Cisco Nexus 9000 Series NX-OS iCAM Configuration Guide, Release 7.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: December 17, 2017

New and Changed Information

This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 9000 Series NX-OS iCAM Configuration Guide, Release 7.x..

New and Changed Information

This table summarizes the new and changed features for the Cisco Nexus 9000 Series NX-OS iCAM Configuration Guide and where they are documented.

Table 1. New and Changed Features
Feature	Description	Changed in Release	Where Documented
iCAM health monitoring and ITD support	iCAM now provides the following health monitoring data: Data on device health Data on ITD service	7.0(3)I7(6)	About Health Monitoring and ITD Support
show icam resource and show icam prediction resource commands	Updated show icam resource and show icam prediction resource commands with `fib_tcam` and `l2_table` parameters.	NX-OS 7.0(3)I7(2)	Displaying Current, Historical, and Predictive TCAM Resource per Feature
iCAM	Introduced this feature.	7.0(3)I6(1)	Cisco Nexus 9000 Series NX-OS iCAM Configuration Guide

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)