The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter describes how to configure the Cisco Remote Integrated Services Engine (RISE) with a Cisco Prime Network Analysis Module (NAM) appliance and Cisco Nexus 7000 Series switches. The Cisco NX-OS software supports the Cisco Nexus 7000 Series switches, which includes the Cisco Nexus 7000 Series switches and Cisco Nexus 7700 Series switches.
This chapter includes the following sections:
Your software release might not support all the features documented in this module. For the latest caveats and feature information, see the Bug Search Tool at https://tools.cisco.com/bugsearch/ and the release notes for your software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the “New and Changed Information” chapter or the Feature History table below.
This section includes the following topics:
The key features of a RISE integration are as follows:
A Cisco Prime Network Analysis Module (NAM) offers multi-dimensional perspective into the network to help identify applications running on the network, how are they performing, and which ones are consuming the most network resources. When there is a performance concern, the Cisco Prime NAM can help you to quickly isolate the source and analyze the root cause at a packet level.
The only physical topology supported for RISE with NAM is a single Rise control link between the Cisco Prime NAM and the Cisco Nexus 7000 switch.
SPAN traffic between the switch and the appliance is sent through the data link, which is separate from the management link.
The Cisco Nexus Series switches are used purely as a 1 and 10-Gigabit Ethernet switch, consolidating 10 Gigabit Ethernet connections into a smaller number of server connections trunked to the aggregation layers. These switches are designed for deployment in the core, aggregation, or access layers of a high performance, hierarchical data center network topology.
The Cisco Nexus Series switches run on the Cisco NX-OS software. This software fulfills the routing, switching, and storage networking requirements of data centers and provides an Extensible Markup Language (XML) interface and a command-line interface (CLI) that is similar to Cisco IOS software. As a crucial element in data center I/O consolidation, the switch enables I/O consolidation at the access layer and provides interoperability with the Cisco Nexus Series switches and other standards-based products.
Two types of VDC topologies are supported for Cisco Remote Integrated Services Engine (Rise) with Cisco Prime Network Analysis Module (NAM) and Cisco Nexus 7000 Series switches. The Cisco Prime NAM can monitor any virtual device context (VDC) without requiring you to recable the devices.
![]() Note | All features in this section function with IPv4. |
This section includes the following topics:
The discovery and bootstrap functionality enables the Cisco Nexus Series switches to communicate with the appliance by exchanging information to set up the Remote Integrated Service Engine (RISE) channel, which transmits control and data packets. Auto-discovery is supported only when you directly connect the service appliance with the Cisco Nexus switch. Once you configure the RISE control channel on the switch, the connected service appliance is set to RISE mode and all of its ports are set to operational mode by default.
In indirect mode (when the appliance is either Layer 2 or Layer 3 adjacent to the switch), you must manually configure the appliance and the Cisco Nexus switches to establish the control channel connectivity and for discovery and bootstrap to occur.
For more information about connection modes, see the “Preparing for RISE Integration” chapter. For configuration information, see the “Configuring RISE” chapter.
A RISE-enabled appliance can use its health monitoring feature to track and support server health by sending out health probes to verify server responses.
The Cisco Nexus switch and the appliance also periodically send heartbeat packets to each other. If a critical error occurs and health monitoring detects a service instance failure, or if the heartbeat is missed six times successively, the RISE channel becomes nonoperational. The health monitoring timer is 30 seconds (sec).
The nondisruptive maintenance feature of the Cisco Remote Integration Services Engine (RISE) maintains the RISE configuration and runtime information on the Cisco Nexus Series switches during maintenance processes, such as an in-service software upgrade (ISSU) or an in-service software downgrade (ISSD), instead of being purged.
During an in-service software upgrade (ISSU), all RISE control channel communications are disabled. The configuration state across all components is restored after the ISSU is completed. Data traffic is not affected during an ISSU.
During an in-service software downgrade (ISSD), when you are downgrading from a Cisco Nexus Series switch software image with RISE support to an image without RISE support, you are notified that you should enter the no feature rise command before proceeding with the downgrade. This removes all of the RISE configuration and runtime configuration from the switch.
In Cisco NX-OS iPLUS Release 7.1(1)N1(1) and later releases, the Cisco Nexus Series switch provides start and stop notifications to the RISE service appliance during an in-service software upgrade (ISSU) or downgrade. This notification includes the hitful and hitless status of the line card to which the appliance is connected.
When the RISE service appliance receives a start notification, the appliance stops all control plane communication with the switch until after the switch sends a stop notification. The appliance uses the hitful and hitless status in the start and stop notifications to determine whether the data plane is operational.
Product | License Requirements |
---|---|
Cisco NX-OS |
The Cisco Remote Integrated Services Engine (RISE) with Cisco Prime Network Analysis Module (NAM) requires the Enhanced Layer 2 Package on the Cisco Nexus 7000 Series switch. For a complete explanation of the Cisco NX-OS licensing scheme and how to obtain and apply licenses, see the Cisco NX-OS Licensing Guide. For a complete explanation of the Cisco NX-OS licensing scheme, see the Cisco NX-OS Licensing Guide |
The RISE feature has the following prerequisite:
Cable and power up the Cisco Prime Network Analysis Module (NAM). See the “Preparing for RISE Integration” chapter for information on connecting the service appliance.
