicast |
Display unicast information |
memstats |
Clear urib memory statistics |
clear routing [ ip | ipv4 ] multicast { all | group-prefix | group [source] } [ vrf { vrf-name | vrf-known-name | all } ]
clear |
Reset functions |
routing |
Clear routing information |
ip |
Clear IP commands |
ipv4 |
Clear IP commands |
multicast |
Clear multicast routing table |
<all> |
Clear all routes |
group-prefix |
Type: ipprefix Clear all routes within the Group prefix |
group |
Type: ipaddr Clear all routes matching Group |
source |
Type: ipaddr Clear a (S,G) route |
vrf |
Clear information for particular VRF |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
all |
Display information for all VRFs |
clear rpm pss { running | startup | all }
clear |
Reset functions |
rpm |
Route Policy Manager (RPM) |
pss |
Clear PSS related information |
running |
Clear the running PSS commands configuration |
startup |
Clear the startup PSS commands configuration |
all |
Clear all PSS commands configurarion |
clear scheduler logfile
clear |
Reset functions |
scheduler |
Scheduler clear commands |
logfile |
Clear scheduler log file |
clear screen
clear |
Reset functions |
screen |
Clear screen |
clear session state name s4
clear |
Reset functions |
session |
Reset confg session internals |
state |
Reset confg session internal state |
name |
Reset confg session internal state for a given name |
s4 |
Type: string length: 64 Enter the name of the session |
clear snmp counters
clear |
Reset functions |
snmp |
Clear SNMP Tables |
counters |
Clear SNMP counters |
clear snmp hostconfig
clear |
Reset functions |
snmp |
Clear SNMP Tables |
hostconfig |
Clear SNMP Host List |
clear sockets statistics { all | tcp | tcp6 | udp | udp6 | raw | raw6 }
clear |
Reset functions |
sockets |
Clear sockets statistics |
statistics |
Clear sockets statistics |
all |
Clear TCP/UDP/RAW v4/v6 statistics |
tcp |
Clear TCP v4 statistics |
tcp6 |
Clear TCP v6 statistics |
udp |
Clear UDP v4 statistics |
udp6 |
Clear UDP v6 statistics |
raw |
Clear RAW v4 statistics |
raw6 |
Clear RAW v6 statistics |
clear spanning-tree counters [ interface interface-id | vlan vlan-id ]
clear |
Reset functions |
spanning-tree |
Spanning Tree Subsystem |
counters |
Clear spanning tree statistics |
interface |
Specify an interface as a target for the command |
interface-id |
Type: interface Specify an interface as a target for the command |
vlan |
VLAN Switch Spanning Trees |
vlan-id |
Type: vlan-mrange vlan range, Example: 1,3-5,7,9-11 |
clear spanning-tree detected-protocols [ interface interface-id ]
clear |
Reset functions |
spanning-tree |
Spanning Tree Subsystem |
detected-protocols |
Restart the protocol migration process |
interface |
Specify an interface as a target for the command |
interface-id |
Type: interface Specify an interface as a target for the command |
clear spanning-tree sps-hist
clear |
Reset functions |
spanning-tree |
Spanning Tree Subsystem |
sps-hist |
Set port state stats |
clear ssh hosts
clear |
Reset functions |
ssh |
Clear ssh values |
hosts |
Clear the list of trusted ssh hosts |
clear system reset-reason
clear |
Reset functions |
system |
Clear logs in system |
reset-reason |
Clear reset-reason logs in the system |
clear system reset-reason history
clear |
Reset functions |
system |
Clear logs in system |
reset-reason |
Clear reset-reason logs in the system |
history |
Clear reset-reason history logs in the system |
clear tacacs-server statistics host0 [ __readonly__ server_state [ clock_time monitoring_statistics time_in_pstate ndead tt_in_dstate ] auth_statistics auth_failed_transactions auth_succ_transactions auth_req_sent auth_req_timedout auth_resp_no_match auth_resp_not_processed auth_resp_error autho_statistics autho_failed_transactions autho_succ_transactions autho_req_sent autho_req_timedout autho_resp_no_match autho_resp_not_processed autho_resp_error acct_statistics acct_failed_transactions acct_succ_transactions acct_req_sent acct_req_timedout acct_resp_no_match acct_resp_not_processed acct_resp_error ]
