Cisco Virtual Security Gateway for Microsoft Hyper-V Command Reference, Release 5.2(1)VSG2(1.1a)

show aaa
show ac-driver
show accounting
show banner
show boot
show cdp
show cli
show clock
show copyright
show cores
show debug
show debug-filter
show event-log
show event manager internal
show feature
show file
show hardware
show hostname
show hosts
show http-server
show incompatibility
show inspect ftp statistics
show install all
show interface
show ip
show ipv6
show kernel internal
show line
show logging
show ntp
show password
show policy-engine
show processes
show redundancy status
show resource
show role
show running-config
show service-path connection
show service-path statistics
show snmp
show sockets
show ssh
show startup-config
show system
show tech-support
show telnet server
show terminal
show user-account
show users
show version
show nsc-pa
show vsg dvport
show vsg ip-binding
show vsg security-profile
show vsg vm
show vsg vm name
show vsg vm uuid
show vsg zone
show xml server

Cisco Virtual Security Gateway Show Commands

This chapter provides information about Cisco Virtual Security Gateway (VSG) show commands.

show aaa

To display information about authentication, authorization, and accounting (AAA), use the show aaa command.

show aaa [accounting | authentication | authorization | groups | users]

Syntax Description


accounting	(Optional) Displays the accounting configuration.
authentication	(Optional) Displays the authentication configuration.
authorization	(Optional) Displays the authorization configuration.
groups	(Optional) Displays configured groups.
users	(Optional) Displays remotely authenticated users.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show aaa command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display the AAA configuration:

vsg# show aaa authentication

         default: local

         console: local

Related Commands


Command	Description
password	Configures the password.

show ac-driver

To display application container statistics, use the show ac-driver command.

show ac-driver statistics

Syntax Description


statistics	Displays application container statistics.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show ac-driver command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display application container statistics:

vsg# show ac-driver statistics

#Packet Statistics:

Rcvd Total                         5510  Buffers in Use                   3188

  Rcvd vPath L2 Pkts               1140  Rcvd vPath IPV4 Pkts                0

  Rcvd VPath Pkts                  1140  Sent to VPath                    1140

  Sent to Service-Path             1140  Sent to Control-Path             4370

  All Drops                           0

  Non-vPath LLC                       0  Non-vPath OUI                       0

  Non-vPath type L2                   0

  Non-vPath IPV4                      0  Non-vPath IPV4 UDP                  0

 Service-Path not Inited              0  Service-Path Down                   0

  Rcvd Bad Descriptor                 0  Send to Service-Path Err            0

  Packet Offset Err                   0  Send Bad Descriptor                 0

  Send NIC Err                        0

Related Commands


Command	Description
show vsg	Displays information about a Cisco VSG.

show accounting

To display the accounting log, use the show accounting command.

show accounting log [start-time year month day time end-time year month day time]

Syntax Description


log	Displays the accounting log.
start-time	(Optional) Displays the date in the log the display will start.
year month day time	(Optional) Year, day and time. The range for year is from 1970 to 2030, and is in YYYY format. The values for month are Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, or Dec. The range for day is from 1 to 31, and is in dd format. time is in HH:MM:SS.
end-time	(Optional) Displays the date in the log the display will end.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show accounting command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

When you enter a show command that displays a long list of data, you can press Ctrl-C at any time to exit that list.

Examples

This example shows how to display the accounting log:

vsg# show accounting log

Fri Jan 21 17:19:35 2013:update:171.69.17.61@pts/0:admin:dir (SUCCESS)

Fri Jan 21 17:23:36 2013:update:10.193.73.130@ssh.3115:vsnbetauser:test vnsp sp1

 1 (SUCCESS)

Fri Jan 21 17:24:04 2013:update:10.193.73.130@ssh.3120:vsnbetauser:test vnsp sp1

 1 (SUCCESS)

Mon Jan 24 12:50:23 2013:start:171.70.216.167@pts/1:admin:

Mon Jan 24 12:52:59 2013:update:171.70.216.167@pts/1:admin:configure (SUCCESS)

Mon Jan 24 12:55:46 2013:stop:171.70.216.167@pts/1:admin:shell terminated gracef

ully

Wed Feb  2 13:56:54 2013:start:171.70.225.85@pts/2:admin:

Wed Feb  2 14:20:41 2013:stop:171.70.225.85@pts/2:admin:shell terminated because

 of telnet closed

Wed Feb  2 14:32:19 2013:start:171.70.225.85@pts/3:admin:

Wed Feb  2 14:39:48 2013:stop:171.70.225.85@pts/3:admin:shell terminated because

 of telnet closed

Fri Feb  4 12:16:43 2013:start:171.71.29.84@pts/4:admin:

Fri Feb  4 12:17:11 2013:update:171.71.29.84@pts/4:admin:configure (SUCCESS)

Fri Feb  4 12:18:22 2013:update:171.71.29.84@pts/4:admin:configure terminal ; vn

m-policy-agent (SUCCESS)

Fri Feb  4 12:20:41 2013:stop:171.71.29.84@pts/4:admin:shell terminated because

of telnet closed

Fri Feb  4 14:22:18 2013:start:171.71.29.84@pts/5:admin:

Fri Feb  4 14:23:05 2013:update:171.71.29.84@pts/5:admin:configure (SUCCESS)

Fri Feb  4 15:33:06 2013:stop:171.71.29.84@pts/5:admin:shell terminated because

of telnet closed

Fri Feb  4 17:05:05 2013:start:171.71.29.84@pts/6:admin:

Fri Feb  4 18:25:32 2013:stop:171.71.29.84@pts/6:admin:shell terminated because

of telnet closed

Mon Feb  7 14:12:19 2013:start:171.71.29.84@pts/7:admin:

Mon Feb  7 15:51:10 2013:stop:171.71.29.84@pts/7:admin:shell terminated because

of telnet closed

Mon Feb  7 16:30:10 2013:start:171.71.29.84@pts/8:admin:

Mon Feb  7 19:11:13 2013:stop:171.71.29.84@pts/8:admin:shell terminated because

of telnet closed

Wed Feb  9 14:43:26 2013:start:10.21.84.66@pts/9:admin:

Wed Feb  9 17:43:30 2013:stop:10.21.84.66@pts/9:admin:shell terminated because o

f telnet closed

Wed Feb  9 18:13:10 2013:start:10.21.84.66@pts/10:admin:

Wed Feb  9 18:40:00 2013:update:10.21.84.66@pts/10:admin:configure (SUCCESS)

Wed Feb  9 19:50:37 2013:start:10.21.84.66@pts/11:admin:

Wed Feb  9 20:49:00 2013:stop:10.21.84.66@pts/10:admin:shell terminated because

of telnet closed

Wed Feb  9 22:03:36 2013:stop:10.21.84.66@pts/11:admin:shell terminated because

of telnet closed

Thu Feb 10 18:41:45 2013:start:171.71.29.84@pts/12:admin:

Thu Feb 10 18:50:50 2013:stop:171.71.29.84@pts/12:admin:shell terminated because

 of telnet closed

Fri Feb 11 12:09:57 2013:start:171.71.29.84@pts/13:admin:

Fri Feb 11 16:55:21 2013:stop:171.71.29.84@pts/13:admin:shell terminated because

 of telnet closed

Fri Feb 11 18:19:49 2013:start:171.71.29.84@pts/14:admin:

Fri Feb 11 18:55:54 2013:stop:171.71.29.84@pts/14:admin:shell terminated because

 of telnet closed

Mon Feb 14 13:35:27 2013:start:171.71.29.84@pts/15:admin:

Related Commands


Command	Description
show logging	Displays the logging configuration and the contents of the log file.

show banner

To display the banner, use the show banner command.

show banner motd

Syntax Description


motd	Displays the message of the day.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show banner command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display the banner:

vsg# show banner motd

Nexus 1000V VSG

Related Commands


Command	Description
banner	Creates a banner message.

show boot

To display boot variables, use the show boot command.

Syntax Description


auto-copy	(Optional) Displays whether auto copy is enabled or disabled.
current	(Optional) Displays whether the current boot variable is enabled or disabled.
module	(Optional) Displays the boot variables for a specific module or all modules.
sup-1	(Optional) Displays the current and next load boot variables for supervisor 1.
sup-2	(Optional) Displays the current and next load boot variables for supervisor 2.
variables	(Optional) Displays a list of boot variables.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show boot command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display boot variables:

vsg# show boot

Current Boot Variables:

sup-1

kickstart variable = bootflash:/ks.bin

system variable = bootflash:/sys.bin

sup-2

kickstart variable = bootflash:/ks.bin

system variable = bootflash:/sys.bin

No module boot variable set

Boot Variables on next reload:

sup-1

kickstart variable = bootflash:/ks.bin

system variable = bootflash:/sys.bin

sup-2

kickstart variable = bootflash:/ks.bin

system variable = bootflash:/sys.bin

No module boot variable set

Related Commands


Command	Description
boot	Creates boot variables.

show cdp

To display Cisco Discovery Protocol (CDP) information, use the show cdp command.

show cdp {all | entry | global | interface | internal | neighbors | traffic}

Syntax Description


all	Displays all interfaces in the CDP database.
entry	Displays CDP entries in the CDP database.
global	Displays global CDP information.
interface	Displays CDP information for an interface.
internal	Displays private memory statistics for the UUID.
neighbors	Displays CDP neighbors.
traffic	Displays CDP traffic statistics.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show cdp command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

When you enter a show command that displays a long list of data, you can press Ctrl-C at any time to exit that list.

Examples

This example shows how to display all interfaces in the CDP database:

vsg# show cdp all

Interface Index :83886080

Interface mgmt0:

    Operational status: up

    Config status: enabled

    Refresh time: 60

    Hold time: 180

Interface Index :117440512

Interface data0:

    Operational status: up

    Config status: enabled

    Refresh time: 60

    Hold time: 180

Related Commands


Command	Description
cdp	Configures CDP parameters.

show cli

To display command-line interface (CLI) information, use the show cli command.

show cli {alias | dynamic | history | interface | internal | list | syntax | variables}

Syntax Description


alias	Displays the CLI alias.
dynamic	Display the current range of dynamic parameters.
history	Displays the CLI command history.
interface	Displays the CLI interface table.
internal	Displays the CLI statistics.
list	Displays the CLI command syntax.
syntax	Displays the Extended Backus-Naur Form (EBNF) syntax of all commands.
variables	Displays the CLI variables.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show cli command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

When you enter a show command that displays a long list of data, you can press Ctrl-C at any time to exit that list.

Examples

This example shows how to display CLI variables:

vsg# show cli variables

VSH Variable List

-----------------

SWITCHNAME="vsg"

TIMESTAMP="2013-02-14-17.33.37"

Related Commands


Command	Description
cli var	Defines CLI variables.

show clock

To display the clock, use the show clock command.

show clock [detail]

Syntax Description


detail	(Optional) Displays the day, the time, and the year.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show clock command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display the clock:

vsg# show clock detail

Mon Feb 14 17:47:44 UTC 2013

Related Commands


Command	Description
clock	Manages the system clock.

show copyright

To display copyright information, use the show copyright command.

show copyright

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show copyright command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display copyright information:

vsg# show copyright

Cisco Nexus Operating System (NX-OS) Software

TAC support: http://www.cisco.com/tac

Copyright (c) 2002-2013, Cisco Systems, Inc. All rights reserved.

The copyrights to certain works contained in this software are

owned by other third parties and used and distributed under

license. Certain components of this software are licensed under

the GNU General Public License (GPL) version 2.0 or the GNU

Lesser General Public License (LGPL) Version 2.1. A copy of each

such license is available at

http://www.opensource.org/licenses/gpl-2.0.php and

http://www.opensource.org/licenses/lgpl-2.1.php

Related Commands


Command	Description
show version build-info	Displays build information.

show cores

To display all core dumps, use the show cores command.

show cores

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show cores command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

When you enter a show command that displays a long list of data, you can press Ctrl-C at any time to exit that list.

Examples

This example shows how to display all core dumps:

vsg# show cores

Related Commands


Command	Description
show event-log	Displays the event log.

show debug

To show debug flags, use the show debug command.

