New Commands
The following commands are added in this release.
-
debug l2fm clear peer_sync_db [ [ counters ] | [ [ force-flush ] [ address <mac-addr> | interface <interface-name> | peer-ip <peerip> ] [ vlan <vlan-id> ] ] ]
-
[ no ] feature hw_telemetry
-
[ no ] hardware qos dynamic-buffer-sharing
-
[ no ] ip arp evpn timeout <time-out>
-
[ no ] { ip | ipv4 } routing multicast mfdm-buffer-route-count { <size> }
-
[ no ] link rxlos [ algo <algo_val> ]
-
[ no ] link transmit reset-skip
-
lldp dcbx version auto
-
[ no ] lldp dcbx version { cee | ieee }
-
[ no ] macsec shutdown
-
[ no ] port-type <type>
-
[ no ] power inline default_consumption <wattage>
-
[ no ] priority-flow-control watch-dog forced { on | off }
-
[ no ] ptp correction hardware
-
[ no ] system mode maintenance maint-delay <delay-value>
-
test l2fm peer_sync_db { { enable | disable } [ auto-recovery ] | { activate | deactivate } | { add-mac address <mac-addr> vlan <vlan-id> { interface <interface-name> | peer-ip <peerip> } } }
-
[ no ] ttag-strip