D Commands

dampen-igp-metric

dampen-igp-metric <sec> | no dampen-igp-metric

Syntax Description

Syntax Description

no

Negate a command or set its defaults

dampen-igp-metric

Dampen IGP metric-related changes

sec

Time interval in seconds
Command Mode
  • /exec/configure/router-bgp/router-bgp-af

dampening

[no] dampening [ { <half-life> <reuse-limit> <suppress-limit> <max-suppress-time> } | { route-map <rmap-name> } ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

dampening

Configure route flap dampening

half-life

(Optional) Decay half life

reuse-limit

(Optional) Value to start reusing a route

suppress-limit

(Optional) Value to start suppressing a route

max-suppress-time

(Optional) Maximum suppress time for stable route

route-map

(Optional) Apply route-map to specify dampening criteria

rmap-name

(Optional) Route-map name
Command Mode
  • /exec/configure/router-bgp/router-bgp-af /exec/configure/router-bgp/router-bgp-af-vpnv4 /exec/configure/router-bgp/router-bgp-af-vpnv6 /exec/configure/router-bgp/router-bgp-af-link-state /exec/configure/router-bgp/router-bgp-af-l2vpn-evpn

dampening

[no] dampening [ { <half-life> <reuse-limit> <suppress-limit> <max-suppress-time> } | { route-map <rmap-name> } ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

dampening

Configure route flap dampening

half-life

(Optional) Decay half life

reuse-limit

(Optional) Value to start reusing a route

suppress-limit

(Optional) Value to start suppressing a route

max-suppress-time

(Optional) Maximum suppress time for stable route

route-map

(Optional) Apply route-map to specify dampening criteria

rmap-name

(Optional) Route-map name
Command Mode
  • /exec/configure/router-bgp/router-bgp-af-ipv4-mdt /exec/configure/router-bgp/router-bgp-af-l2vpn-vpls

data-pattern

{ { no | default } data-pattern | data-pattern <hex-pattern> }

Syntax Description

Syntax Description

no

default

Set a command to its defaults

data-pattern

Data Pattern

hex-pattern

Data Pattern in Hex
Command Mode
  • /exec/configure/ip-sla/udp

data-source

{ data-source <type> } | { no data-source [ <type> ] }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

data-source

Specify the data source

type

Command Mode
  • /exec/configure/telemetry/sensor-group

database-mapping

{ [ no ] database-mapping { <eid-prefix> | <eid-prefix6> } { redistribute | { { <locator> | <locator6> } priority <priority> weight <weight> } } }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

database-mapping

Configure EID-prefix and locator-set for dynamic-EID

eid-prefix

IP EID-prefix for RLOC static mapping

locator

IP address of LISP-VM routers

priority

Configures which Locators from a set are preferred

priority

Lower priority Locator takes preference

weight

Traffic load-spreading among Locators

weight

Specified in a percentage from 0 to 100

redistribute

Used for redistirbuting into routing protocols
Command Mode
  • /exec/configure/lisp-dynamic-eid /exec/configure/vrf/lisp-dynamic-eid

databits

[no] databits <i0>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

databits

Set number of databits per character

i0

Number of data bits
Command Mode
  • /exec/configure/com1

databits

[no] databits <i0>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

databits

Set number of databits per character

i0

Number of data bits
Command Mode
  • /exec/configure/console

datapath-id

datapath-id <datapathid-val> | no datapath-id

Syntax Description

Syntax Description

no

Negate a command or set its defaults

datapath-id

Datapath ID

datapathid-val

64-bit hex value [0x1-0xffffffffffffffff]
Command Mode
  • /exec/configure/openflow/switch

datapath-id

datapath-id <datapathid-val> | no datapath-id

Syntax Description

Syntax Description

no

Negate a command or set its defaults

datapath-id

Datapath ID

datapathid-val

64-bit hex value [0x1-0xffffffffffffffff]
Command Mode
  • /exec/configure/openflow/switch/sub-switch

datapath transport mts

[no] datapath transport mts

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

datapath

One Platform datapath

transport

transport for datapath

mts

mts
Command Mode
  • /exec/configure/onep

db-jid

[no] db-jid <jid> [ key-type <key-type> ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

db-jid

Jabber ID of database

jid

Enter Jabber ID of database

key-type

(Optional) Query key type for this database

key-type

(Optional)

Command Mode
  • /exec/configure/fabric-db/server-xmpp

db-security user password

[no] db-security user <user> password { 0 <clear> | 7 <encrypted> | <password> } [ shared-secret { 10 <clear> | 7 <encrypted> | <secret> } ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

db-security

Database Security

user

User ID

user

Enter user ID

password

Password

0

Password that follows should be in clear text

clear

Password in clear text

7

Password that follows should be in encrypted text

encrypted

Encrypted password

password

Enter password in clear text

shared-secret

(Optional) Shared-secret

10

(Optional) Indicates that password that follows should be in clear text

clear

(Optional) Password in clear text

7

(Optional) Password that follows should be in encrypted text

encrypted

(Optional) Encrypted password

secret

(Optional) Enter shared-secret in clear text
Command Mode
  • /exec/configure/fabric-db/server-ldap

db-table

[no] db-table <tablename> [ key-type <key-type> ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

db-table

Table name to search

tablename

Enter table name to search

key-type

(Optional) Query key type for this table

key-type

(Optional)

Command Mode
  • /exec/configure/fabric-db/server-ldap

dead-interval

{ { dead-interval <interval> } | { no dead-interval [ <interval> ] } }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

dead-interval

Dead interval

interval

(seconds)
Command Mode
  • /exec/configure/router-ospf/router-ospf-vlink /exec/configure/router-ospf/vrf/router-ospf-vlink

dead-interval

{ { dead-interval <interval> } | { no dead-interval [ <interval> ] } }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

dead-interval

Dead interval

interval

(seconds)
Command Mode
  • /exec/configure/router-ospf/vrf/router-ospf-slink

dead-interval

{ { dead-interval <interval> } | { no dead-interval [ <interval> ] } }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

dead-interval

Dead interval

interval

(seconds)
Command Mode
  • /exec/configure/router-ospf3/router-ospf3-vlink /exec/configure/router-ospf3/vrf/router-ospf3-vlink

deadtime

[no] deadtime <i0>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

deadtime

duration for which non-reachable server is skipped

i0

Length of time, in minutes
Command Mode
  • /exec/configure/tacacs+

deadtime

[no] deadtime <i0>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

deadtime

duration for which non-reachable server is skipped

i0

Length of time, in minutes
Command Mode
  • /exec/configure/ldap

deadtime

[no] deadtime <i0>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

deadtime

duration for which non-reachable server is skipped

i0

Length of time, in minutes
Command Mode
  • /exec/configure/radius

dec

dec <expr>

Syntax Description

Syntax Description

dec

calculator with results in decimal format

expr

the expression to compute (integer arithmetics)
Command Mode
  • /exec

default-information originate

[no] default-information originate [ always ] [ route-map <map-name> ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

default-information

RIP control distribution of default route

originate

RIP distribute a default route

always

(Optional) RIP always advertise default route

route-map

(Optional) Policy to constrain redistribution

map-name

(Optional) Route-map name
Command Mode
  • /exec/configure/router-rip/router-rip-af-common /exec/configure/router-rip/router-rip-vrf-af-common

default-information originate

[no] default-information originate

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

default-information

Control distribution of default information

originate

Distribute a default route
Command Mode
  • /exec/configure/router-bgp/router-bgp-af /exec/configure/router-bgp/router-bgp-af-ipv6-label /exec/configure/router-bgp/router-bgp-af-ipv4-label

default-information originate

[no] default-information originate [ always ] [ route-map <policy-name> ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

default-information

Control distribution of default route

originate

Distribute a default route

always

(Optional) Always advertise default route

route-map

(Optional) Policy to control distribution of default route

policy-name

(Optional) Route-map name
Command Mode
  • /exec/configure/router-ospf /exec/configure/router-ospf/vrf

default-information originate

[no] default-information originate [ always ] [ route-map <map-name> ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

default-information

Control origination of a default route

originate

Originate a default route

always

(Optional) Always advertise default route

route-map

(Optional) Route-map to announce default routes

map-name

(Optional) A 'routing-rules' route-map name
Command Mode
  • /exec/configure/router-isis/router-isis-vrf-common /exec/configure/router-isis/router-isis-af-common

default-information originate

[no] default-information originate [ always ] [ route-map <policy-name> ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