clear |
Reset functions |
tacacs-server |
Clear TACACS related parameters |
statistics |
Clear TACACS statistics |
host0 |
Type: string DNS name or IP address |
__readonly__ | |
server_state |
Show state of server
|
clock_time |
Type: string Show clock time in terms of hours, minutes and seconds |
monitoring_statistics |
Monitoring Statistics |
time_in_pstate |
Type: string Time in previous state |
ndead |
Type: uinteger Number of times dead |
tt_in_dstate |
Type: string Total time in dead state |
auth_statistics |
Authentication Statistics |
autho_statistics |
Authorization Statistics |
acct_statistics |
Accounting Statistics |
auth_failed_transactions |
Type: uinteger Authentication: Failed transactions |
auth_succ_transactions |
Type: uinteger Authentication: Successful transactions |
auth_req_sent |
Type: uinteger Authentication: Requests sent |
auth_req_timedout |
Type: uinteger Authentication: Requests timedout |
auth_resp_no_match |
Type: uinteger Authentication: Responses with no matching requests |
auth_resp_not_processed |
Type: uinteger Authentication: Responses not processed |
auth_resp_error |
Type: uinteger Authentication: Responses containing errors |
autho_failed_transactions |
Type: uinteger Authorization: Failed transactions |
autho_succ_transactions |
Type: uinteger Authorization: Successful transactions |
autho_req_sent |
Type: uinteger Authorization: Requests sent |
autho_req_timedout |
Type: uinteger Authorization: Requests timedout |
autho_resp_no_match |
Type: uinteger Authorization: Responses with no matching requests |
autho_resp_not_processed |
Type: uinteger Authorization: Responses not processed |
autho_resp_error |
Type: uinteger Authorization: Responses containing errors |
acct_failed_transactions |
Type: uinteger Accounting: Failed transactions |
acct_succ_transactions |
Type: uinteger Accounting: Successful transactions |
acct_req_sent |
Type: uinteger Accounting: Requests sent |
acct_req_timedout |
Type: uinteger Accounting: Requests timedout |
acct_resp_no_match |
Type: uinteger Accounting: Responses with no matching requests |
acct_resp_not_processed |
Type: uinteger Accounting: Responses not processed |
acct_resp_error |
Type: uinteger Accounting: Responses containing errors |
clear tech-support lock
clear |
Reset functions |
tech-support |
Gather information for troubleshooting |
lock |
Clear the lock which prohibits multiple show techs to run in parallel |
clear tech-support lock
clear |
Reset functions |
tech-support |
Gather information for troubleshooting |
lock |
Clear the lock which prohibits multiple show techs to run in parallel |
clear user s0
clear |
Reset functions |
user |
Logout a particular user |
s0 |
Type: string length: 28 Enter the username |
clear veobc counters
clear |
Reset function |
veobc |
Reset the veobc counters |
counters |
Reset the veobc statistic counters to zero |
clear vlan access-list counters [name]
clear |
Reset functions |
vlan |
Vlan commands |
access-list |
Clear access list statistical information |
counters |
Clear access list counters |
name |
Type: string length: 64 List name |
clear vlan [ id vlan-id ] counters
clear |
Reset functions |
vlan |
Vlan commands |
id |
clear VLAN counters by VLAN id |
vlan-id |
Type: vlan-mrange VLAN ID 1-3967 or range(s): 1-5, 10 or 2-5,7-19 |
counters |
display counters |
clear vpc statistics { vpc vpc_num | peer-link }
clear |
Reset functions |
vpc |
Statistics for a specific vPC |
statistics |
Statistics |
vpc_num |
Type: integer min: 1 max: 4096 Virtual Port Channel number |
peer-link |
stats for peer-link |
clear vpc statistics all
clear |
Reset functions |
vpc |
Virtual Port Channel configuration |
statistics |
Statistics |
all |
All vPC statistics |
clear vpc statistics peer-keepalive
clear |
Reset functions |
vpc |
Virtual Port Channel configuration |
statistics |
Statistics |
