Restrictions for CoPP
Restrictions for control plane policing (CoPP) include the following:
-
Only ingress CoPP is supported. The system-cpp-policy policy-map is available on the control plane interface, and only in the ingress direction. 

-
Only the system-cpp-policy policy-map can be installed on the control plane interface.
-
The system-cpp-policy policy-map and the system-defined classes cannot be modified or deleted.
-
Only the police action is allowed under the system-cpp-policy policy-map. The police rate for system-defined classes must be configured only in packets per second (pps); for user-defined class maps this must be configured only in bits per second (bps).
-
One or more CPU queues are part of each class-map. Where multiple CPU queues belong to one class-map, changing the policer rate of a class-map affects all CPU queues that belong to that class-map. Similarly, disabling the policer in a class-map disables all queues that belong to that class-map. See Table 1 for information about which CPU queues belong to each class-map.
-
The show run command does not display information about classes configured under
system-cpp policy
, when they are left at default values. Use the show policy-map system-cpp-policy or the show policy-map control-plane commands instead.You can continue use the show run command to display information about custom policies.