default-information

Control distribution of default route

originate

Distribute a default route

always

(Optional) Always advertise default route

route-map

(Optional) Policy to control distribution of default route

policy-name

(Optional) Route-map name
Command Mode
  • /exec/configure/router-ospf3/router-ospf3-af-ipv6 /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

default-information originate

[no] default-information originate [ always ] [ route-map <map> ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

default-information

Control origination of a default route

originate

Originate a default route

always

(Optional) Always advertise default route

route-map

(Optional) Use a route-map for default route metrics

map

(Optional) Route-map name
Command Mode
  • /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

default-information originate always rd route-target

{ default-information originate always rd { <ext-comm-rd-aa2nn4> | <ext-comm-rd-aa4nn2> } route-target { <ext-comm-rt-aa2nn4> | <ext-comm-rt-aa4nn2> } } | { no default-information originate always }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

default-information

Control distribution of default information

originate

Distribute a default route

always

Always advertise default route

rd

VPN Route Distinguisher

ext-comm-rd-aa4nn2

VPN route distinguisher in aa4:nn or ip:nn format

ext-comm-rd-aa2nn4

VPN route distinguisher in aa:nn format

route-target

Specify Target VPN Extended Communities

ext-comm-rt-aa4nn2

RT extcommunity in aa4:nn or ip:nn format

ext-comm-rt-aa2nn4

RT extcommunity in aa:nn format
Command Mode
  • /exec/configure/router-bgp/router-bgp-af-vpnv4 /exec/configure/router-bgp/router-bgp-af-vpnv6

default-metric

default-metric <metric> | no default-metric [ <metric> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

default-metric

RIP default metric

metric

RIP metric value
Command Mode
  • /exec/configure/router-rip/router-rip-af-common /exec/configure/router-rip/router-rip-vrf-af-common

default-metric

[no] default-metric <metric>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

default-metric

Set metric of redistributed routes

metric

Default Metric
Command Mode
  • /exec/configure/router-bgp/router-bgp-af

default-metric

{ default-metric <cost> } | { no default-metric [ <cost> ] }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

default-metric

Specify default metric for redistributed routes

cost

Metric value
Command Mode
  • /exec/configure/router-ospf /exec/configure/router-ospf/vrf

default-metric

{ default-metric <cost> } | { no default-metric [ <cost> ] }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

default-metric

Specify default metric for redistributed routes

cost

Metric value
Command Mode
  • /exec/configure/router-ospf3/router-ospf3-af-ipv6 /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

default-metric

{ { default-metric <bw> <delay> <rel> <load> <mtu> } | { no default-metric [ <bw> <delay> <rel> <load> <mtu> ] } }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

default-metric

Set metric of redistributed routes

bw

Bandwidth in Kbits per second

delay

Delay metric

rel

Reliability metric where 255 is 100% reliable

load

Effective bandwidth metric (Loading) where 255 is 100% loaded

mtu

Maximum Transmission Unit metric of the path
Command Mode
  • /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

default-miss

default-miss { continue-drop | continue-normal | continue-controller | drop | normal | controller } | no default-miss

Syntax Description

Syntax Description

no

Negate a command or set its defaults

default-miss

Set continue-drop/continue-normal/continue-controller/drop/normal/controller flow action

continue-drop

cascade drop to next table

continue-normal

cascade normal to next table

continue-controller

cascade punt to next table

drop

drop packet

normal

forward to normal dataplane

controller

punt to controller
Command Mode
  • /exec/configure/openflow/switch

default-originate

[ no | default ] default-originate [ route-map <rmap-name> ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

default-originate

Originate a default toward this peer

route-map

(Optional) Route-map to specify criteria for originating default

rmap-name

(Optional) Route-map name
Command Mode
  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af

default echo revision

default echo { revision | vendor-extension }

Syntax Description

Syntax Description

default

Set a command to its defaults

echo

Echo Request attributes

revision

Echo packet default revision

vendor-extension

Send Vendor Extension TLV with echo Req
Command Mode
  • /exec/configure/mpls-oam

define

[no] define <paramname> [ <paramtype> ] [ <paramdesc> ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

define

Define a parameter

paramname

Enter the name of the parameter

paramtype

(Optional) param type

paramdesc

(Optional) Enter the parameter description
Command Mode
  • /exec/configure/param-list

delay

delay <delay_val> | no delay [ <delay_val> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

delay

Specify interface throughput delay

delay_val

Throughput delay (tens of microseconds)
Command Mode
  • /exec/configure/if-ether-sub /exec/configure/if-ether-sub-p2p /exec/configure/if-port-channel-sub

delay

delay <delay_val> | no delay [ <delay_val> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

delay

Specify interface throughput delay

delay_val

Throughput delay (tens of microseconds)
Command Mode
  • /exec/configure/if-ethernet-all /exec/configure/if-eth-non-member /exec/configure/if-port-channel /exec/configure/if-ethernet-all /exec/configure/if-ethernet-p2p /exec/configure/if-remote-ethernet-sub /exec/configure/if-port-channel-range

delay

delay <microseconds> | no delay

Syntax Description

Syntax Description

no

Negate a command or set its defaults

delay

Specify interface throughput delay

microseconds

Throughput delay (tens of microseconds)
Command Mode
  • /exec/configure/if-vlan-common

delay peer-link

delay peer-link <time> | no delay peer-link

Syntax Description

Syntax Description

no

Negate a command or set its defaults

delay

Peer-link bringup delay

peer-link

Delay peer-link bringup

time

Delay in bringing up the peer-link (in seconds)
Command Mode
  • /exec/configure/vpc-domain

delay restore

delay restore <time-out> | no delay restore

Syntax Description

Syntax Description

no

Negate a command or set its defaults

delay

Initialization delay

restore

Delay after restoring peer-link

time-out

Delay in bringing up the vPC links (in seconds)
Command Mode
  • /exec/configure/vpc-domain

delay restore interface-vlan

delay restore interface-vlan <time-out> | no delay restore interface-vlan

Syntax Description

Syntax Description

no

Negate a command or set its defaults

delay

Initialization delay

restore

Delay after restoring peer-link

interface-vlan

Delay in bringing-up interface-vlan

time-out

Delay in bringing up the interface-vlan (in seconds)
Command Mode
  • /exec/configure/vpc-domain

delay restore orphan-port

delay restore orphan-port <delay_time> | no delay restore orphan-port

Syntax Description

Syntax Description

no

Negate a command or set its defaults

delay

Initialization delay

restore

Delay after restoring peer-link

orphan-port

Configure vPC orphan-port delay bring-up timer

delay_time

Specify delay time in seconds
Command Mode
  • /exec/configure/vpc-domain

delay up

delay { { up <up_delay> [ down <down_delay> ] } | { down <down_delay> [ up <up_delay> ] } } | no delay

Syntax Description

Syntax Description

no

Negate a command or set its defaults

delay

Tracking delay

up

Delay up change notification

up_delay

Seconds to delay

down

(Optional) Delay down change notification

down_delay

(Optional) Seconds to delay
Command Mode
  • /exec/configure/track /exec/configure/tr-list-bool /exec/configure/tr-list-thrp /exec/configure/tr-list-thrw

delete

delete { <uri0> | <uri1> | <uri2> } [ no-prompt ]

Syntax Description

Syntax Description

delete

delete a file or directory

uri0

Delete a file or directory

uri1

Delete a file or directory on expansion flash

uri2

Directory or filename on logflash

no-prompt

(Optional) Do not prompt for multiple deletion of files
Command Mode
  • /exec

delete ca-certificate

delete ca-certificate

Syntax Description

Syntax Description

delete

Delete the certificates

ca-certificate

Delete the ca certificates
Command Mode
  • /exec/configure/trustpoint

delete certificate

delete certificate [ force ]