peer-keepalive |
peer keepalive module related statistics |
clear vpc transport statistics [ __readonly__ last-clear-time ]
clear |
Reset functions |
vpc |
Virtual Port Channel configuration |
transport |
cfs transport |
statistics |
Statistics |
__readonly__ |
Read Only |
last-clear-time |
Type: string time difference from last clear time |
{ clear ip mbgp [ vrf { vrf-name | vrf-known-name | ALL_VRFS_012345678901234 } ] flap-statistics [ ip-prefix | ip-addr [ip-mask] ] | clear ip bgp [ vrf { vrf-name | vrf-known-name | ALL_VRFS_012345678901234 } ] flap-statistics [ ip-prefix | ip-addr [ip-mask] ] | clear ip bgp [ vrf { vrf-name | vrf-known-name | ALL_VRFS_012345678901234 } ] ipv4 { unicast | multicast } flap-statistics [ ip-prefix | ip-addr [ip-mask] ] | clear ip bgp [ vrf { vrf-name | vrf-known-name | ALL_VRFS_012345678901234 } ] all flap-statistics | clear bgp [ vrf { vrf-name | vrf-known-name | ALL_VRFS_012345678901234 } ] { ipv4 { unicast | multicast } | vpnv4 unicast } flap-statistics [ ip-prefix | ip-addr [ip-mask] | regexp regexp-str ] | clear bgp [ vrf { vrf-name | vrf-known-name | ALL_VRFS_012345678901234 } ] { ipv6 { unicast | multicast } | vpnv6 unicast } flap-statistics [ ipv6-prefix | regexp regexp-str ] | clear bgp [ vrf { vrf-name | vrf-known-name | ALL_VRFS_012345678901234 } ] all flap-statistics } [ vrf { vrf-name | vrf-known-name | ALL_VRFS_012345678901234 } ]
clear |
Reset functions |
vrf |
Virtual Router Context |
vrf-name |
Type: vrf pattern: [-a-zA-Z0-9_:;$#@]* antipattern: vrf | detail | interface | definition | context | forwarding | member | all | l2-vrf | topology | passive length: 32 VRF name |
vrf-known-name |
Type: vrf Known VRF name |
ALL_VRFS_012345678901234 |
All VRFs |
ip |
Clear IP commands |
bgp |
Clear BGP sessions |
mbgp |
Clear MBGP sessions |
flap-statistics |
Clear flap statistics |
ip-prefix |
Type: ipprefix Clear flap statistics for one prefix |
ipv6-prefix |
Type: ipv6prefix Clear flap statistics for one IPv6 prefix |
ip-addr |
Type: ipaddr Clear flap statistics for one network |
ip-mask |
Type: ipaddr Network mask |
ipv4 |
Clear IPv4 address-family |
ipv6 |
Clear IPv6 address-family |
vpnv4 |
Clear VPNv4 address-family Not available in this release. |
vpnv6 |
Clear VPNv6 address-family Not available in this release. |
unicast |
Clear unicast address-family |
multicast |
Clear multicast address-family |
all |
Clear all address-families |
regexp |
Clear flap statistics for routes matching the regular expression |
regexp-str |
Type: string Regular expression to match the AS paths |
clear vrrp statistics [ interface intf_num ] [ vr vr_id ]
clear |
Reset functions |
vrrp |
Clear virtual router |
statistics |
Clear global virtual router statistics |
interface |
Select interface |
intf_num |
Type: interface |
vr |
[1-255] clear virtual router statistics |
vr_id |
Type: integer min: 1 max: 255 |
clear vtp counters
clear |
Reset functions |
vtp |
Clear VTP items |
counters |
Clear VTP counters |
clear xl
clear |
Reset functions |
xl |
cli alias name s0 line | no cli alias name s0 [line]
no |
Negate a command or set its defaults |
cli |
Configure CLI commands |
alias |
Define an alias |
name |
Specify the alias |
s0 |
Type: string length: 30 Alias command |
line |
Type: remainder Alias definition |
cli no var name s0
cli |
CLI commands |
no |
Negate a command or set its defaults |
var |
Unset a variable |
name |
Specify a variable name |
s0 |
Type: string length: 31 Variable name |
cli reload parsetree
cli show running-config local
cli var name s0 line
cli |
CLI commands |
var |
Define a variable |
name |
Specify a variable name |
s0 |
Type: string length: 31 Variable name |
line |
Type: remainder Variable value |
cli var name s0 line | no cli var name s0 [line]
no |
Negate a command or set its defaults |
cli |
Configure CLI commands |
var |
Define a variable |
name |
Specify a variable name |
s0 |
Type: string length: 31 Variable name |
line |