Syntax Description


aaa	(Optional) Displays AAA debugging flags.
arp	(Optional) Displays ARP debugging flags.
ascii-cfg	(Optional) Displays ASCII-CFG debugging flags.
bootvar	(Optional) Displays boot variables debugging flags.
capability	(Optional) Displays capability debugging flags.
cdp	(Optional) Displays CDP debugging flags.
confcheck	(Optional) Displays all debugging flags of confcheck.
core	(Optional) Displays core daemon debugging flags.
evmc	(Optional) Displays EVMC debugging flags.
evms	(Optional) Displays EVMS debugging flags.
fm	(Optional) Displays feature manager debugging flags.
fs-daemon	(Optional) Displays FS daemon debugging flags.
im	(Optional) Displays IM debugging flags.
ip	(Optional) Displays IP information.
ipv6	(Optional) Displays IPv6 information.
kadb	(Optional) Displays kernel ADB debugging flags.
klm-rwsem	(Optional) Displays RWSEM driver debugging flags.
logfile	(Optional) Displays the log file.
module	(Optional) Displays module debugging flags.
msp	(Optional) Displays MSP debugging flags.
mvsh	(Optional) Displays MVSH debugging flags.
nsc-pa	(Optional) Displays NSC PA debugging flags.
nsmgr	(Optional) Displays NSMGR debugging flags.
ntp	(Optional) Displays NTP debugging flags.
platform	(Optional) Displays platform manager debugging flags.
plugin	(Optional) Displays plugin debugging flags.
redun-mgr	(Optional) Debug redundancy manager.
redundancy	(Optional) Displays redundancy driver debugging flags.
res_mgr	(Optional) Displays resource manager debugging flags.
sal	(Optional) Displays SAL debugging flags.
scheduler	(Optional) Displays scheduler debugging flags.
security	(Optional) Displays security debugging flags.
snmp	(Optional) Displays SNMP server debugging flags.
system	(Optional) Displays system debugging flags.
tcap	(Optional) Displays exception logger debugging flags.
ttyd	(Optional) Displays TTYD debugging flags.
vdc	(Optional) Displays VDC manager debugging flags.
vmm	(Optional) Displays VMM debugging flags.
vsh	(Optional) Displays VSH debugging flags.
vshd	(Optional) Displays VSHD debugging flags.
xml	(Optional) Displays XML debugging flags.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show debug command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

When you enter a show command that displays a long list of data, you can press Ctrl-C at any time to exit that list.

Examples

This example shows how to display AAA debug flags:

vsg# show debug aaa

Related Commands


Command	Description
show debug-filter	Displays debugging filters.

show debug-filter

To display debug filters, use the show debug-filter command.

show debug-filter {all | arp | ipv6}

Syntax Description


all	Displays all debugs filters.
arp	Displays Address Resolution Protocol (ARP) debug filters.
ipv6	Displays IPv6 information.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show debug-filter command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

When you enter a show command that displays a long list of data, you can press Ctrl-C at any time to exit that list.

Examples

This example shows how to display debug filters:

vsg# show debug-filter all

Related Commands


Command	Description
show debug	Displays debugging flags.

show event-log

To display the event log, use the show event-log command.

show event-log all

Syntax Description


all	Displays the event log.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show event-log command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

When you enter a show command that displays a long list of data, you can press Ctrl-C at any time to exit that list.

Examples

This example shows how to display the event log:

vsg# show event-log all

Related Commands


Command	Description
show event manager internal	Displays the event manager.

show event manager internal

To display event manager events, use the show event manager internal command.

show event manager internal [clients | evmc | evms | mvsh]

Syntax Description


clients	(Optional) Display information about clients registered with EEM system.
evmc	(Optional) Displays Event Manager Client commands.
evms	(Optional) Displays Event Manager Server commands.
mvsh	(Optional) Displays memory allocation statistics.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show event manager command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

When you enter a show command that displays a long list of data, you can press Ctrl-C at any time to exit that list.

Examples

This example shows how to display event manager errors:

vsg# show event manager internal evmc errors

1) Event:E_DEBUG, length:253, at 232142 usecs after Wed Feb 16 15:20:07 2013

  [100] fu_sdb_handle_update: validation fail,                         
  fu_is_state_active = 1,                         
  fu_is_sync_pss_to_standby_enabled = 0,

  mts_sync_event_get(mts_msg) = 0,

  create_del) = 0

2) Event:E_DEBUG, length:43, at 232138 usecs after Wed Feb 16 15:20:07 2013

    [100] fu_sdb_handle_update: validation fail

3) Event:E_DEBUG, length:55, at 232136 usecs after Wed Feb 16 15:20:07 2013

    [100] fu_sync_pss_to_standby_apply:Set of checks failed

4) Event:E_DEBUG, length:58, at 971337 usecs after Wed Feb 16 15:20:02 2013

    [100] fu_sync_pss_to_standby_apply:Input event not MTS msg

5) Event:E_DEBUG, length:58, at 971525 usecs after Wed Feb 16 15:19:57 2013

    [100] fu_sync_pss_to_standby_apply:Input event not MTS msg

6) Event:E_DEBUG, length:58, at 971719 usecs after Wed Feb 16 15:19:52 2013

    [100] fu_sync_pss_to_standby_apply:Input event not MTS msg

7) Event:E_DEBUG, length:58, at 971918 usecs after Wed Feb 16 15:19:47 2013

    [100] fu_sync_pss_to_standby_apply:Input event not MTS msg

8) Event:E_DEBUG, length:58, at 971103 usecs after Wed Feb 16 15:19:42 2013

    [100] fu_sync_pss_to_standby_apply:Input event not MTS msg

9) Event:E_DEBUG, length:58, at 971307 usecs after Wed Feb 16 15:19:37 2013

    [100] fu_sync_pss_to_standby_apply:Input event not MTS msg

10) Event:E_DEBUG, length:58, at 971524 usecs after Wed Feb 16 15:19:32 2013

    [100] fu_sync_pss_to_standby_apply:Input event not MTS msg

11) Event:E_DEBUG, length:58, at 971693 usecs after Wed Feb 16 15:19:27 2013

    [100] fu_sync_pss_to_standby_apply:Input event not MTS msg

12) Event:E_DEBUG, length:58, at 971886 usecs after Wed Feb 16 15:19:22 2013

    [100] fu_sync_pss_to_standby_apply:Input event not MTS msg

13) Event:E_DEBUG, length:58, at 971094 usecs after Wed Feb 16 15:19:17 2013

    [100] fu_sync_pss_to_standby_apply:Input event not MTS msg

14) Event:E_DEBUG, length:58, at 971275 usecs after Wed Feb 16 15:19:12 2013

    [100] fu_sync_pss_to_standby_apply:Input event not MTS msg

15) Event:E_DEBUG, length:58, at 971494 usecs after Wed Feb 16 15:19:07 2013

    [100] fu_sync_pss_to_standby_apply:Input event not MTS msg

16) Event:E_DEBUG, length:58, at 971702 usecs after Wed Feb 16 15:19:02 2013

    [100] fu_sync_pss_to_standby_apply:Input event not MTS msg

17) Event:E_DEBUG, length:58, at 971921 usecs after Wed Feb 16 15:18:57 2013

    [100] fu_sync_pss_to_standby_apply:Input event not MTS msg

18) Event:E_DEBUG, length:58, at 971218 usecs after Wed Feb 16 15:18:52 2013

    [100] fu_sync_pss_to_standby_apply:Input event not MTS msg

19) Event:E_DEBUG, length:58, at 971289 usecs after Wed Feb 16 15:18:47 2013

    [100] fu_sync_pss_to_standby_apply:Input event not MTS msg

Related Commands


Command	Description
show event-log	Displays the event log.

show feature

To display system features, use the show feature command.

show feature

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show feature command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display system features:

vsg# show feature

Feature Name          Instance  State

--------------------  --------  --------

dhcp-snooping         1         disabled

http-server           1         enabled

lacp                  1         disabled

netflow               1         disabled

port-profile-roles    1         disabled

private-vlan          1         disabled

sshServer             1         enabled

tacacs                1         enabled

telnetServer          1         enabled

Related Commands


Command	Description
show http-server	Displays the status of the HTTP server.

show file

To confirm a directory's existence, use the show file command.

show file {bootflash: | debug: | modflash: | volatile:}

Syntax Description


bootflash:	Displays the bootflash directory.
debug:	Displays the debug directory.
modflash:	Displays the modflash directory.
volatile:	Displays the volatile directory.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show file command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to confirm the existence of the bootflash directory:

vsg# show file bootflash:

/bin/showfile: /bootflash/: Is a directory

Related Commands


Command	Description
pwd	Displays the current directory.

show hardware

To display hardware statistics, use the show hardware command.

show hardware [capacity | internal]

Syntax Description


capacity	(Optional) Displays usage levels.
internal	(Optional) Displays internal hardware information.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show hardware command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display management 0 port statistics:

vsg# show hardware internal mgmt0 stats

eth1      Link encap:Ethernet  HWaddr 00:50:56:BB:00:38

          inet addr:10.193.73.138  Bcast:10.193.79.255  Mask:255.255.248.0

          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

          RX packets:1193889201 errors:0 dropped:0 overruns:0 frame:0

          TX packets:1298817 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:1000

          RX bytes:162479674502 (151.3 GiB)  TX bytes:192218320 (183.3 MiB)

Related Commands


Command	Description
show interface	Displays interface status and information.

show hostname

To display the hostname, use the show hostname command.

show hostname

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show hostname command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display the hostname:

vsg# show hostname

VSG129-2

Related Commands


Command	Description
show hosts	Displays the hosts.

show hosts

To display hosts, use the show hosts command.

show hosts

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show hosts command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display hosts:

vsg# show hosts

DNS lookup enabled

Name/address lookup uses domain service

Name servers are 255.255.255.255

Host Address

tst1 209.165.200.227

tst2 209.165.200.229

Related Commands


Command	Description
show hostname	Displays the hostname.

show http-server

To display the status of the HTTP server, use the show http-server command.

show http-server

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show http-server command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows to display the status of the HTTP server:

vsg# show http-server

http-server not enabled

Related Commands


Command	Description
show feature	Displays system features.

show incompatibility

To display incompatibilities with an image, use the show incompatibility command.

show incompatibility system {bootflash: | volatile:}

Syntax Description


system	Displays directories.
bootflash:	Displays the bootflash directory.
volatile:	Displays the volatile directory.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show incompatibility command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows to display incompatibilities with an image:

vsg# show incompatibility system bootflash:nexus-1000v.5.2.1.VSG1.4.0.1.bin

Related Commands


Command	Description
show version image	Displays the software version of an image.

show inspect ftp statistics

To display inspection File Transfer Protocol (FTP) statistics, use the show inspect ftp statistics command.

show inspect ftp statistics [svs-domain]

Syntax Description


svs-domain	(Optional) Displays the SVS domain identification number.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show inspect ftp statistics command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows to display inspection FTP statistics:

vsg# show inspect ftp statistics

Input packets                      1000

Dropped packets                    6

Reset-drop packets                 0

New connections                    1

Deleted connections                0

IPC errors                         0

IPC allocation errors              0

Related Commands


Command	Description
show ip tftp	Displays TFTP client information.

show install all

To display installation logs, use the show install all command.

show install all {failed-standby | failure-reason | impact | status}

Syntax Description


failed-standby	Displays a log that reports failed-standby installations.
failure-reason	Displays a log that reports the reason for failed installations.
impact	Displays a log that reports the impact of installations.
status	Displays a log that reports the status of the current installation.

Defaults

None

Command Modes

EXEC

Global configuration

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show install all command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display a log that reports the status of the current installation:

vsg# show install all status

No installation has taken place since the last reboot.

Related Commands


Command	Description
show version image	Displays the software version of an image.

show interface

To display information about interfaces, use the show interface command.