Syntax Description

Syntax Description

delete

Delete the certificates

certificate

Delete the identity certificate

force

(Optional) Force delete the identity certificate
Command Mode
  • /exec/configure/trustpoint

delete crl

delete crl

Syntax Description

Syntax Description

delete

Delete the certificates

crl

Delete the CRL
Command Mode
  • /exec/configure/trustpoint

demand-circuit

[no] demand-circuit

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

demand-circuit

OSPF Demand circuit
Command Mode
  • /exec/configure/router-ospf/vrf/router-ospf-slink

description

description <describe> | no description

Syntax Description

Syntax Description

no

Negate a command or set its defaults

description

Description for the BMP server

describe

Upto 80 characters describing this server
Command Mode
  • /exec/configure/router-bgp/router-bgp-bmp-server

description

description <describe> | { no | default } description [ <describe> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

description

Neighbor specific description

describe

Upto 80 characters describing this neighbor
Command Mode
  • /exec/configure/router-bgp/router-bgp-neighbor-sess

description

{ description <descr> } | { no description }

Syntax Description

Syntax Description

description

Configure description of the profile

descr

Description of maximum 64 characters
Command Mode
  • /exec/configure/configngoamprofile

description

description <line> | no description

Syntax Description

Syntax Description

no

Negate a command or set its defaults

description

Add a description for the role

line

Enter the description string(can include spaces)
Command Mode
  • /exec/configure/role

description

{ description <line> | no description }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

description

Description of the route-map

line

Route-map description string
Command Mode
  • /exec/configure/route-map

description

description <desc_line> | no description [ <desc_line> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

description

Enter description of maximum 254 characters

desc_line

Description of maximum 254 characters
Command Mode
  • /exec/configure/if-eth-base /exec/configure/if-port-channel /exec/configure/if-eth-port-channel /exec/configure/if-ether-sub /exec/configure/if-ether-sub-p2p /exec/configure/if-port-channel-sub /exec/configure/if-loopback /exec/configure/if-ethernet-all /exec/configure/if-ethernet-p2p /exec/configure/if-remote-ethernet-sub /exec/configure/if-port-channel-range

description

description <desc_line> | no description [ <desc_line> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

description

Enter description of maximum 254 characters

desc_line

Description of maximum 254 characters
Command Mode
  • /exec/configure/if-mgmt-ether

description

description <desc_line> | no description [ <desc_line> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

description

Enter description of maximum 254 characters

desc_line

Description of maximum 254 characters
Command Mode
  • /exec/configure/if-nve

description

description <desc_line> | no description [ <desc_line> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

description

Enter description of maximum 80 characters

desc_line

Description of maximum 80 characters
Command Mode
  • /exec/configure/if-overlay /exec/configure/if-te /exec/configure/if-nve

description

description <desc_line> | no description [ <desc_line> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

description

Enter description of maximum 254 characters

desc_line

Description of maximum 254 characters
Command Mode
  • /exec/configure/if-any-tunnel

description

[no] description <description>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

description

Configure description for the policy

description

Description for the policy
Command Mode
  • /exec/configure/event-manager-applet

description

[no] description

Syntax Description

Syntax Description

no

Negate a command or set its defaults

description

Configure description for the policy
Command Mode
  • /exec/configure/event-manager-applet

description

{ description <desc-str> | no description [ <desc-str> ] }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

description

Class-Map description

desc-str

Description of this class-map (up to 200 characters)
Command Mode
  • /exec/configure/class-map

description

[no] description <desc-str>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

description

Class-Map description

desc-str

Description of this class-map (up to 200 characters)
Command Mode
  • /exec/configure/class-map/type/queuing

description

{ description <desc-str> | no description [ <desc-str> ] }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

description

Table-Map description

desc-str

Description of this table-map (up to 200 characters)
Command Mode
  • /exec/configure/table-map

description

{ description <desc-str> | no description [ <desc-str> ] }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

description

Policy-Map description

desc-str

Description of this policy-map (up to 200 characters)
Command Mode
  • /exec/configure/policy-map

description

{ description <desc-str> | no description [ <desc-str> ] }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

description

Policy-Map description

desc-str

Description of this policy-map (up to 200 characters)
Command Mode
  • /exec/configure/policy-map/type/queuing

description

[no] description [ <desc> ] | description <desc>

Syntax Description

Syntax Description

no

Negate a command or set its defaults

description

Group description

desc

(Optional) Up to 80 characters describing this group
Command Mode
  • /exec/configure/if-eth-any/vrrpv3

description

{ [ no ] description <line> | no description }

Syntax Description

Syntax Description

description

Provide a description for this Flow Record

line

Record description string (63 characters maximum)
Command Mode
  • /exec/configure/nfm-record

description

{ [ no ] description <line> | no description }

Syntax Description

Syntax Description

description

Provide a description for this Flow Monitor

line

Monitor description string (63 characters maximum)
Command Mode
  • /exec/configure/nfm-monitor

description

{ [ no ] description <line> | no description }

Syntax Description

Syntax Description

description

Provide a description for this Flow Exporter

line

Monitor description string (63 characters maximum)
Command Mode
  • /exec/configure/nfm-exporter

description

{ [ no ] description <line> | no description }

Syntax Description

Syntax Description

description

Provide a description for this Flow Sampler

line

Sampler description string (63 characters maximum)
Command Mode
  • /exec/configure/nfm-sampler

description

description [ port-profile ] <desc_line> | no description [ port-profile ] [ <desc_line> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

description

Enter port-profile description of maximum 80 characters

port-profile

(Optional) Hack for conf-sync

desc_line

Enter port-profile description of maximum 80 characters
Command Mode
  • /exec/configure/port-profile

description

{ description <desc-str> | no description [ <desc-str> ] }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

description

Class-Map description

desc-str

Description of this class-map (up to 200 characters)
Command Mode
  • /exec/configure/class-map/type/uf

description

{ description <desc-str> | no description [ <desc-str> ] }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

description

Policy-Map description

desc-str

Description of this policy-map (up to 200 characters)
Command Mode
  • /exec/configure/policy-map/type/uf

description

{ description <description_text> | no description [ <description_text> ] }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

description

Virtual service description

description_text

Description of this virtual service
Command Mode
  • /exec/configure/virt-serv

description

{ [ no ] description <text> }

Syntax Description

Syntax Description

description

description for this profile

text

description
Command Mode
  • /exec/configure/dot1x-cred

description

{ description <line> } | { no description }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

description

Description of the VRF

line

VRF description string
Command Mode
  • /exec/configure/vrf

description

description <desc_line> | no description

Syntax Description

Syntax Description

no

Negate a command or set its defaults

description

Interface specific description

desc_line

Up to 255 characters describing this interface
Command Mode
  • /exec/configure/if-vlan-common

description

{ [ no ] description <descrip-string> }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

description

Provide a description string for the LISP site

descrip-string

Description string
Command Mode
  • /exec/configure/lisp-site /exec/configure/vrf/lisp-site

description description

[no] description | description <desc>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

description

Pathway description

desc

Up to 80 characters describing this pathway
Command Mode
  • /exec/configure/if-eth-any/vrrs

dest-ipaddr

{ { no | default } dest-ipaddr | dest-ipaddr { <ip-address> | <hostname> } }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

default

Set a command to its defaults

dest-ipaddr

Destination ip address

ip-address

IP address, broadcast disallowed

hostname

IP Hostname, broadcast disallowed
Command Mode
  • /exec/configure/ip-sla/udp /exec/configure/ip-sla/jitter /exec/configure/ip-sla/tcp

dest-port

{ { no | default } dest-port | dest-port <port> }

Syntax Description

Syntax Description

no

default

Set a command to its defaults

dest-port

Destination port

port

udp port number
Command Mode
  • /exec/configure/ip-sla/udp /exec/configure/ip-sla/jitter /exec/configure/ip-sla/tcp

destination-group

[no] destination-group <dgrp-id>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-group

Create destination group
Command Mode
  • /exec/configure/telemetry

destination-profile

[no] destination-profile <s0>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

s0

User defined destination profile name
Command Mode
  • /exec/configure/callhome

destination-profile CiscoTAC-1 alert-group

[no] destination-profile CiscoTAC-1 alert-group { All | Configuration | Diagnostic | EEM | Cisco-TAC | Environmental | Inventory | License | Linecard-Hardware | Supervisor-Hardware | Syslog-group-port | System | Test }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

CiscoTAC-1

Configure destination profile for XML message

alert-group

Add alert group

All

This alert group consists of all of the callhome messages

Cisco-TAC

Events which are meant for Cisco TAC only

Environmental

Power,fan,temperature related events

Inventory

Inventory status events

License

Events related to licensing

Linecard-Hardware

Linecard related events

Supervisor-Hardware

Supervisor related events

Syslog-group-port

Events related to syslog messages filed by port manager

System

Software related events

Test

User generated test events

Configuration

Events related to Configuration

Diagnostic

Events related to Diagnostic

EEM

EEM events
Command Mode
  • /exec/configure/callhome

destination-profile CiscoTAC-1 email-addr

[no] destination-profile CiscoTAC-1 email-addr <s0>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

CiscoTAC-1

Configure destination profile for XML message

email-addr

Add email addr

s0

Provide email address, example: jdow@xyz.com
Command Mode
  • /exec/configure/callhome

destination-profile CiscoTAC-1 http

[no] destination-profile CiscoTAC-1 http <s0>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

