- Index
- Preface
- Overview
- Using the Command-Line Interface
- Getting Started with CMS
- Assigning the Switch IP Address and Default Gateway
- Managing Switch Stacks
- Clustering Switches
- Administering the Switch
- Configuring SDM Templates
- Configuring Switch-Based Authentication
- Configuring 802.1X Port-Based Authentication
- Configuring Interface Characteristics
- Configuring SmartPort Macros
- Configuring VLANs
- Configuring VTP
- Configuring Voice VLAN
- Configuring STP
- Configuring MSTP
- Configuring Optional Spanning-Tree Features
- Configuring DHCP Features
- Configuring IGMP Snooping and MVR
- Configuring Port-Based Traffic Control
- Configuring CDP
- Configuring UDLD
- Configuring SPAN and RSPAN
- Configuring RMON
- Configuring System Message Logging
- Configuring SNMP
- Configuring Network Security with ACLs
- Configuring QoS
- Configuring EtherChannels
- Configuring IP Unicast Routing
- Configuring HSRP
- Configuring IP Multicast Routing
- Configuring MSDP
- Configuring Fallback Bridging
- Troubleshooting
- Supported MIBs
- Working with the Cisco IOS File System, Configuration Files, and Software Images
- Unsupported Commands in Cisco IOS Release 12.1(19)EA1
Supported MIBs
This appendix lists the supported management information base (MIBs) for this release on the Catalyst 3750 switch. It contains these sections:
•Using FTP to Access the MIB Files
MIB List
•BRIDGE-MIB (RFC1493)
Note The BRIDGE-MIB supports the context of a single VLAN. By default, SNMP messages using the configured community string always provide information for VLAN 1. To obtain the BRIDGE-MIB information for other VLANs, for example VLAN x, use this community string in the SNMP message: configured community string @x.
•CISCO-CDP-MIB
•CISCO-CLUSTER-MIB
•CISCO-CONFIG-COPY-MIB
•CISCO-CONFIG-MAN-MIB
•CISCO-ENTITY-FRU-CONTROL-MIB
•CISCO-ENVMON-MIB
•CISCO-FLASH-MIB (Flash memory on all switches is modeled as removable flash memory.)
•CISCO-FTP-CLIENT-MIB
•CISCO-HSRP-MIB
•CISCO-HSRP-EXT-MIB (partial support)
•CISCO-IGMP-FILTER-MIB
•CISCO-IMAGE-MIB (Only stack master image details are shown.)
•CISCO IP-STAT-MIB
•CICSO-L2L3-INTERFACE-MIB
•CISCO-LACP-MIB
•CISCO-MAC-NOTIFICATION-MIB
•CISCO-MEMORY-POOL-MIB (Only stack master image details are shown.)
•CISCO-PAGP-MIB
•CISCO-PING-MIB
•CISCO-PROCESS-MIB (Only stack master details are shown.)
•CISCO-RTTMON-MIB
•CISCO-STACK-MIB (Partial support: for some objects, only stack master information is supported. ENTITY MIB is a better alternative.)
•CISCO-STACKMAKER-MIB
•CISCO-STP-EXTENSIONS-MIB
•CISCO-SYSLOG-MIB
•CISCO-TCP-MIB
•CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB
•CISCO-VLAN-MEMBERSHIP-MIB
•CISCO-VTP-MIB
•ENTITY-MIB
•ETHERLIKE_MIB
•IEEE8023-LACP-MIB
•IF-MIB (In and out counters for VLANs are not supported.)
•IGMP-MIB
•IPMROUTE-MIB
•OLD-CISCO-CHASSIS-MIB (Partial support; some objects reflect only the stack master.)
•OLD-CISCO-FLASH-MIB (Supports only the stack master. Use CISCO-FLASH_MIB.)
•OLD-CISCO-INTERFACES-MIB
•OLD-CISCO-IP-MIB
•OLD-CISCO-SYS-MIB
•OLD-CISCO-TCP-MIB
•OLD-CISCO-TS-MIB
•PIM-MIB
•RFC1213-MIB (Functionality is as per the agent capabilities specified in the CISCO-RFC1213-CAPABILITY.my.)
•RFC1253-MIB (OSPF-MIB)
•RMON-MIB
•RMON2-MIB
•SNMP-FRAMEWORK-MIB
•SNMP-MPD-MIB
•SNMP-NOTIFICATION-MIB
•SNMP-TARGET-MIB
•SNMPv2-MIB
•TCP-MIB
•UDP-MIB
Note You can also use this URL for a list of supported MIBs for the Catalyst 3750 switch:
ftp://ftp.cisco.com/pub/mibs/supportlists/cat3750/cat3750-supportlist.html
You can access other information about MIBs and Cisco products on the Cisco web site:
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml
Using FTP to Access the MIB Files
You can obtain each MIB file by using this procedure:
Step 1 Use FTP to access the server ftp.cisco.com.
Step 2 Log in with the username anonymous.
Step 3 Enter your e-mail username when prompted for the password.
Step 4 At the ftp>
prompt, change directories to /pub/mibs/v1 and /pub/mibs/v2.
Step 5 Use the get MIB_filename command to obtain a copy of the MIB file.