Syntax Description


brief	(Optional) Displays brief information about an interface.
capabilities	(Optional) Displays information about interface capabilities.
counters	(Optional) Displays interface counters.
data	(Optional) Displays the data interface.
description	(Optional) Displays a description of an interface.
mac-address	(Optional) Displays the MAC address of an interface.
mgmt	(Optional) Displays the management interface.
snmp-ifindex	(Optional) Displays the SNMP ifindex list.
status	(Optional) Displays the interface line status.
switchport	(Optional) Displays the switchport interface.
transceiver	(Optional) Displays interface transceiver information.
trunk	(Optional) Displays trunk interface information.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show interface command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display information about the management 0 interface:

vsg# show interface mgmt 0

mgmt0 is up

  Hardware: Ethernet, address: 0050.56bb.0038 (bia 0050.56bb.0038)

  Internet Address is 10.193.73.138/21

  MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,

     reliability 255/255, txload 1/255, rxload 1/255

  Encapsulation ARPA

  full-duplex, 10 Gb/s

  Auto-Negotiation is turned on

  1 minute input rate 44136 bits/sec, 62 packets/sec

  1 minute output rate 1808 bits/sec, 1 packets/sec

Rx

    755797571 input packets 131701 unicast packets 2575417 multicast packets

    753090453 broadcast packets 107614075553 bytes

Tx

    1240518 output packets 1144680 unicast packets 43411 multicast packets

    52427 broadcast packets 203763544 bytes

Related Commands


Command	Description
show ip interface	Displays IP interface information.

show ip

To display IP statistics, use the show ip command.

show ip {adjacency | arp | client | interface | internal | logging | process | route | static-route | traffic}

Syntax Description


adjacency	Displays the IP adjacency table.
arp	Displays IP Address Resolution Protocol (ARP) table and statistics.
client	Displays clients registered with the IP process.
interface	Displays the IP interface information.
internal	Displays the internal IP information.
logging	Displays the IP policy logging table.
process	Displays the global IP information.
route	Displays the routing information.
static-route	Displays the configured static routes.
traffic	Displays IP software processed traffic statistics.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show ip command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display IP traffic statistics:

vsg# show ip traffic

IP Software Processed Traffic Statistics

----------------------------------------

Transmission and reception:

  Packets received: 647601245, sent: 1145486, consumed: 0,

  Forwarded, unicast: 1099007, multicast: 0, Label: 0

Opts:

  end: 0, nop: 0, basic security: 0, loose source route: 0

  timestamp: 0, record route: 0

  strict source route: 0, alert: 4,

  other: 0

Errors:

  Bad checksum: 0, packet too small: 0, bad version: 0,

  Bad header length: 0, bad packet length: 0, bad destination: 0,

  Bad ttl: 0, could not forward: 645386546, no buffer dropped: 0,

  Bad encapsulation: 20, no route: 377, non-existent protocol: 0

  MBUF pull up fail: 0

Fragmentation/reassembly:

  Fragments received: 0, fragments sent: 0, fragments created: 0,

  Fragments dropped: 0, packets with DF: 0, packets reassembled: 0,

  Fragments timed out: 0

ICMP Software Processed Traffic Statistics

------------------------------------------

Transmission:

  Redirect: 30725, unreachable: 0, echo request: 0, echo reply: 0,

  Mask request: 0, mask reply: 0, info request: 0, info reply: 0,

  Parameter problem: 0, source quench: 0, timestamp: 0,

  Timestamp response: 0, time exceeded: 0,

  Irdp solicitation: 0, irdp advertisement: 0

Reception:

  Redirect: 0, unreachable: 0, echo request: 0, echo reply: 0,

  Mask request: 0, mask reply: 0, info request: 0, info reply: 0,

  Parameter problem: 0, source quench: 0, timestamp: 0,

  Timestamp response: 0, time exceeded: 0,

  Irdp solicitation: 0, irdp advertisement: 0,

  Format error: 0, checksum error: 0

Statistics last reset: never

Related Commands


Command	Description
show ipv6	Displays IPv6 information.

show ipv6

To display IPv6 statistics, use the show ipv6 command.

show ipv6 {adjacency | icmp | mld | nd | neighbor | route | routers}

Syntax Description


adjacency	Displays the IPv6 adjacency table.
icmp	Displays ICMPv6 information.
mld	Displays Multicast Listener Discovery information.
nd	Displays Neighbor Discovery interface information.
neighbor	Displays IPv6 neighbor information.
route	Displays the IPv6 routing table.
routers	Displays neighbor routing information.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show ipv6 command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display an IPv6 adjacency table:

vsg# show ipv6 adjacency summary

IPv6 AM Table - Adjacency Summary

  Static  : 2

  Dynamic : 03

  Others  : 0

  Total   : 5

Related Commands


Command	Description
show ip	Displays IP information.

show kernel internal

To display kernel information, use the show kernel command.

show kernel internal {aipc | cpuhogmon | ide-statistics | malloc-stats | meminfo | messages | skb-stats | softnetstat}

Syntax Description


aipc	Displays kernel AIPC information.
cpuhogmon	Displays CPU hog monitoring.
ide-statistics	Displays IDE statistics.
malloc-stats	Displays malloc statistics.
meminfo	Displays kernel memory usage information.
messages	Displays kernel messages.
skb-stats	Displays SK buffer allocation statistics.
softnetstat	Displays kernel network queue information.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show kernel internal command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display information about memory:

vsg# show kernel internal meminfo

MemTotal:      1944668 kB

MemFree:        909024 kB

Buffers:         70880 kB

Cached:         397144 kB

RAMCached:      351732 kB

Allowed:        486167 Pages

Free:           227256 Pages

Available:      257029 Pages

SwapCached:          0 kB

Active:         567632 kB

Inactive:       329852 kB

HighTotal:     1179584 kB

HighFree:       334080 kB

LowTotal:       765084 kB

LowFree:        574944 kB

SwapTotal:           0 kB

SwapFree:            0 kB

Dirty:               0 kB

Writeback:           0 kB

Mapped:         548996 kB

Slab:            29756 kB

CommitLimit:    972332 kB

Committed_AS:   943536 kB

PageTables:       4064 kB

VmallocTotal:   114680 kB

VmallocUsed:     87644 kB

VmallocChunk:    26940 kB

Related Commands


Command	Description
show system internal kernel	Displays kernel information.

show line

To display the command line configuration, use the show line command.

show line [com1 | console]

Syntax Description


com1	(Optional) Displays the auxiliary command line configuration.
console	(Optional) Displays the console command line configuration.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show line command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display the command line configuration:

vsg# show line

line Console:

    Speed:        9600 baud

    Databits:     8 bits per byte

    Stopbits:     1 bit(s)

    Parity:       none

    Modem In: Disable

    Modem Init-String -

        default : ATE0Q1&D2&C1S0=1\015

line Aux:

    Speed:        9600 baud

    Databits:     8 bits per byte

    Stopbits:     1 bit(s)

    Parity:       none

    Modem In: Disable

    Modem Init-String -

        default : ATE0Q1&D2&C1S0=1\015

    Hardware Flowcontrol: ON

Related Commands


Command	Description
cli	Configures the command line.

show logging

To display logging information, use the show logging command.

Syntax Description


console	(Optional) Displays the console logging configuration.
info	(Optional) Displays the logging configuration.
internal	(Optional) Displays syslog information.
last	(Optional) Displays the last few lines of a log.
level	(Optional) Displays the facility logging configuration.
logfile	(Optional) Displays a log file.
module	(Optional) Displays the module logging configuration.
monitor	(Optional) Displays the monitor logging configuration.
pending	(Optional) Displays the server address pending configuration.
pending-diff	(Optional) Displays the server address pending configuration.
server	(Optional) Displays the server logging configuration.
session	(Optional) Displays the logging session status.
status	(Optional) Displays the logging status.
timestamp	(Optional) Displays the logging time-stamp configuration.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show logging command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

When you enter a show command that displays a long list of data, you can press Ctrl-C at any time to exit that list.

Examples

This example shows how to display the logfile:

VSG129-2# show logging logfile start-seqn 1

Last Log cleared/wrapped time is : None

1: 2013 Jan 21 17:17:21 VSG129-2 %KERN-2-SYSTEM_MSG: Starting kernel... - kernel

2: 2013 Jan 21 17:17:21 VSG129-2 %KERN-3-SYSTEM_MSG: PCI: Cannot allocate resour

ce region 1 of device 0000:00:0f.0 - kernel

3: 2013 Jan 21 17:17:21 VSG129-2 %KERN-3-SYSTEM_MSG: sda: assuming drive cache:

write through - kernel

4: 2013 Jan 21 17:17:21 VSG129-2 %KERN-3-SYSTEM_MSG: sda: assuming drive cache:

write through - kernel

5: 2013 Jan 21 17:17:21 VSG129-2 %KERN-3-SYSTEM_MSG: CMOS: Module initialized -

kernel

6: 2013 Jan 21 17:17:21 VSG129-2 %KERN-1-SYSTEM_MSG: calling register_stun_set_d

omain_id() - kernel

7: 2013 Jan 21 17:17:21 VSG129-2 %KERN-1-SYSTEM_MSG: register_stun_set_domain_id

() - kernel

8: 2013 Jan 21 17:17:21 VSG129-2 %KERN-1-SYSTEM_MSG: Successfully registered SNA

P client for SNAP=0x00000c013200  0xf1117360 - kernel

9: 2013 Jan 21 17:17:21 VSG129-2 %KERN-1-SYSTEM_MSG: STUN : Successfully created

 Socket - kernel

10: 2013 Jan 21 17:17:21 VSG129-2 %KERN-3-SYSTEM_MSG: redun_platform_ioctl : Ent

ered - kernel

11: 2013 Jan 21 17:17:21 VSG129-2 %KERN-3-SYSTEM_MSG: redun_platform_ioctl : SW

version is set 5.2.1VSG1(4.1)  - kernel

12: 2013 Jan 21 17:17:21 VSG129-2 %LOCAL7-3-SYSTEM_MSG:  - dhcpd

13: 2013 Jan 21 17:17:21 VSG129-2 %LOCAL7-3-SYSTEM_MSG: No subnet declaration fo

r ftp0 (127.2.1.1). - dhcpd

14: 2013 Jan 21 17:17:21 VSG129-2 %LOCAL7-3-SYSTEM_MSG: ** Ignoring requests on

ftp0.  If this is not what - dhcpd

15: 2013 Jan 21 17:17:21 VSG129-2 %LOCAL7-3-SYSTEM_MSG:    you want, please writ

e a subnet declaration - dhcpd

16: 2013 Jan 21 17:17:21 VSG129-2 %LOCAL7-3-SYSTEM_MSG:    in your dhcpd.conf fi

le for the network segment - dhcpd

17: 2013 Jan 21 17:17:21 VSG129-2 %LOCAL7-3-SYSTEM_MSG:    to which interface ft

p0 is attached. ** - dhcpd

18: 2013 Jan 21 17:17:21 VSG129-2 %LOCAL7-3-SYSTEM_MSG:  - dhcpd

19: 2013 Jan 21 17:17:21 VSG129-2 %LOCAL7-3-SYSTEM_MSG: Not configured to listen

 on any interfaces! - dhcpd

20: 2013 Jan 21 17:17:21 VSG129-2 %USER-2-SYSTEM_MSG: CLIS: loading cmd files be

gin  - clis

21: 2013 Jan 21 17:17:21 VSG129-2 %KERN-3-SYSTEM_MSG: redun_platform_ioctl : Ent

ered - kernel

22: 2013 Jan 21 17:17:21 VSG129-2 %KERN-3-SYSTEM_MSG: redun_platform_ioctl : Hos

t name is set VSG129-2 - kernel

23: 2013 Jan 21 17:17:23 VSG129-2 %LOCAL7-3-SYSTEM_MSG:  - dhcpd

24: 2013 Jan 21 17:17:23 VSG129-2 %LOCAL7-3-SYSTEM_MSG: No subnet declaration fo

r ftp0 (127.2.1.1). - dhcpd

25: 2013 Jan 21 17:17:23 VSG129-2 %LOCAL7-3-SYSTEM_MSG: ** Ignoring requests on

ftp0.  If this is not what - dhcpd

26: 2013 Jan 21 17:17:23 VSG129-2 %LOCAL7-3-SYSTEM_MSG:    you want, please writ

e a subnet declaration - dhcpd

27: 2013 Jan 21 17:17:23 VSG129-2 %LOCAL7-3-SYSTEM_MSG:    in your dhcpd.conf fi

le for the network segment - dhcpd

28: 2013 Jan 21 17:17:23 VSG129-2 %LOCAL7-3-SYSTEM_MSG:    to which interface ft

p0 is attached. ** - dhcpd

29: 2013 Jan 21 17:17:23 VSG129-2 %LOCAL7-3-SYSTEM_MSG:  - dhcpd

30: 2013 Jan 21 17:17:23 VSG129-2 %LOCAL7-3-SYSTEM_MSG: Not configured to listen

 on any interfaces! - dhcpd

31: 2013 Jan 21 17:17:23 VSG129-2 %MODULE-5-ACTIVE_SUP_OK: Supervisor 1 is activ

e (serial: T5056BB0038)

32: 2013 Jan 21 17:17:23 VSG129-2 %PLATFORM-5-MOD_STATUS: Module 1 current-statu

s is MOD_STATUS_ONLINE/OK

33: 2013 Jan 21 17:17:26 VSG129-2 %USER-2-SYSTEM_MSG: CLIS: loading cmd files en

d  - clis

34: 2013 Jan 21 17:17:26 VSG129-2 %USER-2-SYSTEM_MSG: CLIS: init begin  - clis

35: 2013 Jan 21 17:17:44 VSG129-2 %USER-2-SYSTEM_MSG: Invalid feature name eth-p

ort-sec - clis

36: 2013 Jan 21 17:18:00 VSG129-2 %POLICY_ENGINE-5-POLICY_ACTIVATE_EVENT: Policy

 p1 is activated by profile sp1

37: 2013 Jan 21 17:18:00 VSG129-2 %IM-5-IM_INTF_STATE: mgmt0 is DOWN in vdc 1

38: 2013 Jan 21 17:18:00 VSG129-2 %IM-5-IM_INTF_STATE: mgmt0 is UP in vdc 1

39: 2013 Jan 21 17:18:00 VSG129-2 %IM-5-IM_INTF_STATE: data0 is DOWN in vdc 1

40: 2013 Jan 21 17:18:00 VSG129-2 %IM-5-IM_INTF_STATE: data0 is UP in vdc 1

41: 2013 Jan 21 17:18:00 VSG129-2 %POLICY_ENGINE-5-POLICY_COMMIT_EVENT: Commit o

peration SUCCESSFUL

42: 2013 Jan 21 17:18:00 VSG129-2 %VDC_MGR-2-VDC_ONLINE: vdc 1 has come online

43: 2013 Jan 24 12:53:47 VSG129-2 %VSHD-5-VSHD_SYSLOG_CONFIG_I: Configured from

vty by admin on 171.70.216.167@pts/1

44: 2013 Feb  7 16:30:00 VSG129-2 %AUTHPRIV-3-SYSTEM_MSG: pam_aaa:Authentication

 failed for user admin from 171.71.29.84 - sshd[7496]