Type: remainder Variable value |
[no] cli verifynrun
no |
Negate a command or set its defaults |
cli |
CLI commands |
verifynrun |
Verify and run |
[no] client-to-client reflection
no |
Negate a command or set its defaults |
client-to-client |
Configure client-to-client route reflection |
reflection |
reflection of routes permitted |
[no] clock format { 12-hours | 24-hours }
no |
Negate a command or set its defaults |
clock |
Clock |
format |
Display format of clock |
12-hours |
12 hours display |
24-hours |
24 hours display |
[no] clock format show-timezone syslog
no |
Negate a command or set its defaults |
clock |
Clock |
format |
Display format of clock |
show-timezone |
Display the configured timezone |
syslog |
Display the configured timezone in syslogs |
[no] clock protocol { ntp | none } vdc vdc-id
no |
Negate a command or set its defaults |
clock |
Clock |
protocol |
protocol |
ntp |
ntp |
none |
none (clock can be set manually) |
vdc |
vdc |
vdc-id |
Type: integer vdc-id |
clock set s0 i0 { April i1 | August i2 | December i3 | February i4 | January i5 | July i6 | June i7 | March i8 | May i9 | November i10 | October i11 | September i12 }
clock |
Clock |
set |
HH:MM:SS Current Time |
s0 |
Type: string length: 8 HH:MM:SS Current Time |
i0 |
Type: integer-range Day of the month |
April |
Month of the year |
i1 |
Type: integer-range Enter the year (no abbreviation) |
August |
Month of the year |
i2 |
Type: integer-range Enter the year (no abbreviation) |
December |
Month of the year |
i3 |
Type: integer-range Enter the year (no abbreviation) |
February |
Month of the year |
i4 |
Type: integer-range Enter the year (no abbreviation) |
January |
Month of the year |
i5 |
Type: integer-range enter the year (no abbreviation) |
July |
Month of the year |
i6 |
Type: integer-range Enter the year (no abbreviation) |
June |
Month of the year |
i7 |
Type: integer-range Enter the year (no abbreviation) |
March |
Month of the year |
i8 |
Type: integer-range Enter the year (no abbreviation) |
May |
Month of the year |
i9 |
Type: integer-range Enter the year (no abbreviation) |
November |
Month of the year |
i10 |
Type: integer-range Enter the year (no abbreviation) |
October |
Month of the year |
i11 |
Type: integer-range Enter the year (no abbreviation) |
September |
Month of the year |
i12 |
Type: integer-range Enter the year (no abbreviation) |
clock { summer-time s0 [ i0 s1 s2 s3 i1 s4 s5 s6 [i2] ] | timezone s7 i3 i4 } | no clock { summer-time [ s0 i0 s1 s2 s3 i1 s4 s5 s6 i2 ] | timezone [ s7 i3 i4 ] }
no |
Negate a command or set its defaults |
clock |
Clock |
summer-time |
Configure summer (daylight savings) time |
s0 |
Type: string length: 8 Name of time zone in summer, such as PDT, CDT, EDT, etc.. |
i0 |
Type: integer min: 1 max: 5 Week number to start (first week=1, last week=5) |
s1 |
Type: string length: 9 Weekday to start |
s2 |
Type: string length: 9 Month to start |
s3 |
Type: string length: 5 HH:MM Time to start |
i1 |
Type: integer min: 1 max: 5 Week number to end (first week=1, last week=5) |
s4 |
Type: string length: 9 Weekday to end |
s5 |
Type: string length: 9 Month to end |
s6 |
Type: string length: 5 HH:MM Time to end |
i2 |
Type: integer min: 1 max: 120 Offset to add in minutes |
timezone |
Configure time zone |
s7 |
Type: string length: 8 Name of time zone, such as PST, MST, CST, EST, etc.. |
i3 |
Type: integer min: 12 max: 14 Hours offset from UTC |
i4 |
Type: integer min: 0 max: 59 Minutes offset from UTC |
[no] clock sync-interval intv
no |
Negate a command or set its defaults |
clock |
Clock |
sync-interval |
sync-interval in seconds |
intv |
Type: uinteger min: 15 max: 90 interval |
[no] cluster-id { ip-cluster-id | int-cluster-id }
no |
Negate a command or set its defaults |
cluster-id |
Configure Route Reflector Cluster-ID |
ip-cluster-id |
Type: ipaddr Cluster-id as an IP address |
int-cluster-id |
Type: uinteger min: 1 max: 4294967295 Cluster-id as a 32 bit quantity |
commit