The interface and the location of a dataport for the Cisco Prime NAM must be preconfigured. Create an ethernet or port channel on the Cisco Nexus switch and add all relevant management and data VLANs for the service appliance. The port that is configured for the ethernet or port channel must be in access mode. See the Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide for information on creating port channels.
Cisco RISE with a Cisco Prime Network Analysis Module (NAM) and Cisco Nexus 7000 Series switches has the following guidelines and limitations:
Cisco Rise with Cisco Prime NAM supports direct connect mode only.
In a Cisco RISE with Cisco Prime NAM deployment, VLANs cannot be shared across virtual device contexts (VDCs) even though the Cisco Nexus switch configuration allows it.
Only Cisco Prime NAM 6.02 or later releases are supported.
In Cisco NX-OS Release 6.2.8, only a single NAM data port can be defined in the RISE service.
The IP address for NAM management or default gateway can only be changed when NAM displays all RISE connections as "offline". The NAM will have no active RISE connections for a period of 60 second while moving from "online" to "offline" state. For the changes to take effect immediately without the need to wait for the 60 second time period, you can disable the RISE feature through the NAM CLI and enable it again. This limitation is applicable only for NAM appliances which are already running with RISE connection for which the user might wish to change the IP or gateway address.
Parameter | Default |
---|---|
RISE mode |
Disabled |
CoPP |
CoPP policies for RISE ports 8000 and 8001 are enabled by default. |
This chapter describes how to configure the Cisco Remote Integrated Service Engine (RISE) on the Cisco Nexus 7000 Series switches and the Cisco Prime Network Analysis Module (NAM) appliance. The Cisco NX-OS software supports the Cisco Nexus 7000 Series switches, which includes the Cisco Nexus 7000 Series switches and Cisco Nexus 7700 Series switches.
This chapter includes the following sections:
In a direct mode deployment, the service appliance, such as Cisco Prime NAM appliance, is attached to a single Nexus 7000 Series switch.
![]() Note | This task describes how to configure a Cisco Nexus switch in a direct mode deployment. After configuring the Cisco Remote Integrated Services Engine (RISE) on the Cisco Nexus 7000 Series switch, the appliance that is directly connected to the standalone switch is automatically configured for RISE mode and all of its ports are in operation mode. No configuration is required on the appliance in a direct mode deployment. |
To enable auto-discovery of the appliance by the switches, use the no shutdown command to ensure that the physical ports are up by default.
Interconnect the ports on the appliance with the standalone or port channel of the switch.
Ensure that all of the switch ports to which the appliance is connected are dedicated to the appliance.
Make sure that you are in the correct VDC on the Cisco Nexus switch. To switch VDCs, use the switchto vdc command.
1. switch# configure terminal
2. switch(config)# feature rise
3. switch(config)# [no] service type rise name service-name mode [direct]
4. switch(config-rise)# vlan vlan-id
5. switch(config-rise)# ip ip-address netmask
6. switch(config-rise)# data [ethernet slot/port | port-channel channel-number]
7. switch(config-rise)# no shutdown
8. (Optional) switch(config-rise)# show module service
To display the RISE configuration on the Cisco Nexus 7000 Series switch, perform one of the following tasks.
Command | Purpose |
---|---|
show module service |
Displays the status of the RISE service module on the Cisco Nexus 7000 Series switch. |
show rise [detail] |
Displays the RISE configuration status on the Cisco Nexus 7000 Series switch. |
show running-config services |
Displays the RISE running configuration on the Cisco Nexus 7000 Series switch. |
show tech-support services [detail] |
Displays troubleshooting information for RISE on the Cisco Nexus 7000 Series switch. |
The following example is sample output from the show module service command:
switch(config-rise)# show module service Mod Ports Module-Type Model Name Status --- ----- ----------------------------------- ------------------ ------------ ---------- 336 0 NetScaler Virtual Appliance NetScaler vpx05 ok 337 2 NSMPX-17550 12*CPU+2*E1K+8*IX+36*CV NetScaler mpx24 ok 338 0 NetScaler Virtual Appliance NetScaler vpx15 ok 339 0 NetScaler Virtual Appliance NetScaler vpx14 ok 340 2 NSMPX-17550 12*CPU+2*E1K+8*IX+36*CV NetScaler mpx25 ok Mod Sw Serial-Num --- -------------------------------- -------------------------------- 336 NetScaler NS10.1: Build 124.1308 HE2H81UJ47 337 NetScaler NS10.1: Build 124.1308 MJZ002A3CG 338 NetScaler NS10.1: Build 124.1308 HE2H81UJ47 339 NetScaler NS10.1: Build 124.1308 HE2H81UJ47 340 NetScaler NS10.1: Build 124.1308 MMNS22A3EX
Related Topic | Document Title |
---|---|
Commands on the Cisco Nexus 7000 Series switch |
Cisco Nexus 7000 Series NX-OS Fundamentals Configuration Guide |
Install and reference information for Cisco Prime NAM |
Cisco NAM 2000 Series Appliances at http://www.cisco.com/c/en/us/support/cloud-systems-management/nam-2000-series-appliances/tsd-products-support-series-home.html |
Interfaces and vPCs |
Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide |
The following table lists the feature history for this feature.
Feature Name | Release | Feature Information |
---|---|---|
Cisco RISE with Cisco Prime NAM |
Cisco NX-OS Release 6.2(8) |
This feature was introduced on the Cisco Nexus 7000 Series switch. |
Cisco NAM 6.1.1 |
This feature was introduced on the Cisco Prime Network Analysis Module (NAM). |