CiscoTAC-1

Configure destination profile for XML message

http

Add http or https url

s0

Provide http or https url, example1: http://site.com/services/callserv example2: https://site2.com/serv/CALL
Command Mode
  • /exec/configure/callhome

destination-profile CiscoTAC-1 message-level

destination-profile CiscoTAC-1 message-level <i0>

Syntax Description

Syntax Description

destination-profile

Configure destination profiles

CiscoTAC-1

Configure destination profile for XML message

message-level

Callhome message level(0-lowest urgency, 9-highest urgency)

i0

Command Mode
  • /exec/configure/callhome

destination-profile CiscoTAC-1 message-size

destination-profile CiscoTAC-1 message-size <i0>

Syntax Description

Syntax Description

destination-profile

Configure destination profiles

CiscoTAC-1

Configure destination profile for XML message

message-size

Configure maximum message size (default 5000000)

i0

Provide maximum possible message size
Command Mode
  • /exec/configure/callhome

destination-profile CiscoTAC-1 transport-method email

[no] destination-profile CiscoTAC-1 transport-method email

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

CiscoTAC-1

Configure destination profile for XML message

transport-method

Callhome message sending transport-method

email

email transport-method
Command Mode
  • /exec/configure/callhome

destination-profile CiscoTAC-1 transport-method http

[no] destination-profile CiscoTAC-1 transport-method http

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

CiscoTAC-1

Configure destination profile for XML message

transport-method

Callhome message sending transport-method

http

http transport-method
Command Mode
  • /exec/configure/callhome

destination-profile alert-group

[no] destination-profile <s0> alert-group { All | Configuration | Diagnostic | EEM | Cisco-TAC | Environmental | Inventory | License | Linecard-Hardware | Supervisor-Hardware | Syslog-group-port | System | Test }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

s0

User defined destination profile name

alert-group

Add alert group

All

This alert group consists of all of the callhome messages

Cisco-TAC

Events which are meant for Cisco TAC only

Environmental

Power,fan,temperature related events

Inventory

Inventory status events

License

Events related to licensing

Linecard-Hardware

Linecard related events

Supervisor-Hardware

Supervisor related events

Syslog-group-port

Events related to syslog messages filed by port manager

System

Software related events

Test

User generated test events

Configuration

Events related to Configuration

Diagnostic

Events related to Diagnostic

EEM

EEM events
Command Mode
  • /exec/configure/callhome

destination-profile email-addr

[no] destination-profile <s0> email-addr <s1>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

s0

User defined destination profile name

email-addr

Add email addr

s1

Provide email address, example: jdow@xyz.com
Command Mode
  • /exec/configure/callhome

destination-profile format

destination-profile <s0> format { full-txt | short-txt | XML }

Syntax Description

Syntax Description

destination-profile

Configure destination profiles

s0

User defined destination profile name

format

Callhome message format (default XML)

full-txt

Plain text message format

short-txt

Short text message format

XML

XML message format
Command Mode
  • /exec/configure/callhome

destination-profile full-txt-destination alert-group

[no] destination-profile full-txt-destination alert-group { All | Configuration | Diagnostic | EEM | Cisco-TAC | Environmental | Inventory | License | Linecard-Hardware | Supervisor-Hardware | Syslog-group-port | System | Test }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

full-txt-destination

Configure destination profile for plain txt message

alert-group

Add alert group

All

This alert group consists of all of the callhome messages

Cisco-TAC

Events which are meant for Cisco TAC only

Environmental

Power,fan,temperature related events

Inventory

Inventory status events

License

Events related to licensing

Linecard-Hardware

Linecard related events

Supervisor-Hardware

Supervisor related events

Syslog-group-port

Events related to syslog messages filed by port manager

System

Software related events

Test

User generated test events

Configuration

Events related to Configuration

Diagnostic

Events related to Diagnostic

EEM

EEM events
Command Mode
  • /exec/configure/callhome

destination-profile full-txt-destination email-addr

[no] destination-profile full-txt-destination email-addr <s0>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

full-txt-destination

Configure destination profile for plain txt message

email-addr

Add email addr

s0

Provide email address, example: jdow@xyz.com
Command Mode
  • /exec/configure/callhome

destination-profile full-txt-destination http

[no] destination-profile full-txt-destination http <s0>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

full-txt-destination

Configure destination profile for plain txt message

http

Add http or https url

s0

Provide http or https url, example1: http://site.com/services/callserv example2: https://site2.com/serv/CALL
Command Mode
  • /exec/configure/callhome

destination-profile full-txt-destination message-level

destination-profile full-txt-destination message-level <i0>

Syntax Description

Syntax Description

destination-profile

Configure destination profiles

full-txt-destination

Configure destination profile for plain txt message

message-level

Callhome message level(0-lowest urgency, 9-highest urgency)

i0

Command Mode
  • /exec/configure/callhome

destination-profile full-txt-destination message-size

destination-profile full-txt-destination message-size <i0>

Syntax Description

Syntax Description

destination-profile

Configure destination profiles

full-txt-destination

Configure destination profile for plain txt message

message-size

Configure maximum message size (default 2500000)

i0

Provide maximum possible message size
Command Mode
  • /exec/configure/callhome

destination-profile full-txt-destination transport-method email

[no] destination-profile full-txt-destination transport-method email

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

full-txt-destination

Configure destination profile for plain txt message

transport-method

Callhome message sending transport-method

email

email transport-method
Command Mode
  • /exec/configure/callhome

destination-profile full-txt-destination transport-method http

[no] destination-profile full-txt-destination transport-method http

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

full-txt-destination

Configure destination profile for plain txt message

transport-method

Callhome message sending transport-method

http

http transport-method
Command Mode
  • /exec/configure/callhome

destination-profile http

[no] destination-profile <s4> { http <s2> }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

s4

User defined destination profile name

http

Add http or https url

s2

Provide http or https url, example1: http://site.com/services/callserv example2: https://site2.com/serv/CALL
Command Mode
  • /exec/configure/callhome

destination-profile message-level

destination-profile <s0> message-level <i0>

Syntax Description

Syntax Description

destination-profile

Configure destination profiles

s0

User defined destination profile name

message-level

Callhome message level(0-lowest urgency, 9-highest urgency)

i0

Command Mode
  • /exec/configure/callhome

destination-profile message-size

destination-profile <s0> message-size <i0>

Syntax Description

Syntax Description

destination-profile

Configure destination profiles

s0

User defined destination profile name

message-size

Configure maximum message size (default 2500000)

i0

Provide maximum possible message size
Command Mode
  • /exec/configure/callhome

destination-profile short-txt-destination alert-group

[no] destination-profile short-txt-destination alert-group { All | Configuration | Diagnostic | EEM | Cisco-TAC | Environmental | Inventory | License | Linecard-Hardware | Supervisor-Hardware | Syslog-group-port | System | Test }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

short-txt-destination

Configure destination profile for short txt message

alert-group

Add alert group

All

This alert group consists of all of the callhome messages

Cisco-TAC

Events which are meant for Cisco TAC only

Environmental

Power,fan,temperature related events

Inventory

Inventory status events

License

Events related to licensing

Linecard-Hardware

Linecard related events

Supervisor-Hardware

Supervisor related events

Syslog-group-port

Events related to syslog messages filed by port manager

System

Software related events

Test

User generated test events

Configuration

Events related to Configuration

Diagnostic

Events related to Diagnostic

EEM

EEM events
Command Mode
  • /exec/configure/callhome

destination-profile short-txt-destination email-addr

[no] destination-profile short-txt-destination email-addr <s0>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

short-txt-destination

Configure destination profile for short txt message

email-addr

Add email addr

s0

Provide email address, example: jdow@xyz.com
Command Mode
  • /exec/configure/callhome

destination-profile short-txt-destination http

[no] destination-profile short-txt-destination http <s0>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

short-txt-destination

Configure destination profile for short txt message

http

Add http or https url

s0

Provide http or https url, example1: http://site.com/services/callserv example2: https://site2.com/serv/CALL
Command Mode
  • /exec/configure/callhome

destination-profile short-txt-destination message-level

destination-profile short-txt-destination message-level <i0>

Syntax Description

Syntax Description

destination-profile

Configure destination profiles

short-txt-destination

Configure destination profile for short txt message

message-level

Callhome message level(0-lowest urgency, 9-highest urgency)