commit |
Commit the current configuration session |
commit verbose
commit |
Commit the current configuration session |
verbose |
Commit the current configuration session with more details |
[no] compress-bitfields ipv6 multicast
no |
Negate a command or set its defaults |
compress-bitfields |
Compress bitfields for improved memory utilization |
ipv6 |
Use for IPv6 multicast |
multicast |
Use compressed bitfields for M6RIB and PIM6 |
[no] compress-bitfields [ipv4] multicast
no |
Negate a command or set its defaults |
compress-bitfields |
Compress bitfield for improved memory utilization |
ipv4 |
Use for IPv4 multicast |
multicast |
Use compressed bitfields for MRIB and PIM |
[no] confederation identifier confed-id
no |
Negate a command or set its defaults |
confederation |
AS confederation parameters |
identifier |
Set routing domain confederation AS |
confed-id |
Type: asn AS number |
[no] confederation peers confed-id
no |
Negate a command or set its defaults |
confederation |
AS confederation parameters |
peers |
Peer ASs in BGP confederation |
confed-id |
Type: asn AS number |
configure [terminal]
configure |
Enter configuration mode |
terminal |
Configure the system from terminal input |
configure session s0
configure |
Enter configuration mode |
session |
Configure the system in a session |
s0 |
Type: string pattern: [a-zA-Z0-9_][a-zA-Z0-9_-]* length: 64 Enter the name of the session |
[no] congestion-control ecn
no |
Negate a command or set its defaults |
congestion-control |
Congestion Control Protocol Not available in this release. |
ecn |
Enable ECN protocol |
[no] congestion-control random-detect { [ threshold { burst-optimized | mesh-optimized } ] | minimum-threshold min-thresh [ packets | bytes | kbytes | mbytes ] maximum-threshold max-thresh [ packets1 | bytes1 | kbytes1 | mbytes1 ] drop-probability drop-prob }
no |
Negate a command or set its defaults |
congestion-control |
Congestion Control Protocol Not available in this release. |
random-detect |
Enable WRED protocol Not available in this release. |
threshold |
Threshold |
minimum-threshold |
Minimum Threshold |
min-thresh |
Type: long Minimum Threshold Value |
maximum-threshold |
Maximum Threshold |
max-thresh |
Type: long Minimum Threshold Value |
burst-optimized |
Threshold optimized for bursty traffic |
mesh-optimized |
Threshold optimized for mesh traffic |
drop-probability |
Drop Probability at Maximum Threshold |
drop-prob |
Type: integer min: 1 max: 100 Drop Probability Value |
packets |
Packets |
bytes |
Bytes |
kbytes |
Kilo Bytes |
mbytes |
Mega Bytes |
packets1 |
Packets |
bytes1 |
Bytes |
kbytes1 |
Kilo Bytes |
mbytes1 |
Mega Bytes |
[no] congestion-control tail-drop [ threshold { burst-optimized | mesh-optimized } ]
no |
Negate a command or set its defaults |
congestion-control |
Congestion Control Protocol Not available in this release. |
tail-drop |
Enable Tail-Drop Not available in this release. |
threshold |
Threshold |
burst-optimized |
Threshold optimized for bursty traffic |
mesh-optimized |
Threshold optimized for mesh traffic |
continue seq | no continue [seq]
no |
Negate a command or set its defaults |
continue |
Continue on a different entry within the route-map |
seq |
Type: integer min: 0 max: 65535 Route-map entry sequence number |
contract-id s0 | no contract-id
no |
Negate a command or set its defaults |
contract-id |
Service contract id of the customer |
s0 |
Type: string length: 255 Provide contract number (as specified in the service agreement) |
control-plane
control-plane |
Enter to control-plane sub-mode |
copp copy profile profile_type { prefix | suffix } user_string
copp |
Control-Plane Policing |
copy |
Make a copy of the CoPP Profile |
profile |
CoPP Profile |
profile_type |
CoPP Profile Types
|
prefix |
prefix for the copied policy |
suffix |
suffix for the copied policy |
user_string |
Type: string pattern: [a-zA-Z0-9_-][a-zA-Z0-9_-]* length: 20 Enter prefix/suffix for the copied policy |