45: 2013 Feb  9 18:41:38 VSG129-2 %VSHD-5-VSHD_SYSLOG_CONFIG_I: Configured from

vty by admin on 10.21.84.66@pts/10

46: 2013 Feb 14 14:15:31 VSG129-2 %VSHD-5-VSHD_SYSLOG_CONFIG_I: Configured from

vty by admin on 171.71.29.84@pts/15

47: 2013 Feb 14 15:58:21 VSG129-2 %VSHD-5-VSHD_SYSLOG_CONFIG_I: Configured from

vty by admin on 171.71.29.84@pts/15

48: 2013 Feb 14 16:34:25 VSG129-2 %VSHD-5-VSHD_SYSLOG_CONFIG_I: Configured from

vty by admin on 171.71.29.84@pts/15

49: 2013 Feb 14 18:38:57 VSG129-2 %VSHD-5-VSHD_SYSLOG_CONFIG_I: Configured from

vty by admin on 171.71.29.84@pts/16

50: 2013 Feb 17 20:18:55 VSG129-2 %AUTHPRIV-3-SYSTEM_MSG: pam_aaa:Authentication

 failed for user admin from 10.21.144.180 - sshd[23785]

51: 2013 Feb 18 15:14:03 VSG129-2 %VSHD-5-VSHD_SYSLOG_CONFIG_I: Configured from

vty by admin on 171.71.29.84@pts/22

52: 2013 Feb 21 13:16:43 VSG129-2 %VSHD-5-VSHD_SYSLOG_CONFIG_I: Configured from

vty by admin on 171.71.29.84@pts/26

53: 2013 Feb 21 14:08:23 VSG129-2 %VSHD-5-VSHD_SYSLOG_CONFIG_I: Configured from

vty by admin on 171.71.29.84@pts/26

54: 2013 Feb 22 11:47:27 VSG129-2 %VSHD-5-VSHD_SYSLOG_CONFIG_I: Configured from

vty by admin on 171.71.29.84@pts/28

Related Commands


Command	Description
show event-log	Displays the event log.

show ntp

To display Network Time Protocol (NTP) information, use the show ntp command.

Syntax Description


authentication-keys	(Optional) Displays the authentication keys.
authentication-status	(Optional) Displays the NTP Authentication status.
internal	(Optional) Displays internal NTP information.
logging-status	(Optional) Displays the NTP logging status.
peer-status	(Optional) Displays the status of all the peers.
peers	(Optional) Displays all the peers.
pending	(Optional) Displays the NTP temporary database.
pending-diff	(Optional) Displayes the pending database difference.
rts-update	(Optional) Displays the status of RTS.
session	(Optional) Displays the session information.
source	(Optional) Displays the source IP address.
statistics	(Optional) Displays NTP statistics.
status	(Optional) Show the NTP distribution status.
trusted-keys	(Optional) Displays the trusted keys.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show ntp command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display local NTP statistics:

VSG129-2# show ntp statistics local

system uptime:          2669747

time since reset:       2669747

old version packets:    0

new version packets:    10

unknown version number: 0

bad packet format:      0

packets processed:      0

bad authentication:     0

Related Commands


Command	Description
show clock	Displays the time.

show password

To enable the password strength check, use the show password command.

show password strength-check

Syntax Description


strength-check	Displays the strength of the password.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show password command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to enable password strength check:

vsg# show password strength-check

Password strength check enabled

vsg#

Related Commands


Command	Description
show aaa	Display authentication and authorization information.

show policy-engine

To display policy engine statistics, use the show policy-engine command.

show policy-engine {policy-name | stats}

Syntax Description


policy-name	Name of the policy engine.
stats	Displays policy engine statistics.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show policy-engine command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display policy engine statistics:

vsg# show policy-engine stats

Policy Match Stats:

p1                :     30378

  r1              :     30378 (Permit)

  NOT_APPLICABLE  :         0 (Drop)

Related Commands


Command	Description
policy	Configures a policy.

show processes

To display processes, use the show processes command.

show processes [cpu | log | memory | vdc]

Syntax Description


cpu	(Optional) Displays information about CPU processes.
log	(Optional) Displays information about process logs.
memory	(Optional) Displays information about memory processes.
vdc	(Optional) Displays information about virtual device context (VDC) processes.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show processes command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

When you enter a show command that displays a long list of data, you can press Ctrl-C at any time to exit that list.

Examples

This example shows how to display information about memory processes:

vsg(config)# show processes memory

PID    MemAlloc  MemLimit    MemUsed     StackBase/Ptr      Process

-----  --------  ----------  ----------  -----------------  ----------------

    1    147456  0           1441792     bffffe60/bffff950  init

    2         0  0           0                  0/0         ksoftirqd/0

    3         0  0           0                  0/0         desched/0

    4         0  0           0                  0/0         events/0

    5         0  0           0                  0/0         khelper

   10         0  0           0                  0/0         kthread

   18         0  0           0                  0/0         kblockd/0

   35         0  0           0                  0/0         khubd

  188         0  0           0                  0/0         pdflush

  189         0  0           0                  0/0         pdflush

  190         0  0           0                  0/0         kswapd0

  191         0  0           0                  0/0         aio/0

  776         0  0           0                  0/0         kseriod

  823         0  0           0                  0/0         kide/0

  833         0  0           0                  0/0         ata/0

  837         0  0           0                  0/0         scsi_eh_0

 1175         0  0           0                  0/0         kjournald

 1180         0  0           0                  0/0         kjournald

 1740         0  0           0                  0/0         kjournald

 1747         0  0           0                  0/0         kjournald

 1976    155648  0           1536000     bffffdb0/bffffcb0  portmap

 1989         0  0           0                  0/0         nfsd

 1990         0  0           0                  0/0         nfsd

 1991         0  0           0                  0/0         nfsd

 1992         0  0           0                  0/0         nfsd

 1993         0  0           0                  0/0         nfsd

 1994         0  0           0                  0/0         nfsd

 1995         0  0           0                  0/0         nfsd

 1996         0  0           0                  0/0         nfsd

 1997         0  0           0                  0/0         lockd

 1998         0  0           0                  0/0         rpciod

 2003    180224  0           1642496     bffffd80/bffffb60  rpc.mountd

 2009    159744  0           1601536     bffffda0/bffffb10  rpc.statd

 2036   2551808  0           15540224    bffffd40/bfffed20  sysmgr

 2319         0  0           0                  0/0         mping-thread

 2320         0  0           0                  0/0         mping-thread

 2336         0  0           0                  0/0         stun_kthread

 2337         0  0           0                  0/0         stun_arp_mts_kt

 2338         0  0           0                  0/0         stun_packets_re

 2373         0  0           0                  0/0         redun_kthread

 2374         0  0           0                  0/0         redun_timer_kth

 2513         0  0           0                  0/0         sf_rdn_kthread

 2514    364544  214619750   69095424    bffffa40/bffff8b0  xinetd

 2515    421888  95819750    68964352    bffffa70/bffff8a0  tftpd

 2516  23015424  125824371   106741760   bffffa40/bfffe73c  syslogd

 2517    933888  109213561   74809344    bffffa80/bfffe850  sdwrapd

 2519   4120576  0           81752064    bffffa70/bfff79e0  platform

 2524         0  0           0                  0/0         ls-notify-mts-t

 2537    282624  92591910    74170368    bffffa70/bfffe058  pfm_dummy

 2545    155648  0           1441792     bffffa60/bffff988  klogd

 2552   2109440  393881241   78864384    bffffa80/bffff278  vshd

 2553   1073152  95385382    76709888    bffffa80/bfffe4d0  stun

 2554   2732032  367819865   144842752   bffffa30/bffff690  smm

 2555   1155072  165002041   75182080    bffffa50/bfffe4b0  session-mgr

 2556    479232  135244736   73154560    bffffa40/bffff770  psshelper

 2557    212992  96888422    69488640    bffff9f0/bfffe680  lmgrd

 2558    528384  91650240    73543680    bffffa60/bffff5f8  licmgr

 2559    512000  92225126    78594048    bffffa90/bffff260  fs-daemon

 2560    397312  85133312    72286208    bffffa60/bfff3690  feature-mgr

 2561    315392  85106278    72122368    bffffa70/bffff840  confcheck

 2562    958464  92785651    74874880    bffffa60/bfffe910  capability

 2563    479232  135244736   73154560    bffffa20/bffff750  psshelper_gsvc

 2573    217088  0           2572288     bffff9c0/bffff820  cisco

 2576   7733248  664149376   106373120   bffffa30/bffff3e0  clis

 2583   2248704  372636352   103321600   bffffa50/bfffd960  port-profile

 2585    274432  85254963    72257536    bffffa60/bffff830  xmlma

 2586   1245184  95083507    76578816    bffffa60/bfffe2dc  vnm_pa_intf

 2587   2146304  115889523   76902400    bffffa60/bfffe060  vmm

 2588    708608  127975372   76795904    bffffa70/bfffe9c0  vdc_mgr

 2589    634880  109440179   84406272    bffffaa0/bffff3c0  ttyd

 2590    450560  78402579    70279168    bffffa70/bffff530  sysinfo

 2591    438272  91884531    73687040    bffffa80/bffff490  sksd

 2593    610304  91614195    73551872    bffffa70/bffff234  res_mgr

 2594   1028096  93695782    75186176    bffffa80/bfffe4b0  plugin

 2595   3956736  375542464   94433280    bffffa50/bffff4f0  npacl

 2596    811008  175709177   74731520    bffffa60/bfffbf80  mvsh

 2597   2596864  109250944   79581184    bffffa80/bfffcf70  module

 2598   3489792  182622105   87179264    bffffa80/bfffd980  fwm

 2599   1175552  100089228   81141760    bffffa60/bfffe490  evms

 2600   1015808  93312806    74964992    bffffa60/bfffe4a0  evmc

 2601    581632  92554035    84045824    bffffa90/bffff470  core-dmon

 2602    454656  92722572    74289152    bffffa80/bffff3b0  bootvar

 2603   9854976  367171059   93200384    bffffa60/bffff4c0  ascii-cfg

 2604    647168  87422156    74403840    bffffa40/bfffe678  securityd

 2605   1048576  98226585    84234240    bffffa60/bfffdce0  cert_enroll

 2606    495616  87332044    75096064    bffffa60/bfffe850  aaa

 2614   5029888  369338252   86528000    bffffa50/bffff960  l3vm

 2615   4288512  366242905   106196992   bffffa50/bffff950  u6rib

 2616   6340608  367112486   129155072   bffffa50/bffff8c0  urib

 2617   1568768  139989132   77787136    bffffa70/bfffe680  ExceptionLog

 2618   3047424  116793318   86609920    bffffa80/bfffe490  ifmgr

 2619    806912  87336550    74678272    bffffa80/bfffe8c0  tcap

 2623   5693440  262289420   137621504   bffffa10/bfffd8f0  snmpd

 2636    163840  293819750   68661248    bffffa20/bffff018  PMon

 2637   3104768  256175321   84361216    bffffa50/bfffe210  aclmgr

 2662   9428992  373095923   151752704   bffffa50/bffff530  adjmgr

 2676   4755456  366648409   128327680   bffffa50/bffff920  arp

 2677   6037504  369130995   110952448   bffffa40/bffff2c8  icmpv6

 2678  53452800  584746060   201703424   bffffa20/bffff490  netstack

 2751   1368064  229098848   124534784   bffffa40/bfffdac0  radius

 2752    233472  98996198    69996544    bffffa30/bffff8c8  ip_dummy

 2753    233472  98996198    69996544    bffffa30/bffff8c8  ipv6_dummy

 2754   1826816  165916537   126001152   bffffa50/bfffeb30  ntp

 2755    233472  98996198    69996544    bffffa30/bffff8c8  pktmgr_dummy

 2756    233472  98996198    69996544    bffffa30/bffff8c8  tcpudp_dummy

 2758   1097728  202319744   126873600   bffffa60/bfffed90  cdp

 2762   1024000  109019750   80056320    bffff990/bfffec90  dcos-xinetd

 2764    729088  0           12656640    bffffef0/bffff220  ntpd

 2881   1409024  113508736   83517440    bffffa80/bfffe0a0  vsim

 2882   2785280  366824128   90828800    bffffa60/bfffdbb0  ufdm

 2883   1273856  365913996   140460032   bffffa60/bfffd970  sal

 2884   2342912  107612243   84082688    bffffa60/bfffd940  pltfm_config

 2885   4083712  206235110   88436736    bffffa50/bfffd970  monitor

 2886   3870720  317199308   90644480    bffffa50/bfffdf80  ipqosmgr

 2887   7446528  504510195   132648960   bffffa50/bffff980  igmp

 2888   5025792  186650112   89972736    bffffa40/bfffd8f0  eth-port-sec

 2889   2170880  199314508   82145280    bffffa60/bfffe220  copp

 2890   2453504  118573030   87961600    bffffa40/bfffd730  eth_port_channel

 2891   8450048  156970739   94244864    bffffa50/bfffe990  vlan_mgr

 2892  14442496  309585689   102936576   bffffa60/bfffdb40  ethpm

 2933   1544192  204094950   85684224    bffffa60/bfffe480  msp

 2936   1048576  93330828    74928128    bffffa50/bfffe480  vsn_service_mgr

 2937  169234432  1191148288  251592704   bffffa60/bfffe48c  sp

 2938  10510336  651213798   103919616   bffffa40/bfffe89c  policy_engine

 2939   3485696  633948339   85774336    bffffa40/bfffe24c  inspect

 3006    159744  0           1441792     bffffdc0/bffffc58  getty

 3007    172032  0           1527808     bffffd90/bffffc28  getty

 3019   1142784  0           14630912    bffffa30/bfffe810  dcos_sshd

 3021   1167360  0           31797248    bffffdc0/bffffaa0  vsh

28520   1142784  0           14630912    bffffa30/bfffe810  dcos_sshd

28521   1167360  0           31797248    bffffdc0/bfffa7c8  vsh

30327    155648  0           1712128     bffffcf0/bffffb4c  more

30328   1167360  0           31830016    bffffdc0/bfffa2d8  vsh

30329         0  0           0           bffffa10/bfffef28  ps

All processes: MemAlloc = 445857792

Related Commands


Command	Description
show system resources	Displays memory usage.

show redundancy status

To display redundancy status, use the show redundancy status command.

show redundancy status

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show redundancy status command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display redundancy status:

vsg# show redundancy status

Redundancy role

---------------

      administrative:   standalone

         operational:   standalone

Redundancy mode

---------------

      administrative:   HA

         operational:   None

This supervisor (sup-1)

-----------------------

    Redundancy state:   Active

    Supervisor state:   Active

      Internal state:   Active with no standby

Other supervisor (sup-2)

------------------------

    Redundancy state:   Not present

    Supervisor state:   N/A

      Internal state:   N/A

System start time:          Fri Jan 21 15:45:28 2013

System uptime:              32 days, 1 hours, 46 minutes, 2 seconds

Kernel uptime:              32 days, 0 hours, 14 minutes, 45 seconds

Active supervisor uptime:   32 days, 1 hours, 45 minutes, 20 seconds

Related Commands


Command	Description
show system redundancy status	Displays the system redundancy status.

show resource

To display resources, use the show resource command.

Syntax Description


internal	(Optional) Displays resource manager information.
monitor-session	(Optional) Displays monitor session information.
port-channel	(Optional) Displays port-channel information.
u4route-mem	(Optional) Displays u4route memory information.
u6route-mem	(Optional) Displays u6route memory information.
vlan	(Optional) Displays VLAN information.
vrf	(Optional) Displays the virtual routing and forwarding (VRF) information.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show resource command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display resources:

vsg# show resource

     Resource               Min       Max      Used    Unused     Avail

    -----------            -----     -----    ------  --------   -------

     vlan                16      2049         2        14      2047

     monitor-session      0         2         0         0         2

     vrf                 16      8192         2        14      8190

     port-channel         0       768         0         0       768

     u4route-mem         32        32         1        31        31

     u6route-mem         16        16         1        15        15

Related Commands


Command	Description
show system resources	Displays system resources.

show role

To show user role information, use the show role command.

Syntax Description


feature	(Optional) Displays role features.
name	(Optional) Displays the role name.
role-name	Name of role.
pending	(Optional) Displays uncommitted role configurations.
pending-diff	(Optional) Displays uncommitted role configurations.
session	(Optional) Displays the role session status.
status	(Optional) Displays the role status.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show role command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display the details of the network-admin role:

vsg# show role name network-admin

Role: network-admin

  Description: Predefined network admin role has access to all commands

  on the switch

  -------------------------------------------------------------------

  Rule    Perm    Type        Scope               Entity

  -------------------------------------------------------------------

  1       permit  read-write

Related Commands


Command	Description
show users	Displays users.

show running-config

To display running configurations, use the show running-config command.

Syntax Description


aaa	(Optional) Displays the Authentication, Authorization and Accounting (AAA) configuration.
adjmgr	(Optional) Displays adjacency manager information.
all	(Optional) Displays the current operating configurations.
arp	(Optional) Displays Address Resolution Protocol (ARP) information.
cdp	(Optional) Displays the Cisco Discovery Protocol (CDP) configuration.
diff	(Optional) Displays the difference between the running and startup configurations.
eem	(Optional) Displays the event manager running configuration.
exclude	(Optional) Excludes the running configuration of specified features.
exclude-provision	(Optional) Exclude configuration for offline pre-provisioned interfaces.
expand-port-profile	(Optional) Displays port profile information.
icmpv6	(Optional) Displays Internet Control Message Protocol (ICMPv6) information.
interface	(Optional) Displays interface configurations.
ip	(Optional) Displays Internet Protocol (IP) information.
l3vm	(Optional) Displays Layer 3 Virtual Machine (L3VM) information.
ntp	(Optional) Displays Network Time Protocol (NTP) information.
network	(Optional) Displays the network information.
object-group	(Optional) Displays the object-group configuration.
policy	(Optional) Displays the policy configuration.
rule	(Optional) Displays the rule configuration.
security	(Optional) Displays the security configurations.
snmp	(Optional) Displays the SNMP configuration.
vdc-all	(Optional) Displays all virtual device context (VDC) configurations.
vrf	(Optional) Displays Virtual Routing and Forwarding (VRF) information.
vshd	(Optional) Displays the running configuration for virtual shared hardware device (VSHD).
zone	(Optional) Displays the zone configuration.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show running-config command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

When you enter a show command that displays a long list of data, you can press Ctrl-C at any time to exit that list.

Examples

This example shows how to display the running configuration:

vsg# show running-config

!Command: show running-config

!Time: Sat Jul  6 04:34:01 2013

version 5.2(1)VSG1(4.1)

system memory-thresholds minor 50 severe 80 critical 89

system memory threshold critical no-process-kill

logging level feature-mgr 0

hostname firewall

no feature telnet

role feature-group name 123

username admin password 5 $1$0gfpvdjy$yvn.yLZ9wK4uJUHieAnBH.  role network-admin

username admin role network-operator

no password strength-check

banner motd #Nexus 1000v Switch

ssh key rsa 2048

no ip domain-lookup

ip host firewall 10.2.71.65

ntp server 10.2.71.69

vrf context management

  ip route 0.0.0.0/0 10.2.0.1

port-channel load-balance ethernet source-mac

port-profile default max-ports 32

system storage-loss log time 30

interface mgmt0

  ip address 10.2.71.65/16

interface control0

  no snmp trap link-status

  ip address 70.1.0.75/24

line console

line vty

boot kickstart bootflash:/nexus-1000v-kickstart.5.2.1.VSG1.4.0.1.bin sup-1

boot system bootflash:/nexus-1000v.5.2.1.VSG1.4.0.1.bin sup-1

boot kickstart bootflash:/nexus-1000v-kickstart.5.2.1.VSG1.4.0.1.bin sup-2

boot system bootflash:/nexus-1000v.5.2.1.VSG1.4.0.1.bin sup-2

ip route 70.1.0.0/24 90.1.0.27

ip route 90.1.0.0/24 90.1.0.27

limit-resource erspan-flow-id minimum 0 maximum 0

svs-domain

  domain id 202

  control vlan 1

  packet vlan 1

  svs mode L3 interface mgmt0

  switch-guid b1d6dac9-4a18-4f9f-8f6f-7552675a5c46

security-profile SP1@root/T1

  policy Ps-large@root/T1

  custom-attribute vnsporg "root/t1"

security-profile SP2-clone@root/T1

  policy PS2-1@root/T1

  custom-attribute vnsporg "root/t1"

security-profile SP2@root/T1

  policy PS2-1@root/T1

  custom-attribute vnsporg "root/t1"

security-profile default@root

  policy default@root

  custom-attribute vnsporg "root"

zone 123 cond-match-criteria: match-all

zone DMZ cond-match-criteria: match-all

zone vzone2@root/T1 cond-match-criteria: match-all

  condition 10 net.ip-address neq 20.1.0.7

zone web1 cond-match-criteria: match-all

zone zone1@root/T1 cond-match-criteria: match-all

  condition 10 net.ip-address eq 0.0.0.0

rule P-123456---large-name-12345-larg/all-p@root/T1 cond-match-criteria: match-a

ll

  action permit

  action log

rule P-123456---large-name-12345-larg/ftp-permit@root/T1 cond-match-criteria: ma

tch-all

  service/protocol-attribute

    condition 10 net.protocol eq 6

  action permit

  action log

rule P-123456---large-name-12345-larg/large-name-rule-large-name-rule@root/T1 co

nd-match-criteria: match-all

  service/protocol-attribute

    condition 11 net.protocol eq 1

  src-port-attribute

    condition 10 src.net.port eq 11

  action permit

  action log

rule P-123456---large-name-12345-larg/permit-all@root/T1 cond-match-criteria: ma

tch-all

  action permit

  action log

rule P-123456---large-name-12345-larg/r-1@root/T1 cond-match-criteria: match-all

  src-attributes

    condition 10 src.zone.name eq vzone2@root/T1

  action permit

rule P-123456---large-name-12345-larg/tftp-permit@root/T1 cond-match-criteria: m

atch-all

  service/protocol-attribute

    condition 10 net.protocol eq 17

  action permit

  action log

rule P1/R1@root/T1 cond-match-criteria: match-all

  action permit

rule p-rst/R-rst@root/T1 cond-match-criteria: match-all

  src-attributes

    condition 10 src.zone.name eq zone1@root/T1

  action reset

  action log

Policy P1

Policy P1@root

Policy PS2-1@root/T1

  rule p-rst/R-rst@root/T1 order 101

Policy Ps-large@root/T1

  rule P-123456---large-name-12345-larg/r-1@root/T1 order 101

  rule P-123456---large-name-12345-larg/all-p@root/T1 order 201

  rule P-123456---large-name-12345-larg/large-name-rule-large-name-rule@root/T1

order 301

  rule P-123456---large-name-12345-larg/ftp-permit@root/T1 order 401

  rule P-123456---large-name-12345-larg/tftp-permit@root/T1 order 501

  rule P-123456---large-name-12345-larg/permit-all@root/T1 order 601

  rule P1/R1@root/T1 order 702

Policy default@root

Policy p2

service firewall logging enable

nsc-policy-agent

  registration-ip 10.2.71.64

  shared-secret **********

policy-agent-image bootflash:/vnmc-vsgpa.2.1.1e.bin

  log-level crit

logging logfile messages 7 size 4096

logging server 10.2.71.64 7 facility local0

logging server 10.2.71.69 4 facility user

Related Commands


Command	Description
show startup-config	Displays the startup configuration.

show service-path connection

To display service path connection information, use the show service-path connection command.

show service-path connection [svs-domain-id domain-id [module module-number]]

Syntax Description


svs-domain-id	(Optional) Displays the SVS domain.
domain-id	Domain identification number. The range is from 1 to 4095.
module	(Optional) Displays the module.
module-number	Module number. The range is from 3 to 66.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show service-path connection command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Note The show service-path connection command might not display inspect-rsh actions for remote shell traffic. This issue affects the display only and does not disrupt the traffic policy decisions.