i0

Command Mode
  • /exec/configure/callhome

destination-profile short-txt-destination message-size

destination-profile short-txt-destination message-size <i0>

Syntax Description

Syntax Description

destination-profile

Configure destination profiles

short-txt-destination

Configure destination profile for short txt message

message-size

Configure maximum message size (default 4000)

i0

Command Mode
  • /exec/configure/callhome

destination-profile short-txt-destination transport-method email

[no] destination-profile short-txt-destination transport-method email

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

short-txt-destination

Configure destination profile for short txt message

transport-method

Callhome message sending transport-method

email

email transport-method
Command Mode
  • /exec/configure/callhome

destination-profile short-txt-destination transport-method http

[no] destination-profile short-txt-destination transport-method http

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

short-txt-destination

Configure destination profile for short txt message

transport-method

Callhome message sending transport-method

http

http transport-method
Command Mode
  • /exec/configure/callhome

destination-profile transport-method email

[no] destination-profile <s5> transport-method email

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

s5

User defined destination profile name

transport-method

Callhome message sending transport-method

email

email transport-method
Command Mode
  • /exec/configure/callhome

destination-profile transport-method http

[no] destination-profile <s6> transport-method http

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

destination-profile

Configure destination profiles

s6

User defined destination profile name

transport-method

Callhome message sending transport-method

http

http transport-method
Command Mode
  • /exec/configure/callhome

destination

{ [ no ] destination { <ipaddr> | <ipv6addr> } [ use-vrf { <vrf_name> | <vrf-known-name> } ] | no destination }

Syntax Description

Syntax Description

destination

Specify the destination address

ipaddr

Destination IP address for collector

use-vrf

(Optional) Optional VRF label

vrf_name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name
Command Mode
  • /exec/configure/nfm-exporter

destination

[no] destination | destination <ipaddr>

Syntax Description

Syntax Description

no

Negate a command or set its defaults

destination

destination of tunnel

ipaddr

ip address (A.B.C.D)
Command Mode
  • /exec/configure/if-te

destination filter ip

[no] destination filter ip { <ip-addr> <ip-mask> } [ ip | { { udp | tcp } { <port_num> | any } } ] [ { arp | advertise } { enable | disable } ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

destination

destination ip configuration

filter

list of ips to filter

ip

destination ip

ip-addr

IP address in format i.i.i.i

ip-mask

IP network mask in format m.m.m.m

ip

(Optional) IP Protocol

udp

(Optional) UDP Protocol

tcp

(Optional) TCP Protocol

port_num

(Optional) Port Number

any

(Optional) Any Port Number

arp

(Optional) ARP

advertise

(Optional) advertise

enable

(Optional) Enable

disable

(Optional) Disable
Command Mode
  • /exec/configure/smartc

destination filter ip any any

[no] destination filter ip any any

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

destination

destination ip configuration

filter

list of ips to filter

ip

destination ip

any

Any IP
Command Mode
  • /exec/configure/smartc

device-group

{ device-group <name> } | { no device-group <name> }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

device-group

ITD device group

name

ITD device group name
Command Mode
  • /exec/configure/itd

device-group

{ device-group <name> } | { no device-group <name> }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

device-group

ITD device group

name

ITD device group name
Command Mode
  • /exec/configure/itd

devtest sap

devtest sap <sap> [ exec <func> ]

Syntax Description

Syntax Description

devtest

Remote API invocation (helps testing and debugging)

sap

Specify the SAP address of the destination queue

sap

SAP address of the destination queue (0 == Registry)

exec

(Optional) Specify the API name to be invoked on the remote feature

func

(Optional) Examples:
Command Mode
  • /exec

diagnostic bootup level

[no] diagnostic bootup level

Syntax Description

Syntax Description

no

Negate a command or set its defaults

diagnostic

Diagnostic commands

bootup

Configure Diagnostic for bootup

level

Select diagnostic level
Command Mode
  • /exec/configure

diagnostic bootup level bypass

diagnostic bootup level { bypass | complete }

Syntax Description

Syntax Description

diagnostic

Diagnostic commands

bootup

Configure Diagnostic for bootup

level

Select diagnostic level

bypass

Skip all bootup test

complete

Complete level
Command Mode
  • /exec/configure

diagnostic clear result module all diagnostic clear result module test

diagnostic clear result module all | diagnostic clear result module <module> test { <test-id> | all }

Syntax Description

Syntax Description

diagnostic

Diagnostic commands

clear

Erase Diagnostic Test Results/Stats

result

Diagnostic test result

module

Module keyword

module

Module number

all

Select all

test

Diagnostic test selection

test-id

Command Mode
  • /exec

diagnostic eem action aggressive

[no] diagnostic eem action aggressive

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

diagnostic

Diagnostic commands

eem

Configure Diagnostic for eem

action

Select diagnostic action

aggressive

Take aggressive default actions
Command Mode
  • /exec/configure

diagnostic monitor interval module test all hour min second

diagnostic monitor interval module <module> test { all | <name> | <test-id> } hour <hour-cntr> min <min-cntr> second <sec-cntr> | no diagnostic monitor interval module <module> test { all | <name> | <test-id> }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

diagnostic

Diagnostic commands

monitor

Configure diagnostic monitoring test

interval

Configure diagnostic monitoring tests interval

module

Module Keyword

module

Module number

test

Diagnostic test selection

all

Select all test ID

test-id

name

Test name

hour

Hour of the day

hour-cntr

Interval in hours

min

Minute of an hour

min-cntr

Interval in minutes

second

Second of a minute

sec-cntr

Interval in seconds
Command Mode
  • /exec/configure

diagnostic monitor module all

[no] diagnostic monitor module all [ test <name> ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

diagnostic

Diagnostic commands

monitor

Configure diagnostic monitoring test

module

Module Keyword

all

Select all module ID

test

(Optional) Diagnostic test selection

name

(Optional) Test name
Command Mode
  • /exec/configure

diagnostic monitor module test all

diagnostic monitor module <module> test { all | <name> | <test-id> } | no diagnostic monitor module <module> test { all | <name> | <test-id> }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

diagnostic

Diagnostic commands

monitor

Configure diagnostic monitoring test

module

Module Keyword

module

Module number

test

Diagnostic test selection

all

Select all test ID

test-id

name

Test name
Command Mode
  • /exec/configure

diagnostic ondemand action-on-failure continue failure-count diagnostic ondemand action-on-failure stop

diagnostic ondemand action-on-failure continue failure-count <failure-cnt> | diagnostic ondemand action-on-failure stop

Syntax Description

Syntax Description

diagnostic

Diagnostic commands

ondemand

On demand diagnostic setting

action-on-failure

Set action to take if test fails

continue

Continue ondemand test until test failure limit is reached

failure-count

Continue failing tests this many times

stop

Stop ondemand tests immediately if a test fails

failure-cnt

Maximum number of test failures allowed
Command Mode
  • /exec

diagnostic ondemand iteration

diagnostic ondemand iteration <iteration-count>

Syntax Description

Syntax Description

diagnostic

Diagnostic commands

ondemand

On demand diagnostic setting

iteration

Set number of times to repeat ondemand test list

iteration-count

Number of times to repeat ondemand test list
Command Mode
  • /exec

diagnostic ondemand test-parameter module test port_lb packet-length

diagnostic ondemand test-parameter module <module> test port_lb packet-length <size>

Syntax Description

Syntax Description

diagnostic

Diagnostic commands

ondemand

Ondemand command

test-parameter

Set test parameter

module

Module keyword

module

Module number

test

Diagnostic test selection

port_lb

Port loop back test

packet-length

Size of the packet

size

Packet size for the selected module
Command Mode
  • /exec

diagnostic pss shrink

diagnostic pss shrink

Syntax Description

Syntax Description

diagnostic

Diagnostic commands

pss

PSS command

shrink

compact the diag_port_lb PSS
Command Mode
  • /exec

diagnostic start module test

diagnostic start module <module> test { all | <name> | <test-id> | non-disruptive | per-port } [ port { iall | <port-id> } ]

Syntax Description

Syntax Description

diagnostic

Diagnostic commands

start

Starting on demand diagnostic

module

Module keyword

module

Module Number

test

Diagnostic test selection

all

Select all test ID

name

Test name

test-id

non-disruptive

Select the Non-Disruptive test suite [Attribute = N]

per-port

Select the Per-Port test suite [Attribute = P]

port

(Optional) Interface port selection

iall

(Optional) Select all ports

port-id

(Optional)