[no] copp distributed-policing enable
no |
Negate a command or set its defaults |
copp |
Control-Plane Policing |
distributed-policing |
distributed policer Not available in this release. |
enable |
enable distributed policing |
copp profile profile_type
copp |
Control-Plane Policing |
profile |
CoPP Profile |
profile_type |
CoPP Profile Types
|
copy { src_local { dest_local | running-config [echo-commands] [stop-at-first-failure] | startup-config | scheduled-config } | src_core dest_local_core | running-config-src { startup-config [fabric] | dest_local_config } | startup-config-src { running-config [echo-commands] [stop-at-first-failure] | dest_local_config } }
copy |
Copy from one file to another |
src_local |
Type: uri Select source filesystem |
src_core |
Type: uri Select source filesystem |
dest_local |
Type: uri Select destination filesystem |
dest_local_core |
Type: uri Select destination filesystem |
dest_local_config |
Type: uri Select destination filesystem |
running-config |
Copy from source to running configuration |
running-config-src |
Copy running configuration to destination |
startup-config |
Copy from source to startup configuration |
startup-config-src |
Copy startup configuration to destination |
scheduled-config |
Schedule configuration at the specified source to be applied at next switch reload |
echo-commands |
Echo the commands before applying them (to correlate errors) |
stop-at-first-failure |
Stop at first error |
fabric |
Copy from source to fabric startup configuration |
copy { src_local dest_remote [ vrf vrf-known-name ] | src_remote { dest_local | running-config [echo-commands] [stop-at-first-failure] | startup-config } [ vrf vrf-known-name ] | src_core dest_remote [ vrf vrf-known-name ] | running-config-src dest_remote [ vrf vrf-known-name ] | startup-config-src dest_remote [ vrf vrf-known-name ] }
copy |
Copy from one file to another |
src_local |
Type: uri Select source filesystem |
src_core |
Type: uri Select source filesystem |
dest_local |
Type: uri Select destination filesystem |
dest_remote |
Type: uri Select destination filesystem |
src_remote |
Type: uri Select source filesystem |
vrf |
Display per-VRF information |
vrf-known-name |
Type: vrf Known VRF name |
running-config |
Copy from source to running configuration |
running-config-src |
Copy running configuration to destination |
startup-config |
Copy from source to startup configuration |
startup-config-src |
Copy startup configuration to destination |
echo-commands |
Echo the commands before applying them (to correlate errors) |
stop-at-first-failure |
Stop at first error |
copy licenses uri0
copy |
Copy from one file to another |
licenses |
Backup license files |
uri0 |
Type: uri Specify URL (with .tar extension) for backing up license files |
copy { running-config-src { startup-config | dest_local_config } | startup-config-src { running-config | dest_local_config } } vdc-all
copy |
Copy from one file to another |
dest_local_config |
Type: uri Select destination filesystem |
running-config-src |
Copy running configuration to destination |
startup-config |
Copy from source to startup configuration |
running-config |
Copy from source to running configuration |
startup-config-src |
Copy startup configuration to destination |
vdc-all |
Perform copy for all vdcs |
copy { running-config-src dest_remote [ vrf vrf-known-name ] | startup-config-src dest_remote [ vrf vrf-known-name ] } vdc-all
copy |
Copy from one file to another |
dest_remote |
Type: uri Select destination filesystem |
vrf |
Display per-VRF information |
vrf-known-name |
Type: vrf Known VRF name |
running-config-src |
Copy running configuration to destination |
startup-config-src |
Copy startup configuration to destination |
vdc-all |
Perform copy for all vdcs |
[no] core-on-no-memory
no |
Negate a command or set its defaults |
core-on-no-memory |
Generate core dump on memory allocation failure |
[no] core-on-no-memory