Examples

This example shows how to display service path connections:

vsg# show service-path connection

Flags:

P - policy at src                      p - policy at dst

O - conn offloaded to ser-path at src  o - conn offloaded to ser-path at dst

S - seen syn from src                  s - seen syn from dst

A - seen ack for syn/fin from src      a - seen ack for syn/fin from dst

F - seen fin from src                  f - seen fin from dst

R - seen rst from src                  r - seen rst from dst

E - tcp conn established (SasA done)   T - tcp conn torn down (FafA done)

#SVS Domain 3720  Module   5

Proto SrcIP[:Port]          DstIP[:Port]           VLAN Action    Flags

tcp  172.31.2.206:2677      172.31.2.106:80          PpOoSas

show service-path statistics

To display service path statistics, use the show service-path statistics command.

show service-path statistics [svs-domain-id domain-id [module module-number]]

Syntax Description


svs-domain-id	(Optional) Displays the SVS domain.
domain-id	Domain identification number. The range is from 1 to 4095.
module	(Optional) Displays the module.
module-number	Module number. The range is from 3 to 66.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show service-path statistics command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display service path statistics:

vsg# show service-path statistics

Input Packet                 9130015  Output Packet                 879012

Active Flows                      17  Active Connections                12

Flow Create                    36696  Flow Destroy                   36679

Input Packet Drop                  0  Output Packet Drop                 0

SP Packet Drop                     0  Corrupted Packet                   0

Input mode                    Signal  Input mode change fail             0

Input signal mode                  1  Input interrupt mode               0

PE Corrupted Packet                0  FTP Corrupted Packet               0

RSH Corrupted Packet               0  TFTP Corrupted Packet              0

Buffer Free Fail                   0

Vpath Frag Packet            8249047  Vpath Inst Frag                    0

IPV4 Frag Packet              850338  IPV4 Inst Frag                     0

Aged Vpath Frag Packet             0  Vpath Frag Packet Drop             0

Aged IPV4 Frag Packet             10  IPV4 Frag Packet Drop              0

Bad Vpath Frag                     0  Bad IPV4 Frag                      0

Vpath Frag/Packet Exceed           0  IPV4 Frag/Packet Exceed            0

Total Frag Inst Exceed             0

Non-Vpath Packet                   0 Vpath Ver Mismatch Packet           0

SVS Domain    15  Module   3

  Input Packet                   20957  Output Packet                  19328

  Flow Create                    28856  Flow Destroy                   28848

  Packet Drop                        0

SVS Domain    15  Module   4

  Input Packet                 9109058  Output Packet                 859684

  Flow Create                     7840  Flow Destroy                    7831

  Packet Drop                        0

show snmp

To display Simple Network Management Protocol (SNMP) information, use the show snmp command.

Syntax Description


community	(Optional) Displays SNMP community strings.
context	(Optional) Displays SNMP context mapping entries.
engineID	(Optional) Displays the SNMP engine ID.
group	(Optional) Displays SNMP groups.
host	(Optional) Displays SNMP hosts.
internal	(Optional) Displays internal SNMP information.
sessions	(Optional) Displays SNMP sessions.
source-interface	(Optional) Displays the notifications source interface.
trap	(Optional) Displays SNMP traps.
user	(Optional) Displays SNMPv3 users.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show snmp command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display SNMP users:

vsg# show snmp user

______________________________________________________________

                  SNMP USERS

______________________________________________________________

User                          Auth  Priv(enforce) Groups

____                          ____  _____________ ______

______________________________________________________________

 NOTIFICATION TARGET USERS (configured  for sending V3 Inform)

______________________________________________________________

User                          Auth  Priv

____                          ____  ____

admin                         md5   des

(EngineID 128:0:0:9:3:0:0:0:0:0:0)

vsnbetauser                   md5   des

(EngineID 128:0:0:9:3:0:0:0:0:0:0)

Related Commands


Command	Description
snmp-server	Configures the SNMP server.

show sockets

To display socket information, use the show sockets command.

show sockets {client | connection | internal | statistics | tcp}

Syntax Description


client	Displays client socket information.
connection	Displays socket connections information.
internal	Displays internal socket information.
statistics	Displays socket statistics.
tcp	Displays TCP information.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show sockets command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display socket statistics:

vsg# show sockets statistics

TCP Received:

        43556 packets total

        0 checksum error, 0 bad offset, 0 too short, 0 MD5 error

        33557 packets (1428824 bytes) in sequence

        435 duplicate packets (8296 bytes)

        0 partially dup packets (0 bytes)

        141 out-of-order packets (7736 bytes)

        0 packets (0 bytes) with data after window

        1 packets after close

        0 window probe packets, 0 window update packets

        470 duplicate ack packets, 0 ack packets with unsent data

        17669 ack packets (1759693 bytes)

TCP Sent:

        20950 total, 0 urgent packets

        20 control packets

        20057 data packets (1759592 bytes)

        5 data packets (736 bytes) retransmitted

        809 ack only packets

        0 window probe packets, 59 window update packets

TCP:

0 connections initiated, 129 connections accepted, 129 connections established

129 connections closed (including 107 dropped, 0 embryonic dropped)

4 total rxmt timeout, 0 connections dropped in rxmt timeout

40 keepalive timeout, 40 keepalive probe, 0 connections dropped in keepalive

Related Commands


Command	Description
show interface	Displays information about interfaces.

show ssh

To display secure shell (SSH) information, use the show ssh command.

show ssh {key | server}

Syntax Description


key	Displays the SSH keys.
server	Displays the status of SSH on the server.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show ssh command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display the SSH keys:

vsg# show ssh key

**************************************

rsa Keys generated:Fri May 8 16:49:02 2013

ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEAtL6+T2oK4lT1edlXus/eY6FChVxGdDA1T9B3pC06MWst

6+Wh4Sw3Ibpoe2uIuZE9qZjlNKLMWkReu1olXLCJlGG3QjkVUA2CMLYP6o/+fUoMZIPSyQFQk+3JwTFu

UR7uaa6OkATAr35unSnaHPKkYyv7C2S+I/H2nilY+Gbncv9D2tijsFJIOMIeIa8w5EdedMSnxOYg9ynm

9rV+Jql48mvslAKo23eSkzJT2grZu6z3d8DboiEHvrkPR/8Dwum9BXK7pM9p48l3Dae5lRuW92H/wRqs

v0u6Cyex6c6uE2f3jo4yU4tOMTCbyu2O+lXz/AsmM+gUZ1CvxrHhjgHpqw==

bitcount:2048

fingerprint:

1d:1f:75:3c:6b:41:32:c8:0a:87:40:56:10:cb:2b:e9

**************************************

could not retrieve dsa key information

**************************************

Related Commands


Command	Description
show telnet	Displays the Telnet server configuration.

show startup-config

To display startup configurations, use the show startup-config command.

Syntax Description


aaa	(Optional) Displays the authentication, authorization, and accounting (AAA) configuration.
adjmgr	(Optional) Displays the adjmgr information.
arp	(Optional) Displays Address Resolution Protocol (ARP) information.
bfd	(Optional) Displays the startup config for BFD.
cdp	(Optional) Displays the Cisco Discovery Protocol (CDP) configuration.
dhcp	(Optional) Displays the DHCP snoop configurations.
eem	(Optional) Displays the event manager startup configuration.
exclude	(Optional) Exclude the startup configuration of specified features.
exclude-provision	(Optional) Hide configuration for the offline pre-provisioned interfaces.
expand-port-profile	(Optional) Displays the port profile.
glbp	(Optional) Displays the GLBP startup configuration
icmpv6	(Optional) Displays Internet Control Message Protocol Version 6 (ICMPv6) information.
interface	(Optional) Displays interface configurations.
ip	(Optional) Displays IP information.
l3vm	(Optional) Displays Layer 3 Virtual Machine information.
log	(Optional) Displays the execution log of the latest ASCII startup configuration.
netflow	(Optional) Displays the NetFlow configuration.
network	(Optional) Displaysthe network information.
ntp	(Optional) Displays Network Time Protocol (NTP) information.
security	(Optional) Displays the security configuration.
snmp	(Optional) Displays the SNMP configuration.
vdc-all	(Optional) Displays the virtual device context (VDC) configuration.
vrf	(Optional) Displays the VRF information.
vrrp	(Optional) Displays the VRRP startup configuration.
vshd	(Optional) Displays the running configuration for VSHD.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show startup-config command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display the startup configuration:

vsg# show startup-config

Sap 106 returned failure code:0x80480002

!Command: show startup-config

!Time: Wed Feb 23 12:52:55 2013

!Startup config saved at: Tue Apr 30 19:23:55 2013

version 5.2.1VSG1(4.1)

ip domain-lookup

ip domain-lookup

switchname VSG129-2

snmp-server user admin auth md5 0x49381b1f90fcb52a70b55a0bbf05d032 priv 0x49381b

1f90fcb52a70b55a0bbf05d032 localizedkey engineID 128:0:0:9:3:0:0:0:0:0:0

snmp-server user vsnbetauser auth md5 0x272e8099cab7365fd1649d351b953884 priv 0x

272e8099cab7365fd1649d351b953884 localizedkey engineID 128:0:0:9:3:0:0:0:0:0:0

vrf context management

  ip route 0.0.0.0/0 10.193.72.1

vlan 1

port-channel load-balance ethernet source-mac

port-profile default max-ports 32

vdc VSG129-2 id 1

  limit-resource vlan minimum 16 maximum 2049

  limit-resource monitor-session minimum 0 maximum 2

  limit-resource vrf minimum 16 maximum 8192

  limit-resource port-channel minimum 0 maximum 768

  limit-resource u4route-mem minimum 32 maximum 32

  limit-resource u6route-mem minimum 16 maximum 16

  limit-resource m4route-mem minimum 58 maximum 58

  limit-resource m6route-mem minimum 8 maximum 8

interface mgmt0

  ip address 10.193.73.138/21

interface data0

  ip address 192.168.129.2/24

  ip address 192.168.129.2/24

interface data0

  ip address 192.168.129.2/24

  ip address 192.168.129.2/24

line console

boot kickstart bootflash:/ks.bin sup-1

boot system bootflash:/sys.bin sup-1

boot kickstart bootflash:/ks.bin sup-2

boot system bootflash:/sys.bin sup-2

  ha-pair id 1292

security-profile sp1

  policy p1

rule r1

  action 1 permit

policy p1

  rule r1 order 10

nsc-policy-agent

  registration-ip 0.0.0.0

  shared-secret **********

  log-level

Related Commands


Command	Description
show running-config	Displays the running configuration.

show system

To display system information, use the show system command.

show system {clis | cores | error-id | exception-info | inband | internal | pss | redundancy | resources | standby | uptime | vlan}

Syntax Description


clis	Displays the command-line interface (CLI) server.
cores	Displays the core transfer option.
error-id	Displays the descriptions for system errors.
exception-info	Displays the last exception log information.
inband	Displays the inband commands.
internal	Displays the commands for internal use.
pss	Displays the most recent PSS shrink status.
redundancy	Displays the redundancy status.
resources	Displays the system resources.
standby	Displays the system standby manual boot option.
uptime	Displays how long the system has been up and running.
vlan	Displays the VLAN status.

i

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show system command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display system resources:

vsg# show system resources

Load average:   1 minute: 0.22   5 minutes: 0.28   15 minutes: 0.12

Processes   :   245 total, 2 running

CPU states  :   0.0% user,   0.0% kernel,   100.0% idle

Memory usage:   1944668K total,   1041116K used,    903552K free

                  71456K buffers,  398416K cache

Related Commands


Command	Description
show hardware	Displays hardware information.

show tech-support

To display information about technical support, use the show tech-support command.

Syntax Description


adjmgr	(Optional) Displays adjacency manager information.
arp	(Optional) Displays Address Resolution Protocol (ARP) information.
bootvar	(Optional) Displays detailed information about boot variables.
bridge-domain	(Optional) Displays information for segmentaion troubleshooting.
brief	(Optional) Displays a system summary.
cert-enroll	(Optional) Displays certificate information.
cli	(Optional) Displays information about the parser.
clis	(Optional) Displays information about the command-line interface (CLI) server.
command	(Optional) Displays commands executed as part of show tech-support commands.
details	(Optional) Displays detailed information about troubleshooting.
dhcp	(Optional) Displays detailed information about Dynamic Host Configuration Protocol (DHCP).
eem	(Optional) Displays detailed information about EPP.
ethpm	(Optional) Displays detailed information for ETHPM troubleshooting.
ethport	(Optional) Displays detailed information about the Ethernet port.
ha	(Optional) Displays detailed information about high availability (HA).
icmpv6	(Optional) Displays information about ICMPv6.
im	(Optional) Displays detailed information about IM.
include-time	(Optional) Displays the time taken to gather technical support information.
internal	(Optional) Displays internal information for troubleshooting
ip	(Optional) Displays IP information.
ipv6	(Optional) Displays IPv6 information.
l3vm	(Optional) Display virtual routing and forwarding (VRF) information.
lacp	(Optional) Displays detailed information for LACP component.
npacl	(Optional) Displays information about NPACL.
ntp	(Optional) Displays information about the Network Time Protocol (NTP).
pktmgr	(Optional) Displays packet manager information.
port	(Optional) Displays port manager information.
port-channel	(Optional) Displays port-channel information.
routing	(Optional) Displays information about routing.
sal	(Optional) Displays SAL tech-support information.
smm	(Optional) Displays shared memory information.
snmp	(Optional) Displays information related for SNMP.
sockets	(Optional) Displays information about sockets.
span	(Optional) Displays detailed information for span troubleshooting.
supfile-sys	(Optional) Displays File-sys related issue.
svs	(Optional) Displays technical support information for SVS.
sysmgr	(Optional) Displays information about system manager.
vvlan	(Optional) Displays detailed information for Voice VLAN troubleshooting.
xml	(Optional) Displays information about XML.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show tech-support command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

When you execute a show command that displays a long list of data, you can press Ctrl-c at any time to exit that list.