Command Mode
  • /exec

diagnostic stop module test all

diagnostic stop module <module> test { all | <name> | <test-id> }

Syntax Description

Syntax Description

diagnostic

Diagnostic commands

stop

Stopping diagnostic

module

Module keyword

module

Module Number

test

Diagnostic test selection

all

Select all test ID

test-id

name

Test name
Command Mode
  • /exec

diagnostic test simulation module test diagnostic test simulation module test clear

diagnostic test simulation module <module> test <test-id> [ port { <port-id> | all } ] { success | fail | random-fail } | diagnostic test simulation module <module> test <test-id> clear

Syntax Description

Syntax Description

diagnostic

Diagnostic commands

test

Diagnostic test selection

simulation

Simulating Diagnostic result

module

Module keyword

module

Module Number

test

Diagnostic test selection

test-id

port

(Optional) Interface port selection

all

(Optional) Select all ports

port-id

(Optional)

success

pass test result

fail

fail test result

random-fail

fail test result randomly

clear

Stop simulation
Command Mode
  • /exec

diff-clean

diff-clean [ all-sessions ]

Syntax Description

Syntax Description

diff-clean

remove temp files created by '| diff' filters

all-sessions

(Optional) remove '| diff' temp files from all sessions (past and present!) of current user
Command Mode
  • /exec

diff-clean all-users

diff-clean all-users

Syntax Description

Syntax Description

diff-clean

remove temp files created by '| diff' filters

all-users

remove '| diff' temp files from all sessions (past and present!) of all users
Command Mode
  • /exec

diff

| diff [ again | echo | -c [ <lines> ] | -b | -B | -i | -I <regexp> | -y | --left-column | -W <columns> | -q | -s ] +

Syntax Description

Syntax Description

|

Pipe command output to filter

diff

show difference between current and previous invocation (creates temp files: remove them with 'diff-clean' command and dont use it on commands with big outputs, like 'show tech'!)

again

(Optional) dont create new file: use old ones, just change display options or add more filters

echo

(Optional) echo the current file (only effective if no old file)

-c

(Optional) set number of lines of context (default 3)

lines

(Optional) number of lines of context

-b

(Optional) Ignore changes in amount of white space

-B

(Optional) Ignore changes that just insert or delete blank lines

-i

(Optional) Ignore changes in case

-I

(Optional) Ignore changes that just insert or delete lines that match regexp

regexp

(Optional) regexp of lines to ignore

-y

(Optional) Use the side by side output format

--left-column

(Optional) Print only the left column of two common lines in side by side format

-W

(Optional) Use an output width of <columns> in side by side format

columns

(Optional) Use an output width of <columns> in side by side format

-q

(Optional) Report only whether the files differ, not the details of the differences

-s

(Optional) Report when two files are the same
Command Mode
  • /output

dir

dir [ <uri0> | <uri1> | <uri2> ] [ __readonly__ { TABLE_dir <fsize> <timestring> <fname> } { <usage> <bytesused> <bytesfree> <bytestotal> } ]

Syntax Description

Syntax Description

dir

list files in a directory

uri0

(Optional) Directory or filename

uri1

(Optional) Directory or filename on expansion flash

uri2

(Optional) Directory or filename on log flash

__readonly__

(Optional) Read Only

TABLE_dir

(Optional) show dir

fsize

(Optional) filesize

timestring

(Optional) time string

fname

(Optional) filename

usage

(Optional) usage

bytesused

(Optional) bytes used

bytesfree

(Optional) bytes free

bytestotal

(Optional) bytes total
Command Mode
  • /exec

disable-connected-check

[ no | default ] disable-connected-check

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

disable-connected-check

Disable check for directly connected peer
Command Mode
  • /exec/configure/router-bgp/router-bgp-neighbor-sess

disable-memory-alert-check

[no] disable-memory-alert-check

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

disable-memory-alert-check

Disables the system memory alert handling in BGP
Command Mode
  • /exec/configure/router-bgp

disable-peer-as-check

[ no | default ] disable-peer-as-check

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

disable-peer-as-check

Disable checking of peer AS-number while advertising
Command Mode
  • /exec/configure/router-bgp/router-bgp-vrf-neighbor/router-bgp-vrf-neighbor-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-neighbor/router-bgp-vrf-neighbor-af-ipv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

disable-policy-batching

[no] disable-policy-batching [ nexthop | { { ipv4 | ipv6 } prefix-list <prfxlist-name> } ]

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

disable-policy-batching

Disable batching evaluation of outbound policy for a peer

nexthop

(Optional) batching based on nexthop

ipv4

(Optional) IPv4 address-family

ipv6

(Optional) IPv6 address-family

prefix-list

(Optional) Apply prefix-list

prfxlist-name

(Optional) Name of prefix-list
Command Mode
  • /exec/configure/router-bgp

disable

disable

Syntax Description

Syntax Description

disable

disable callhome
Command Mode
  • /exec/configure/callhome

discard-route external

[no] discard-route { external | internal }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

discard-route

Install discard route

external

External route

internal

Internal route
Command Mode
  • /exec/configure/router-ospf /exec/configure/router-ospf/vrf

discard-route external

[no] discard-route { external | internal }

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

discard-route

Install discard route

external

External route

internal

Internal route
Command Mode
  • /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

discovery

discovery { quick-start | hello { holdtime <link-hello-holdtime> | interval <link-hello-intvl> } | targeted-hello { accept [ from <pfx-list> ] | tgt-holdtime <tgt-hello-holdtime> | tgt-interval <tgt-hello-intvl> } | ignore-transport-address | omit-transport-address | spoofing } | no discovery { quick-start | hello { holdtime | interval } | targeted-hello { accept | tgt-holdtime | tgt-interval } | ignore-transport-address | omit-transport-address | spoofing }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

discovery

LDP discovery

quick-start

Enable quick LDP Hello transmissions on interface up

hello

LDP discovery Hello

interval

LDP discovery Hello interval

holdtime

LDP discovery Hello holdtime

link-hello-holdtime

Holdtime in seconds

link-hello-intvl

Hello interval in seconds

targeted-hello

LDP discovery Targeted Hello

accept

Accept targeted hellos

from

(Optional) Prefix list to specify acceptable targeted hello sources

pfx-list

(Optional) Name of prefix list

tgt-holdtime

LDP discovery Targeted Hello holdtime

tgt-hello-holdtime

Holdtime in seconds

tgt-interval

LDP discovery Targeted Hello interval

tgt-hello-intvl

Hello interval in seconds

ignore-transport-address

omit-transport-address

spoofing
Command Mode
  • /exec/configure/ldp

distance

distance <distance> | no distance [ <distance> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

distance

RIP administrative distance

distance

RIP administrative distance
Command Mode
  • /exec/configure/router-rip/router-rip-af-common /exec/configure/router-rip/router-rip-vrf-af-common

distance

distance <ebgp-dist> <ibgp-dist> <local-dist> | no distance [ <ebgp-dist> <ibgp-dist> <local-dist> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

distance

Configure administrative distance

ebgp-dist

Distance for EBGP routes

ibgp-dist

Distance for IBGP routes

local-dist

Distance for local routes
Command Mode
  • /exec/configure/router-bgp/router-bgp-af

distance

distance <admin-dist> | no distance [ <admin-dist> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

distance

OSPF administrative distance

admin-dist

adminitrative distance value
Command Mode
  • /exec/configure/router-ospf /exec/configure/router-ospf/vrf

distance

distance <admin-dist> | no distance [ <admin-dist> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

distance

Administrative distance

admin-dist

Distance value
Command Mode
  • /exec/configure/router-isis/router-isis-vrf-common /exec/configure/router-isis/router-isis-af-ipv6

distance

distance <admin-dist> | no distance [ <admin-dist> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

distance

OSPFv3 administrative distance

admin-dist

adminitrative distance value
Command Mode
  • /exec/configure/router-ospf3/router-ospf3-af-ipv6 /exec/configure/router-ospf3/vrf/router-ospf3-af-ipv6

distance

{ { distance <int-distance> <ext-distance> } | { no distance [ <int-distance> <ext-distance> ] } }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

distance

Define an administrative distance

int-distance

Distance for internal routes

ext-distance

Distance for external routes
Command Mode
  • /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

distribute-list route in

[no] distribute-list { { route-map <map> } | { prefix-list <list> } } { in | out } <interface>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

distribute-list

Filter networks in routing updates

route-map

Use a route-map for route filtering

map

Route-map name

prefix-list

Use a prefix-list for route filtering

list

Reference to prefix-list name

in

Filter incoming routing updates

out

Filter outgoing routing updates

interface

Interface name
Command Mode
  • /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

distribute into route-map all

{ { distribute <src-level> into <dst-level> { { route-map { <map-name> | <rtr_pol_name> } } | all } } | { no distribute <src-level> into <dst-level> [ { route-map { <map-name> | <rtr_pol_name> } } | all ] } }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

distribute

Distribute routes between ISIS levels

src-level

Route-distribution between levels

dst-level

Route-distribution between levels

route-map

Route Map to constrain distribution

into

from level-n into level-m

map-name

A 'routing-rules' route-map name

rtr_pol_name

An existing routing-rules policy

all

Distribute all level-n routes
Command Mode
  • /exec/configure/router-isis/router-isis-vrf-common /exec/configure/router-isis/router-isis-af-common

dns

[no] dns { <WORD> } { name-server { <hostname> | <ip-address> } } { [ source-ip { <source-ip-hostname> | <source-ip-address> } ] | [ source-port <src-port> ] } +