no |
Negate a command or set its defaults |
core-on-no-memory |
Generate core dump on memory allocation failure |
cost cost | no cost [cost]
no |
Negate a command or set its defaults |
cost |
Cost associated with interface |
cost |
Type: integer min: 1 max: 65535 Cost value |
" | " count
| |
Pipe command output to filter |
count |
Count number of lines |
counter name counter-name value counter-value op op-val
counter |
Specify the name of the counter |
name |
Specify the name of the counter |
counter-name |
Type: string Name of the counter |
value |
Specify the value to be applied to the counter |
counter-value |
Type: integer Enter the value |
op |
Specify the operator to be applied |
op-val |
Enter the value of the operator
|
cpu threshold rising risingth falling fallingth interval seconds
cpu |
CPU resource |
threshold |
Threshold settings |
rising |
Rising threshold setting |
risingth |
Type: uinteger min: 1 max: 100 Rising threshold in percentage |
falling |
Falling threshold setting |
fallingth |
Type: uinteger min: 1 max: 100 Falling threshold in percentage |
interval |
Observation interval setting |
seconds |
Type: uinteger min: 5 max: 300 Observation interval in seconds |
[no] crypto ca authenticate s0
no |
Negate a command or set its defaults |
crypto |
Set crypto settings |
ca |
Configure certificate authority related information |
authenticate |
Authenticate the certificate authority certificate |
s0 |
Type: string length: 64 trustpoint label |
[no] crypto ca crl request s0 uri0
no |
Negate a command or set its defaults |
crypto |
Set crypto settings |
ca |
Configure certificate authority related information |
crl |
import certificate revocation list |
request |
import certificate revocation list |
s0 |
Type: string length: 64 trustpoint label |
uri0 |
Type: uri Specify source file name |
[no] crypto ca enroll s0
no |
Negate a command or set its defaults |
crypto |
Set crypto settings |
ca |
Configure certificate authority related information |
enroll |
Create certificate request |
s0 |
Type: string length: 64 trustpoint label |
[no] crypto ca export s0 pkcs12 uri0 s1
no |
Negate a command or set its defaults |
crypto |
Set crypto settings |
ca |
Configure certificate authority related information |
export |
export rsa private key and certificates in pkcs#12 |
s0 |
Type: string length: 64 trustpoint label |
pkcs12 |
destination file url |
uri0 |
Type: uri Specify destination file name |
s1 |
Type: string length: 128 passphrase to encrypt the private key |
[no] crypto ca import s0 certificate
no |
Negate a command or set its defaults |
crypto |
Set crypto settings |
ca |
Configure certificate authority related information |
import |
import the certificate or key |
s0 |
Type: string length: 64 trustpoint label |
certificate |
import the certificate |
crypto ca import s0 pkcs12 uri0 s1
crypto |
Set crypto settings |
ca |
Configure certificate authority related information |
import |
import the certificate or key |
s0 |
Type: string length: 64 trustpoint label |
pkcs12 |
source file url |
uri0 |
Type: uri source file url |
s1 |
Type: string length: 128 passphrase to decrypt the private key |
[no] crypto ca lookup { remote | local | both }
no |
Negate a command or set its defaults |
crypto |
Set crypto settings |
ca |
Configure certificate authority related information |
lookup |
Choose the certstore for authentication |
remote |
Use remote certstore |
local |
Use local certstore |
both |
Use both local and remote certstore |
[no] crypto ca remote ldap { server-group s0 | [ crl-refresh-time i0 ] }
no |
Negate a command or set its defaults |
crypto |
Set crypto settings |
ca |
Configure certificate authority related information |
remote |
Use ca from remote certstore |
ldap |
Ldap certstore |
crl-refresh-time |
Configure refresh-time to fetch crl from remote certstore |
i0 |
Type: integer min: 0 max: 744 Refresh time value in hours. A value of 0 will now run the refresh routine once. |