Examples

This example shows how to display HA information:

VSG129-2# show tech-support ha

`show system internal sysmgr event-history msgs`

1) Event:E_MTS_RX, length:60, at 12198 usecs after Thu Feb 24 11:38:48 2013

    [REQ] Opc:MTS_OPC_SDWRAP_DEBUG_DUMP(1530), Id:0X02ECF618, Ret:SUCCESS

    Src:0x00000101/39469, Dst:0x00000101/3, Flags:None

    HA_SEQNO:0X00000000, RRtoken:0x02ECF618, Sync:UNKNOWN, Payloadsize:216

    Payload:

    0x0000:  01 00 2f 74 6d 70 2f 64 62 67 64 75 6d 70 31 32

2) Event:E_MTS_RX, length:44, at 952704 usecs after Thu Feb 24 11:38:47 2013

    [REQ] Opc:MTS_OPC_SYSMGR_ENNVAR_NON_SYSMGR_SRV_GET(2653), Id:0X02ECF601, Ret

:SUCCESS

    Src:0x00000101/39467, Dst:0x00000101/3, Flags:None

    HA_SEQNO:0X00000000, RRtoken:0x02ECF601, Sync:UNKNOWN, Payloadsize:0

3) Event:E_MTS_RX, length:44, at 504521 usecs after Thu Feb 24 11:38:39 2013

    [REQ] Opc:MTS_OPC_SYSMGR_ENNVAR_NON_SYSMGR_SRV_GET(2653), Id:0X02ECF494, Ret

:SUCCESS

    Src:0x00000101/39441, Dst:0x00000101/3, Flags:None

    HA_SEQNO:0X00000000, RRtoken:0x02ECF494, Sync:UNKNOWN, Payloadsize:0

4) Event:E_MTS_RX, length:60, at 824041 usecs after Thu Feb 24 11:38:18 2013

    [REQ] Opc:MTS_OPC_SYSMGR_CLI_SHOW_INTERNAL_STATE(1386), Id:0X02ECF0FB, Ret:S

UCCESS

    Src:0x00000101/39438, Dst:0x00000101/3, Flags:None

    HA_SEQNO:0X00000000, RRtoken:0x02ECF0FB, Sync:UNKNOWN, Payloadsize:624

    Payload:

    0x0000:  00 00 00 01 00 00 02 00 00 00 00 00 00 00 00 00

5) Event:E_MTS_RX, length:60, at 823997 usecs after Thu Feb 24 11:38:18 2013

    [REQ] Opc:MTS_OPC_SYSMGR_CLI_SHOW_REDUNDANCY_STATUS(2499), Id:0X02ECF0F9, Re

t:SUCCESS

    Src:0x00000101/39438, Dst:0x00000101/3, Flags:None

    HA_SEQNO:0X00000000, RRtoken:0x02ECF0F9, Sync:UNKNOWN, Payloadsize:112

    Payload:

    0x0000:  00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00

6) Event:E_MTS_RX, length:44, at 823918 usecs after Thu Feb 24 11:38:18 2013

    [REQ] Opc:MTS_OPC_SYSMGR_SCOPE_DONE(2476), Id:0X02ECF0F7, Ret:SUCCESS

    Src:0x00000101/39438, Dst:0x00000101/3, Flags:None

    HA_SEQNO:0X00000000, RRtoken:0x02ECF0F7, Sync:UNKNOWN, Payloadsize:0

7) Event:E_MTS_RX, length:60, at 819079 usecs after Thu Feb 24 11:38:18 2013

    [REQ] Opc:MTS_OPC_SYSMGR_CLI_SHOW_INTERNAL_STATE(1386), Id:0X02ECF0F5, Ret:S

UCCESS

    Src:0x00000101/39437, Dst:0x00000101/3, Flags:None

    HA_SEQNO:0X00000000, RRtoken:0x02ECF0F5, Sync:UNKNOWN, Payloadsize:624

    Payload:

    0x0000:  00 00 00 01 00 00 02 00 00 00 00 00 00 00 00 00

8) Event:E_MTS_RX, length:60, at 819034 usecs after Thu Feb 24 11:38:18 2013

    [REQ] Opc:MTS_OPC_SYSMGR_CLI_SHOW_REDUNDANCY_STATUS(2499), Id:0X02ECF0F3, Re

t:SUCCESS

    Src:0x00000101/39437, Dst:0x00000101/3, Flags:None

    HA_SEQNO:0X00000000, RRtoken:0x02ECF0F3, Sync:UNKNOWN, Payloadsize:112

    Payload:

    0x0000:  00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00

9) Event:E_MTS_RX, length:44, at 818960 usecs after Thu Feb 24 11:38:18 2013

    [REQ] Opc:MTS_OPC_SYSMGR_SCOPE_DONE(2476), Id:0X02ECF0F1, Ret:SUCCESS

    Src:0x00000101/39437, Dst:0x00000101/3, Flags:None

    HA_SEQNO:0X00000000, RRtoken:0x02ECF0F1, Sync:UNKNOWN, Payloadsize:0

10) Event:E_MTS_RX, length:60, at 814417 usecs after Thu Feb 24 11:38:18 2013

    [REQ] Opc:MTS_OPC_SYSMGR_CLI_SHOW_INTERNAL_STATE(1386), Id:0X02ECF0EF, Ret:S

UCCESS

    Src:0x00000101/39436, Dst:0x00000101/3, Flags:None

    HA_SEQNO:0X00000000, RRtoken:0x02ECF0EF, Sync:UNKNOWN, Payloadsize:624

    Payload:

    0x0000:  00 00 00 01 00 00 02 00 00 00 00 00 00 00 00 00

11) Event:E_MTS_RX, length:60, at 814364 usecs after Thu Feb 24 11:38:18 2013

    [REQ] Opc:MTS_OPC_SYSMGR_CLI_SHOW_REDUNDANCY_STATUS(2499), Id:0X02ECF0ED, Re

t:SUCCESS

    Src:0x00000101/39436, Dst:0x00000101/3, Flags:None

    HA_SEQNO:0X00000000, RRtoken:0x02ECF0ED, Sync:UNKNOWN, Payloadsize:112

    Payload:

    0x0000:  00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00

12) Event:E_MTS_RX, length:44, at 814283 usecs after Thu Feb 24 11:38:18 2013

    [REQ] Opc:MTS_OPC_SYSMGR_SCOPE_DONE(2476), Id:0X02ECF0EB, Ret:SUCCESS

    Src:0x00000101/39436, Dst:0x00000101/3, Flags:None

    HA_SEQNO:0X00000000, RRtoken:0x02ECF0EB, Sync:UNKNOWN, Payloadsize:0

13) Event:E_MTS_RX, length:44, at 800624 usecs after Thu Feb 24 11:38:18 2013

    [REQ] Opc:MTS_OPC_SYSMGR_ENNVAR_NON_SYSMGR_SRV_GET(2653), Id:0X02ECF0D3, Ret

:SUCCESS

    Src:0x00000101/39435, Dst:0x00000101/3, Flags:None

    HA_SEQNO:0X00000000, RRtoken:0x02ECF0D3, Sync:UNKNOWN, Payloadsize:0

14) Event:E_MTS_RX, length:48, at 37941 usecs after Thu Feb 24 11:37:00 2013

    [RSP] Opc:MTS_OPC_EEM_CFG_SYNC(1701), Id:0X02ECEAC3, Ret:SUCCESS

    Src:0x00000101/342, Dst:0x00000101/3, Flags:None

    HA_SEQNO:0X00000000, RRtoken:0x02ECEA4B, Sync:UNKNOWN, Payloadsize:4

    Payload:

    0x0000:  00 00 00 00

15) Event:E_MTS_RX, length:48, at 37931 usecs after Thu Feb 24 11:37:00 2013

    [RSP] Opc:MTS_OPC_EEM_CFG_SYNC(1701), Id:0X02ECEAC2, Ret:SUCCESS

    Src:0x00000101/342, Dst:0x00000101/3, Flags:None

    HA_SEQNO:0X00000000, RRtoken:0x02ECEA4A, Sync:UNKNOWN, Payloadsize:4

    Payload:

    0x0000:  00 00 00 00

16) Event:E_MTS_RX, length:48, at 37921 usecs after Thu Feb 24 11:37:00 2013

    [RSP] Opc:MTS_OPC_EEM_CFG_SYNC(1701), Id:0X02ECEAC1, Ret:SUCCESS

    Src:0x00000101/342, Dst:0x00000101/3, Flags:None

    HA_SEQNO:0X00000000, RRtoken:0x02ECEA49, Sync:UNKNOWN, Payloadsize:4

    Payload:

    0x0000:  00 00 00 00

17) Event:E_MTS_RX, length:48, at 37910 usecs after Thu Feb 24 11:37:00 2013

    [RSP] Opc:MTS_OPC_EEM_CFG_SYNC(1701), Id:0X02ECEAC0, Ret:SUCCESS

    Src:0x00000101/342, Dst:0x00000101/3, Flags:None

    HA_SEQNO:0X00000000, RRtoken:0x02ECEA48, Sync:UNKNOWN, Payloadsize:4

    Payload:

    0x0000:  00 00 00 00

18) Event:E_MTS_RX, length:48, at 37900 usecs after Thu Feb 24 11:37:00 2013

    [RSP] Opc:MTS_OPC_EEM_CFG_SYNC(1701), Id:0X02ECEABF, Ret:SUCCESS

    Src:0x00000101/342, Dst:0x00000101/3, Flags:None

    HA_SEQNO:0X00000000, RRtoken:0x02ECEA47, Sync:UNKNOWN, Payloadsize:4

    Payload:

    0x0000:  00 00 00 00

19) Event:E_MTS_RX, length:48, at 37890 usecs after Thu Feb 24 11:37:00 2013

    [RSP] Opc:MTS_OPC_EEM_CFG_SYNC(1701), Id:0X02ECEABE, Ret:SUCCESS

    Src:0x00000101/342, Dst:0x00000101/3, Flags:None

    HA_SEQNO:0X00000000, RRtoken:0x02ECEA46, Sync:UNKNOWN, Payloadsize:4

    Payload:

    0x0000:  00 00 00 00

20) Event:E_MTS_RX, length:48, at 37880 usecs after Thu Feb 24 11:37:00 2013

    [RSP] Opc:MTS_OPC_EEM_CFG_SYNC(1701), Id:0X02ECEABD, Ret:SUCCESS

    Src:0x00000101/342, Dst:0x00000101/3, Flags:None

    HA_SEQNO:0X00000000, RRtoken:0x02ECEA45, Sync:UNKNOWN, Payloadsize:4

    Payload:

    0x0000:  00 00 00 00

21) Event:E_MTS_RX, length:48, at 37870 usecs after Thu Feb 24 11:37:00 2013

    [RSP] Opc:MTS_OPC_EEM_CFG_SYNC(1701), Id:0X02ECEABC, Ret:SUCCESS

    Src:0x00000101/342, Dst:0x00000101/3, Flags:None

    HA_SEQNO:0X00000000, RRtoken:0x02ECEA44, Sync:UNKNOWN, Payloadsize:4

    Payload:

    0x0000:  00 00 00 00

22) Event:E_MTS_RX, length:48, at 37860 usecs after Thu Feb 24 11:37:00 2013

    [RSP] Opc:MTS_OPC_EEM_CFG_SYNC(1701), Id:0X02ECEABB, Ret:SUCCESS

    Src:0x00000101/342, Dst:0x00000101/3, Flags:None

    HA_SEQNO:0X00000000, RRtoken:0x02ECEA43, Sync:UNKNOWN, Payloadsize:4

    Payload:

    0x0000:  00 00 00 00

23) Event:E_MTS_RX, length:48, at 37850 usecs after Thu Feb 24 11:37:00 2013

    [RSP] Opc:MTS_OPC_EEM_CFG_SYNC(1701), Id:0X02ECEABA, Ret:SUCCESS

    Src:0x00000101/342, Dst:0x00000101/3, Flags:None

    HA_SEQNO:0X00000000, RRtoken:0x02ECEA42, Sync:UNKNOWN, Payloadsize:4

    Payload:

    0x0000:  00 00 00 00

24) Event:E_MTS_RX, length:48, at 37840 usecs after Thu Feb 24 11:37:00 2013

    [RSP] Opc:MTS_OPC_EEM_CFG_SYNC(1701), Id:0X02ECEAB9, Ret:SUCCESS

    Src:0x00000101/342, Dst:0x00000101/3, Flags:None

    HA_SEQNO:0X00000000, RRtoken:0x02ECEA41, Sync:UNKNOWN, Payloadsize:4

    Payload:

    0x0000:  00 00 00 00

25) Event:E_MTS_RX, length:48, at 37830 usecs after Thu Feb 24 11:37:00 2013

    [RSP] Opc:MTS_OPC_EEM_CFG_SYNC(1701), Id:0X02ECEAB8, Ret:SUCCESS

    Src:0x00000101/342, Dst:0x00000101/3, Flags:None

    HA_SEQNO:0X00000000, RRtoken:0x02ECEA40, Sync:UNKNOWN, Payloadsize:4

    Payload:

    0x0000:  00 00 00 00

26) Event:E_MTS_RX, length:48, at 37820 usecs after Thu Feb 24 11:37:00 2013

    [RSP] Opc:MTS_OPC_EEM_CFG_SYNC(1701), Id:0X02ECEAB7, Ret:SUCCESS

    Src:0x00000101/342, Dst:0x00000101/3, Flags:None

    HA_SEQNO:0X00000000, RRtoken:0x02ECEA3F, Sync:UNKNOWN, Payloadsize:4

    Payload:

    0x0000:  00 00 00 00

27) Event:E_MTS_RX, length:48, at 37808 usecs after Thu Feb 24 11:37:00 2013

    [RSP] Opc:MTS_OPC_EEM_CFG_SYNC(1701), Id:0X02ECEAB6, Ret:SUCCESS

    Src:0x00000101/342, Dst:0x00000101/3, Flags:None

    HA_SEQNO:0X00000000, RRtoken:0x02ECEA3E, Sync:UNKNOWN, Payloadsize:4

    Payload:

    0x0000:  00 00 00 00

Related Commands


Command	Description
show debug	Displays debug flags.

show telnet server

To display the status of Telnet services, use the show telnet server command.

show telnet server

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show telnet server command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display the status of Telnet services:

vsg# show telnet server

telnet service not enabled

vsg#

Related Commands


Command	Description
show http	Displays the status of HTTP services.

show terminal

To display information about the terminal, use the show terminal command.

show terminal [internal]

Syntax Description


internal	(Optional) Displays internal terminal information.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show terminal command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display information about the terminal:

VSG129-2# show terminal internal info

Process info:

Name:   vsh

State:  R (running)

SleepAVG:       88%

Tgid:   4157

Pid:    4157

PPid:   4156

TracerPid:      0

Uid:    2002    2002    2002    2002

Gid:    503     503     503     503

FDSize: 256

Groups: 503

VmSize:    31080 kB

VmLck:         0 kB

VmRSS:      9208 kB

VmData:     1140 kB

VmStk:        84 kB

VmExe:        44 kB

VmLib:     13664 kB

VmPTE:        48 kB

Threads:        1

SigPnd: 0000000000000000

ShdPnd: 0000000000000000

SigBlk: 0000001000000000

SigIgn: 0000000000300004

SigCgt: 0000000180007002

CapInh: 0000000000000000

CapPrm: 0000000000000000

CapEff: 0000000000000000

Memory limits:

core file size        (blocks, -c) 146484

data seg size         (kbytes, -d) unlimited

file size             (blocks, -f) unlimited

max locked memory     (kbytes, -l) unlimited

max memory size       (kbytes, -m) unlimited

open files                    (-n) 1024

pipe size          (512 bytes, -p) 8

stack size            (kbytes, -s) 8192

cpu time             (seconds, -t) unlimited

max user processes            (-u) unlimited

virtual memory        (kbytes, -v) 204800

Related Commands


Command	Description
show processes	Displays process information.

show user-account

To display information about user accounts, use the show user-account command.

show user-account [user-account-name]

Syntax Description


user-account-name	(Optional) User account name.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show user-account command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display user accounts:

vsg# show user-account

user:adminbackup

        this user account has no expiry date

        roles:

user:admin

        this user account has no expiry date

        roles:network-admin

user:vsnbetauser

        this user account has no expiry date

        roles:network-admin

Related Commands


Command	Description
show users	Displays current users.

show users

To display users, use the show users command.

show users

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show users command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display users:

vsg# show users

NAME     LINE         TIME         IDLE          PID COMMENT

admin    pts/0        Jan 21 17:19  old         3021 (171.69.17.61) session=ssh

admin    pts/29       Feb 23 11:13   .          4157 (10.21.145.11) session = ssh *

Related Commands


Command	Description
show user-account	Displays information about user accounts.

show version

To display the software version, use the show version command.

show version [image | internal]

Syntax Description


image	(Optional) Displays software image information.
internal	(Optional) Displays internal commands.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show version command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display software build information:

vsg# show version internal build-identifier

Related Commands


Command	Description
show install	Displays the software install impact between two images.

show nsc-pa

To display the Prime Network Services Controller (Prime NSC) policy agent, use the show nsc-pa command.

show nsc-pa [status | tech-support]

Syntax Description


status	(Optional) Displays the policy agent status.
tech-support	(Optional) Displays technical support information.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show nsc-pa command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display the policy agent status:

vsg# show nsc-pa status

NSC Policy-Agent status is - Not Installed

Related Commands


Command	Description
show vsg	Displays Cisco VSG information.

show vsg dvport

To display information about a Cisco VSG DV port, use the show vsg dvport command.

show vsg dvport [port-name]

Syntax Description


port-name	(Optional) DV port name.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show vsg dvport command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display information about a DV port:

vsg# show vsg dvport

DV Port          : 576::bcaa1c50-8747-8d08-fe7e-a9aa8924bf8e

Security Profile : spcustom

VM uuid          : 421c5ae4-51c3-5dd9-60fa-a50cb04ed0ea

Port Profile     : vm_data

IP Addresses :

    100.1.1.20

    100.1.1.10

Related Commands


Command	Description
show vsg ip-binding	Displays information about IP bindings.

show vsg ip-binding

To display a list of Virtual Machine (VM) IP addresses and associated virtual network security profile (VNSP) and policy sets, use the show vsg ip-binding command.

show vsg ip-binding

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show vsg ip-binding command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display a list of VM IP addresses:

vsg# show vsg ip-binding

-------------------------------------------------------------------------------

   VM IP address          Security-Profile Name           Policy Name

-------------------------------------------------------------------------------

 100.1.1.20         spcustom                            policy_one

 100.1.1.10         sp_new                              policy_one

Related Commands


Command	Description
show vsg security-profile	Displays information about security profiles.

show vsg security-profile

To display information about security profiles, use the show vsg security-profile command.

show vsg security-profile [vnsp-name | detail | table]

Syntax Description


vnsp-name	(Optional) Virtual network security profile (VNSP) name.
detail	(Optional) Displays more details about the Cisco VSG security profile.
table	(Optional) Displays security profile information.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show vsg security-profile command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

The detail version of the show vsg security-profile command includes the names of the Virtual Machines (VMs) that are using the security profile in addition to the information about the security profile. A VNSP name can be specified to get details of a specific security profile.

Examples

This example shows how to display detailed information about the security profile sp_deny@root:

vsg# show vsg security-profile sp_deny@root detail

   VNSP             : sp_deny@root

   VNSP id          : 5

   Policy Name      : ps_deny@root

   Policy id        : 3

   Custom attributes :

     Name           : vnsporg

     Value          : root

     Name           : profile1

     Value          : eng

   Virtual Machines:

     sg-pg-vm206

     sg-pg-redhat

Related Commands


Command	Description
show policy stats	Displays policy statistics.

show vsg vm

To display information about a Virtual Machine (VM), use the show vsg vm command.

show vsg vm

Syntax Description

This command has no arguments or keywords.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show vsg vm command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display information for the Cisco VSG VM:

vsn22# show vsg vm

VM uuid : c42067b5-4533-43c5-8f2f-a3766d4cff4e

VM attributes :

name : vm-11

os-fullname : windows server 2012 r2 datacenter

os-hostname : windows123

Zone(s) :

Related Commands


Command	Description
show vsg	Displays Cisco VSG information.

show vsg vm name

To display the name information about a Virtual Machine (VM), use the show vsg vm name command.

show vsg vm name name

Syntax Description


name	Name or partial name of a VM in your Cisco VSG network.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2(1)VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show vsg vm name command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

This command displays information for one or more Virtual machines (VMs). The VMs name should be specified as a parameter and can be a prefix (first few characters) or the entire name. The information for the VM includes details of each DV port used by the VM and zones that the VM belongs to.

Examples

This example shows how to display information for the Cisco VSG VM with the name vm-12:

vsg# show vsg vm name vm-12

VM uuid : 9452c024-7e5f-4b4d-a3e6-6db5a01ec987

VM attributes :

name : vm-12

os-fullname : windows server 2012 r2 datacenter

os-hostname : windows123

DV Port(s) :

DV Port : 9452c024-7e5f-4b4d-a3e6-6db5a01ec987--2575106b-0463-4be5

-aec2-0c58f5740e1c::542e5b16-694f-4bcb-ba2e-f7cb484cfc9b

Security Profile : default@root

Port Profile : pp-vm-vns2

IP Addresses :

80.1.0.53

Zone(s) :

Related Commands


Command	Description
show vsg	Displays Cisco VSG information.

show vsg vm uuid

To display the Cisco VSG virtual machine UUID, use the show vsg vm uuid command.

show vsg vm uuid uuid

Syntax Description


uuid	Designates the name of the UUID.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2(1)VSG1(4.1)	This command was introduced.

Usage Guidelines

This command requires the VM UUID as a parameter. Information for the specified VM is displayed.

Examples

This example shows how to display the Cisco VSG UUID information:

vsg# show vsg vm uuid 9452c024-7e5f-4b4d-a3e6-6db5a01ec987

VM uuid : 9452c024-7e5f-4b4d-a3e6-6db5a01ec987

VM attributes :

name : vm-12

os-fullname : windows server 2012 r2 datacenter

os-hostname : windows123

DV Port(s) :

DV Port : 9452c024-7e5f-4b4d-a3e6-6db5a01ec987--2575106b-0463-4be5

-aec2-0c58f5740e1c::542e5b16-694f-4bcb-ba2e-f7cb484cfc9b

Security Profile : default@root

Port Profile : pp-vm-vns2

IP Addresses :

80.1.0.53

Zone(s) :

Related Commands


Command	Description
show vsg	Displays Cisco VSG information.

show vsg zone

To display the Cisco VSG zones, use the show vsg zone command.

show vsg zone

Syntax Description

This command has no keywords or arguments.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2(1)VSG1(4.1)	This command was introduced.

Examples

This example shows how to display Cisco VSG zones:

vsg(config-nsc-policy-agent)# show vsg zone

Zone : vzone2@root/T1

Virtual Machines :

--------------------------------------------------------------------------------

Zone : zone1@root/T1

Virtual Machines :

--------------------------------------------------------------------------------

Related Commands


Command	Description
show vsg	Displays Cisco VSG information.

show xml server

To display XML server information, use the show xml server command.

show xml server [internal | logging | status]

Syntax Description


internal	(Optional) Displays the commands for internal use.
logging	(Optional) Displays the logging configuration and the contents of the log file.
status	(Optional) Displays XML agent information.

Defaults

None

Command Modes

EXEC

Global configuration (config)

Supported User Roles

network-admin

network-operator

Command History


Release	Modification
5.2.1VSG1(4.1)	This command was introduced.

Usage Guidelines

You can use the following operators with the show xml server command:

•>—Redirects the output to a file.

•>>—Redirects the output to a file in append mode.

•|—Pipes the command output to a filter.

Examples

This example shows how to display XML server information:

vsg# show xml server status

 operational status is enabled

 maximum session configured is 8

Related Commands


Command	Description
show http-server	Displays the HTTP server configuration.

Bias-Free Language

Results

Chapter: Cisco Virtual Security Gateway Show Commands

Cisco Virtual Security Gateway Show Commands

show aaa

Syntax Description

Defaults

Command Modes

Command History

Usage Guidelines

Examples

Related Commands

show ac-driver

Syntax Description

Defaults

Command Modes

Command History

Usage Guidelines

Examples

Related Commands

show accounting

Syntax Description

Defaults

Command Modes

Command History

Usage Guidelines

Examples

Related Commands

show banner

Syntax Description

Defaults

Command Modes

Command History

Usage Guidelines

Examples

Related Commands

show boot

Syntax Description

Defaults

Command Modes

Command History

Usage Guidelines

Examples

Related Commands

show cdp

Syntax Description

Defaults

Command Modes

Command History

Usage Guidelines

Examples

Related Commands

show cli

Syntax Description

Defaults

Command Modes

Command History

Usage Guidelines

Examples

Related Commands

show clock

Syntax Description

Defaults

Command Modes

Command History

Usage Guidelines

Examples

Related Commands

show copyright

Syntax Description

Defaults

Command Modes

Command History

Usage Guidelines

Examples

Related Commands

show cores

Syntax Description

Defaults