Syntax Description

Syntax Description

no

(Optional)

source-ip

(Optional) source-port

src-port

(Optional)

dns

DNS Operation

WORD

Target IP Address or Hostname

name-server

Name Server

hostname

Destination hostname, broadcast disallowed

ip-address

Destination IP address, broadcast disallowed

source-ip-hostname

(Optional) source IP hostname, broadcast disallowed

source-ip-address

(Optional) source IP address, broadcast disallowed

source-port

(Optional) Source Port
Command Mode
  • /exec/configure/ip-sla

domain-id

domain-id { <id> | { type <dtype> value <dvalue> } | Null } | no domain-id [ <id> | { type <dtype> value <dvalue> } | Null ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

domain-id

OSPF domain-ID

id

OSPF domain ID in IP address format

type

OSPF domain ID type in Hex format

dtype

OSPF domain ID type in Hex format

value

OSPF domain ID ext. community value in Hex

dvalue

Null

Null Domain-ID
Command Mode
  • /exec/configure/router-ospf/vrf

domain-id secondary

domain-id { <id> | { type <dtype> value <dvalue> } | Null } secondary | no domain-id [ <id> | { type <dtype> value <dvalue> } | Null ] secondary

Syntax Description

Syntax Description

no

Negate a command or set its defaults

domain-id

OSPF domain-ID

id

OSPF domain ID in IP address format

type

OSPF domain ID type in Hex format

dtype

OSPF domain ID type in Hex format

value

OSPF domain ID ext. community value in Hex

dvalue

Null

Null Domain-ID

secondary

Secondary Domain-ID
Command Mode
  • /exec/configure/router-ospf/vrf

domain-tag

[no] domain-tag <as-number>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

domain-tag

Set OSPF process domain-tag

as-number

AS number
Command Mode
  • /exec/configure/router-ospf/vrf

dont-capability-negotiate

[ no | default ] dont-capability-negotiate

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

dont-capability-negotiate

Don't negotiate capability with this neighbor
Command Mode
  • /exec/configure/router-bgp/router-bgp-neighbor-sess

dos2nxos

dos2nxos <uri0>

Syntax Description

Syntax Description

dos2nxos

DOS to NXOS text file format converter

uri0

Filename to be displayed
Command Mode
  • /exec

dot1q

{ dot1q <dot1q-id> <intf-id> } | { no dot1q }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

dot1q

Encapsulation dot1q/bd

dot1q-id

Encapsulation dot1q/bd value

intf-id

Name of the interface for ngoam on which dot1q is configured
Command Mode
  • /exec/configure/configngoamprofile

dot1q

{ dot1q <vlan-id> [ cos <cos-val> ] } | { no dot1q }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

dot1q

specify flow profile to include dot1q tag

vlan-id

specify flow profile vlan-id

cos

(Optional) specify class of service

cos-val

(Optional) class of service value
Command Mode
  • /exec/configure/configngoamprofileflow

dot1q default dynamic

{ dot1q default dynamic } | { no dot1q default }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

dynamic

Dynamic Profile Map: Retrieve profile name from the external server

dot1q

Dot1Q Encapsulation

default

Default (wildcard). Match any dot1q when there is no specific dot1q mapping configured
Command Mode
  • /exec/configure/profile-map /exec/configure/profile-map-global

dot1x default

dot1x default

Syntax Description

Syntax Description

dot1x

dot1x configuration commands
Command Mode
  • /exec/configure

dot1x default

dot1x default

Syntax Description

Syntax Description

dot1x

dot1x configuration commands
Command Mode
  • /exec/configure/if-eth-base /exec/configure/if-ethernet-all

dot1x host-mode

dot1x host-mode <host_mode> | no dot1x host-mode

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

host-mode

role of 802.1x authenticating entity

host_mode

Host Mode
Command Mode
  • /exec/configure/if-eth-base /exec/configure/if-ethernet-all

dot1x mac-auth-bypass

dot1x mac-auth-bypass [ eap ] | no dot1x mac-auth-bypass

Syntax Description

Syntax Description

no

Negate a command or set its defaults

dot1x

dot1x configuration commands

mac-auth-bypass

Configure Mac-Auth-Bypass

eap

(Optional) EAP Authentication
Command Mode
  • /exec/configure/if-eth-base /exec/configure/if-ethernet-all

dot1x max-reauth-req

dot1x max-reauth-req <count> | no dot1x max-reauth-req

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

max-reauth-req

Maximum Re-authentication Attempts Before Failing

count

number of retries
Command Mode
  • /exec/configure/if-eth-base /exec/configure/if-ethernet-all

dot1x max-req

dot1x max-req <count> | no dot1x max-req

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

max-req

Maximum Retries to Initiate Authentication

count

number of retries
Command Mode
  • /exec/configure

dot1x max-req

dot1x max-req <count> | no dot1x max-req

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

max-req

Maximum Retries to Initiate Authentication

count

number of retries
Command Mode
  • /exec/configure/if-eth-base /exec/configure/if-ethernet-all

dot1x pae

[no] dot1x pae <pae-value>

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

pae

role of 802.1x authenticating entity

pae-value

role
Command Mode
  • /exec/configure/if-eth-base /exec/configure/if-ethernet-all

dot1x port-control

[no] dot1x port-control <port-control-value>

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

port-control

port control

port-control-value

set the port-control value
Command Mode
  • /exec/configure/if-eth-base /exec/configure/if-ethernet-all

dot1x radius-accounting

[no] dot1x radius-accounting

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

radius-accounting

accounting messages to RADIUS
Command Mode
  • /exec/configure

dot1x re-authenticate

{ dot1x re-authenticate } | { dot1x re-authenticate interface <if> }

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

re-authenticate

Manually re-authenticate an Interface

if

target interface
Command Mode
  • /exec

dot1x re-authentication

[no] dot1x re-authentication

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

re-authentication

Enable or Disable Reauthentication for this port
Command Mode
  • /exec/configure

dot1x re-authentication

[no] dot1x re-authentication

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

re-authentication

Enable or Disable Reauthentication for this port
Command Mode
  • /exec/configure/if-eth-base /exec/configure/if-ethernet-all

dot1x show credential

dot1x show credential <name>

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

credential

supplicant credential profile

name

profile name
Command Mode
  • /exec/configure/dot1x-cred

dot1x start supplicant interface

{ dot1x start supplicant interface <if> } | { dot1x start supplicant interface <if> credential <name> }