server-group |
Ldap server group |
s0 |
Type: string length: 64 Ldap server group name |
[no] crypto ca trustpoint s0
no |
Negate a command or set its defaults |
crypto |
Set crypto settings |
ca |
Configure certificate authority related information |
trustpoint |
Configure trustpoint certificate authority |
s0 |
Type: string length: 64 trustpoint label |
[no] crypto cert ssh-authorize [ s0 map s1 [s2] | default map s3 ]
no |
Negate a command or set its defaults |
crypto |
Configure crypto settings |
cert |
Configure certificate maping filter settings |
ssh-authorize |
Configure mapping filter for ssh |
s0 |
Type: string length: 64 Issuer name of the certificate |
map |
Mapping filter to be applied |
s1 |
Type: string length: 64 Name of the mapping filter which is already configured |
s2 |
Type: string length: 64 Name of the mapping filter which is already configured |
default |
Default map for ssh authorization |
s3 |
Type: string length: 64 Name of the default mapping filter which is already configured |
[no] crypto certificatemap mapname s0
no |
Negate a command or set its defaults |
crypto |
Set crypto settings |
certificatemap |
Configure certificatemap filters |
mapname |
Create a new filter map |
s0 |
Type: string length: 64 Name of the filter map |
[no] crypto key generate rsa [ [exportable] [ modulus i0 ] | [ label s0 ] [ [exportable] [ modulus1 i1 ] ] | modulus2 i2 ]
no |
Negate a command or set its defaults |
crypto |
Set crypto settings |
key |
Configure key pair related information |
generate |
Configure key pair generation related information |
rsa |
Configure rsa key pair generation related information |
exportable |
key-pair is exportable |
modulus |
key-pair size |
i0 |
Type: integer min: 512 max: 2048 key-pair size |
label |
key-pair label |
s0 |
Type: string length: 64 key-pair label |
exportable |
key-pair is exportable |
modulus1 |
key-pair size |
i1 |
Type: integer min: 512 max: 2048 key-pair size |
modulus2 |
key-pair size |
i2 |
Type: integer min: 512 max: 2048 key-pair size |
[no] crypto key param rsa label s0 modulus i0 [exportable]
no |
Negate a command or set its defaults |
crypto |
Set crypto settings |
key |
Configure key pair related information |
param |
Configure key pair related information |
rsa |
Configure rsa key pair related information |
label |
key-pair label |
s0 |
Type: string length: 64 key-pair label |
modulus |
key-pair size |
i0 |
Type: integer min: 512 max: 2048 key-pair size |
exportable |
key-pair is exportable |
[no] crypto key zeroize rsa s0
no |
Negate a command or set its defaults |
crypto |
Set crypto settings |
key |
Configure key pair related information |
zeroize |
Delete key-pair |
rsa |
Delete rsa key-pair |
s0 |
Type: string length: 64 key-pair label |
[no] cts enable
no |
Negate a command or set its defaults |
cts |
Config commands for CTS Not available in this release. |
enable |
Enable/Disable CTS |
customer-id s0 | no customer-id
no |
Negate a command or set its defaults |
customer-id |
customer id |
s0 |
Type: remainder Provide customer id (as specified in the service agreement) |
" | " cut { -b bytes | -c chars | -f fields | -d delim | -s | --help } +
| |
Pipe command output to filter |
cut |
Print selected parts of lines. |
-b |
output only these bytes |
-c |
output only these characters |
-d |
specify other field delimiter (default is TAB). |
-f |
output only these fields; also print any line that contains no delimiter character, unless the -s option is specified |
-s |
do not print lines not containing delimiters |
bytes |
Type: string {n|n-|n-m|-m} N-th byte, N to end of line, N to M, start of line to N |
chars |
Type: string {n|n-|n-m|-m} N-th char, N to end of line, N to M, start of line to N |
fields |
Type: string {n|n-|n-m|-m} N-th field, N to end of line, N to M, start of line to N |
delim |
Type: string field separator char, TAB is default, use ' ' for space |
--help |
print help of underlying unix command |