New and Changed Information
This table summarizes the new and changed features for the Cisco Nexus 9000 Series NX-OS High Availability and Redundancy Guide, Release 6.x and tells you where they are documented.
Feature |
Description |
Changed in Release |
Where Documented |
---|---|---|---|
Cisco Nexus 9332PQ, 9372PX, 9372TX, and 9396TX chassis |
Introduced these devices. |
6.1(2)I3(1) |
|
Supervisor B |
Introduced this module. |
6.1(2)I3(1) |
|
Line cards |
Added the ability to keep line cards powered down whenever they fail or crash. |
6.1(2)I3(1) |
|
Cisco Nexus 9516 chassis |
Introduced this device. |
6.1(2)I2(2a) |
|
X9464PX, X9464TX, X9432PQ, and X9536PQ |
Introduced these line cards. |
6.1(2)I2(2a) |
|
Operating modes for fabric modules |
Added the ability to configure the system fabric in full-rate mode (FRM) or oversubscribed mode (OSM). |
6.1(2)I2(2a) |
|
Cisco Nexus 9504, 9396PX, and 93128TX chassis |
Introduced these devices. |
6.1(2)I2(1) |
|
X9564PX and X9564TX |
Introduced these line cards. |
6.1(2)I2(1) |
|
HSRP |
Introduced this feature. |
6.1(2)I2(1) |
|
Spanning Tree Protocol |
Introduced this feature. |
6.1(2)I2(1) |
|
vPCs |
Added support for virtual port channels. |
6.1(2)I2(1) |
|
VRRP |
Introduced this feature. |
6.1(2)I2(1) |
|
Cisco Nexus 9508 chassis |
Introduced this device. |
6.1(2)I1(1) |
|
X9636PQ |
Introduced this line card. |
6.1(2)I1(1) |