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

start

start 802.1x client

supplicant

802.1x supplicant

if

target interface

credential

credential profile name

name

name
Command Mode
  • /exec

dot1x stop supplicant interface

dot1x stop supplicant interface <if>

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

stop

stop 802.1x client

supplicant

802.1x supplicant

if

target interface
Command Mode
  • /exec

dot1x supplicant credential

[no] dot1x supplicant credential <name>

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

supplicant

802.1x supplicant

credential

credential profile name

name

name
Command Mode
  • /exec/configure/if-eth-base /exec/configure/if-ethernet-all

dot1x supplicant credential

[no] dot1x supplicant credential <name>

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

supplicant

802.1x supplicant

credential

supplicant credential profile
Command Mode
  • /exec/configure

dot1x supplicant default

dot1x supplicant default

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

supplicant

802.1x supplicant
Command Mode
  • /exec/configure/if-eth-base /exec/configure/if-ethernet-all

dot1x supplicant max-start

[no] dot1x supplicant max-start <count>

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

supplicant

802.1x supplicant

max-start

Maximum Start Requests

count

number
Command Mode
  • /exec/configure

dot1x supplicant max-start

[no] dot1x supplicant max-start <count>

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

supplicant

802.1x supplicant

max-start

Maximum Start Requests

count

number
Command Mode
  • /exec/configure/if-eth-base /exec/configure/if-ethernet-all

dot1x supplicant timeout auth-period

[no] dot1x supplicant timeout auth-period <value>

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

supplicant

802.1x supplicant

timeout

Various Timeouts

auth-period

waiting period for responses from authenticator

value

time interval in seconds
Command Mode
  • /exec/configure

dot1x supplicant timeout auth-period

[no] dot1x supplicant timeout auth-period <value>

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

supplicant

802.1x supplicant

timeout

Various Timeouts

auth-period

waiting period for responses from authenticator

value

time interval in seconds
Command Mode
  • /exec/configure/if-eth-base /exec/configure/if-ethernet-all

dot1x supplicant timeout held-period

[no] dot1x supplicant timeout held-period <value>

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

supplicant

802.1x supplicant

timeout

Various Timeouts

held-period

waiting period for retrying, after failed authentication

value

time interval in seconds
Command Mode
  • /exec/configure

dot1x supplicant timeout held-period

[no] dot1x supplicant timeout held-period <value>

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

supplicant

802.1x supplicant

timeout

Various Timeouts

held-period

waiting period for retrying, after failed authentication

value

time interval in seconds
Command Mode
  • /exec/configure/if-eth-base /exec/configure/if-ethernet-all

dot1x supplicant timeout start-period

[no] dot1x supplicant timeout start-period <value>

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

supplicant

802.1x supplicant

timeout

Various Timeouts

start-period

Interval Between Start Requests

value

time interval in seconds
Command Mode
  • /exec/configure

dot1x supplicant timeout start-period

[no] dot1x supplicant timeout start-period <value>

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

supplicant

802.1x supplicant

timeout

Various Timeouts

start-period

Interval Between Start Requests

value

time interval in seconds
Command Mode
  • /exec/configure/if-eth-base /exec/configure/if-ethernet-all

dot1x system-auth-control

[no] dot1x system-auth-control

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

system-auth-control

Enable or Disable SysAuthControl
Command Mode
  • /exec/configure

dot1x timeout quiet-period

dot1x timeout quiet-period <value> | no dot1x timeout quiet-period

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

timeout

Various Timeouts

quiet-period

Timeout For Retrying Authentication After Failed Authentication

value

time interval in seconds
Command Mode
  • /exec/configure

dot1x timeout quiet-period

dot1x timeout quiet-period <value> | no dot1x timeout quiet-period

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

timeout

Various Timeouts

quiet-period

Timeout For Retrying Authentication After Failed Authentication

value

time interval in seconds
Command Mode
  • /exec/configure/if-eth-base /exec/configure/if-ethernet-all

dot1x timeout ratelimit-period

dot1x timeout ratelimit-period <value> | no dot1x timeout ratelimit-period

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

timeout

Various Timeouts

ratelimit-period

Rate Limit period for EAPOL-Start

value

time interval in seconds
Command Mode
  • /exec/configure/if-eth-base /exec/configure/if-ethernet-all

dot1x timeout re-authperiod

dot1x timeout re-authperiod <value> | no dot1x timeout re-authperiod

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

timeout

Various Timeouts

re-authperiod

Timeout For Re-Authentication

value

time interval in seconds
Command Mode
  • /exec/configure

dot1x timeout re-authperiod

dot1x timeout re-authperiod <value> | no dot1x timeout re-authperiod

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

timeout

Various Timeouts

re-authperiod

Timeout For Re-Authentication

value

time interval in seconds
Command Mode
  • /exec/configure/if-eth-base /exec/configure/if-ethernet-all

dot1x timeout server-timeout

dot1x timeout server-timeout <value> | no dot1x timeout server-timeout

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

timeout

Various Timeouts

server-timeout

Timeout for Radius Retries

value

time interval in seconds
Command Mode
  • /exec/configure/if-eth-base /exec/configure/if-ethernet-all

dot1x timeout supp-timeout

dot1x timeout supp-timeout <value> | no dot1x timeout supp-timeout

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

timeout

Various Timeouts

supp-timeout

Timeout for Supplicant retries

value

time interval in seconds
Command Mode
  • /exec/configure/if-eth-base /exec/configure/if-ethernet-all

dot1x timeout tx-period

dot1x timeout tx-period <value> | no dot1x timeout tx-period

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

timeout

Various Timeouts

tx-period

Timeout For Resending Requests To Supplicant

value

time interval in seconds
Command Mode
  • /exec/configure

dot1x timeout tx-period

dot1x timeout tx-period <value> | no dot1x timeout tx-period

Syntax Description

Syntax Description

dot1x

dot1x configuration commands

timeout

Various Timeouts

tx-period

Timeout For Resending Requests To Supplicant

value

time interval in seconds
Command Mode
  • /exec/configure/if-eth-base /exec/configure/if-ethernet-all

down-bit-ignore

{ down-bit-ignore } | { no down-bit-ignore }

Syntax Description

Syntax Description

no

Negate a command or set its defaults

down-bit-ignore

Configure a PE router to ignore the DN bit for network summary, external and NSSA external LSA
Command Mode
  • /exec/configure/router-ospf/vrf

downlink delay

downlink delay <ena-dis-flg> [ timeout <time-out> ] | no downlink delay

Syntax Description

Syntax Description

no

Negate a command or set its defaults

downlink

Change downlink linkup time

delay

delay bringup of downlinks

ena-dis-flg

Enable/Disable downlink delay feature

timeout

(Optional) downlink ports enable delay in seconds

time-out

(Optional) Time out
Command Mode
  • /exec/configure

dpp set-qos-group

[no] dpp set-qos-group <qos-group>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

dpp

Dynamic Packet Prioritization

set-qos-group

QoS group to be mapped

qos-group

QoS Group Value
Command Mode
  • /exec/configure/policy-map/type/uf/class

dscp

{ [ no ] dscp <dscp> | no dscp }

Syntax Description

Syntax Description

dscp

Optional DSCP

dscp

Differentiated services codepoint value
Command Mode
  • /exec/configure/nfm-exporter

dst-grp

[no] dst-grp <d-grp-id>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

dst-grp

Associated destination group
Command Mode
  • /exec/configure/telemetry/subscription

dual-active exclude interface-vlan

dual-active exclude interface-vlan <allow-vlans> | no dual-active exclude interface-vlan

Syntax Description

Syntax Description

no

Negate a command or set its defaults

dual-active

Configuration when peer link is down but peer is alive

interface-vlan

Interface vlan configuration

exclude

Interface vlans to exclude from suspension when dual-active

allow-vlans

Set allowed interface vlans
Command Mode
  • /exec/configure/vpc-domain

dual-stage translate xml

dual-stage translate <dn> { xml | json } <in_file> <out_file> [ exec-python ] [ delete-files ]

Syntax Description

Syntax Description

dual-stage

Related to 2 stage commit

translate

Convert from external restful format to internal JSON

xml

Input file has XML

json

Input file has JSON

dn

DN param

in_file

Input file name

out_file

Output file name

exec-python

(Optional) Execute python script after translation

delete-files

(Optional) Delete input and output files after translation
Command Mode
  • /exec

duplex

duplex <duplex_mode> | no duplex [ <duplex_mode> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

duplex

Enter the port duplex mode

duplex_mode

Interface duplex mode
Command Mode
  • /exec/configure/if-ethernet-all /exec/configure/if-eth-non-member /exec/configure/if-port-channel

duplex

duplex <duplex_mode> | no duplex [ <duplex_mode> ]

Syntax Description

Syntax Description

no

Negate a command or set its defaults

duplex

Enter the port duplex mode

duplex_mode

Interface duplex mode
Command Mode
  • /exec/configure/if-mgmt-ether

duplicate-message throttle

[no] duplicate-message throttle

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

duplicate-message

Configure throttling of duplicate callhome alert messages

throttle

Enable throttling of duplicate callhome alert messages
Command Mode
  • /exec/configure/callhome

dynamic-capability

[ no | default ] dynamic-capability

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

dynamic-capability

Dynamic capability
Command Mode
  • /exec/configure/router-bgp/router-bgp-neighbor-sess

dynamic-med-interval

[no] dynamic-med-interval <sec>

Syntax Description

Syntax Description

no

(Optional) Negate a command or set its defaults

dynamic-med-interval

Sets the interval for dampening of med changes

sec

Time interval in seconds
Command Mode
  • /exec/configure/router-bgp