The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
A
aaa accounting dot1x command 2-1
aaa authentication dot1x command 2-3
AAA methods 2-3
abort command 2-652
access control entries
access control lists
access groups
IP 2-118
MAC, displaying 2-420
access map configuration mode 2-201
access mode 2-595
access ports 2-595
ACLs
deny 2-79
displaying 2-310
for non-IP protocols 2-183
IP 2-118
matching 2-201
on Layer 2 interfaces 2-118
permit 2-261
action command 2-5
address aliasing 2-250
aggregate-port learner 2-255
allowed VLANs 2-615
apply command 2-652
archive copy-sw command 2-7
archive download-sw command 2-10
archive tar command 2-14
archive upload-sw command 2-17
arp access-list command 2-19
audience xvii
authorization state of controlled port 2-95
autonegotiation of duplex mode 2-103
auto qos voip command 2-21
B
BackboneFast, for STP 2-523
backup interfaces
configuring 2-591
displaying 2-372
boot (boot loader) command A-2
boot auto-copy-sw command 2-26
boot boothlpr command 2-27
boot config-file command 2-28
boot enable-break command 2-29
boot helper command 2-30
boot helper-config file command 2-31
booting
Cisco IOS image 2-34
displaying environment variables 2-320
interrupting 2-29
manually 2-32
boot loader
accessing A-1
booting
Cisco IOS image A-2
helper image 2-30
directories
creating A-16
displaying a list of A-7
removing A-20
displaying
available commands A-12
memory heap utilization A-14
version A-27
environment variables
described A-21
displaying settings A-21
location of A-22
setting A-21
unsetting A-25
files
copying A-5
deleting A-6
displaying a list of A-7
displaying the contents of A-4, A-17, A-24
renaming A-18
file system
formatting A-10
initializing flash A-9
running a consistency check A-11
loading helper images A-13
prompt A-1
resetting the system A-19
boot manual command 2-32
boot private-config-file command 2-33
boot system command 2-34
BPDU filtering, for spanning tree 2-524, 2-559
BPDU guard, for spanning tree 2-526, 2-559
broadcast storm control 2-579
C
candidate switches
cat (boot loader) command A-4
caution, description xviii
CDP, enabling protocol tunneling for 2-170
channel-group command 2-36
channel-protocol command 2-40
Cisco Network Assistant
See Network Assistant xviii
Cisco SoftPhone
auto-QoS configuration 2-21
trusting packets sent from 2-241
class command 2-41
class-map command 2-43
class maps
creating 2-43
defining the match criteria 2-203
displaying 2-325
class of service
clear ip arp inspection log command 2-45
clear ip arp inspection statistics command 2-46
clear ipc command 2-48
clear ip dhcp snooping database command 2-47
clear l2protocol-tunnel counters command 2-49
clear lacp command 2-50
clear mac address-table command 2-51
clear pagp command 2-53
clear port-security command 2-54
clear spanning-tree counters command 2-56
clear spanning-tree detected-protocols command 2-57
clear vmps statistics command 2-58
clear vtp counters command 2-59
cluster commander-address command 2-60
cluster discovery hop-count command 2-62
cluster enable command 2-63
cluster holdtime command 2-65
cluster member command 2-66
cluster outside-interface command 2-68
cluster requirements xviii
cluster run command 2-69
clusters
adding candidates 2-66
binding to HSRP group 2-70
building manually 2-66
communicating with
devices outside the cluster 2-68
members by using Telnet 2-284
debug messages, display B-4
displaying
candidate switches 2-328
debug messages B-4
member switches 2-330
status 2-326
hop-count limit for extended discovery 2-62
HSRP standby groups 2-70
redundancy 2-70
SNMP trap 2-513
cluster standby-group command 2-70
cluster timer command 2-72
command modes defined 1-2
commands changed in Cisco IOS Release 12.2(18)SE 1-6
command switch
configuration, initial
See getting started guide and hardware installation guide
configuration files
password recovery disable considerations A-1
specifying the name 2-28, 2-33
configuring multiple interfaces 2-113
config-vlan mode
commands 2-638
description 1-4
entering 2-637
summary 1-2
conventions
command xviii
for examples xviii
publication xviii
text xviii
copy (boot loader) command A-5
CoS
assigning default value to incoming packets 2-211
assigning to Layer 2 protocol packets 2-173
overriding the incoming value 2-211
CoS-to-DSCP map 2-215
CPU ASIC statistics, displaying 2-332
D
debug auto qos command B-2
debug cluster command B-4
debug dot1x command B-6
debug dtp command B-8
debug etherchannel command B-9
debug ilpower command B-11
debug interface command B-14
debug ip dhcp snooping command B-12
debug ip igmp filter command B-16
debug ip igmp max-groups command B-17
debug ip igmp snooping command B-18
debug ip verify source packet command B-13
debug lacp command B-19
debug mac-notification command B-20
debug matm command B-21
debug monitor command B-22
debug mvrdbg command B-24
debug nvram command B-25
debug pagp command B-26
debug platform acl command B-27
debug platform cli-redirection main command B-28
debug platform configuration command B-29, B-37
debug platform cpu-queues command B-30
debug platform device-manager command B-32
debug platform dot1x command B-33
debug platform etherchannel command B-34
debug platform fallback-bridging command B-35
debug platform forw-tcam command B-36
debug platform ip arp inspection command B-39
debug platform ipc command B-47
debug platform ip dhcp command B-40
debug platform ip igmp snooping command B-41
debug platform ip multicast command B-43
debug platform ip unicast command B-45
debug platform led command B-48
debug platform matm command B-49
debug platform messaging application command B-51
debug platform phy command B-53
debug platform pm command B-55
debug platform port-asic command B-57
debug platform port-security command B-58
debug platform qos-acl-tcam command B-59
debug platform remote-commands command B-60
debug platform resource-manager command B-61
debug platform snmp command B-62
debug platform span command B-63
debug platform stack-manager command B-64
debug platform supervisor-asic command B-65
debug platform sw-bridge command B-66
debug platform tcam command B-67
debug platform udld command B-70
debug platform vlan command B-71
debug pm command B-72
debug port-security command B-74
debug qos-manager command B-75
debug spanning-tree backbonefast command B-78
debug spanning-tree bpdu command B-79
debug spanning-tree bpdu-opt command B-80
debug spanning-tree command B-76
debug spanning-tree mstp command B-81
debug spanning-tree switch command B-83
debug spanning-tree uplinkfast command B-85
debug sw-vlan command B-86
debug sw-vlan ifs command B-88
debug sw-vlan notification command B-90
debug sw-vlan vtp command B-92
debug udld command B-94
debug vqpc command B-96
define interface-range command 2-73
delete (boot loader) command A-6
delete command 2-75
deny (ARP access-list configuration) command 2-77
deny command 2-79
detect mechanism, causes 2-104
device manager requirements xviii
DHCP snooping
accepting untrusted packets from edge switch 2-143
enabling
on a VLAN 2-148
trust on an interface 2-146
error recovery timer 2-106
rate limiting 2-145
DHCP snooping binding database
binding file, configuring 2-139
bindings
adding 2-137
deleting 2-137
displaying 2-390
clearing database agent statistics 2-47
database agent, configuring 2-139
displaying
binding entries 2-390
database agent status 2-393
renewing 2-291
dir (boot loader) command A-7
directories, deleting 2-75
documentation, related xviii
document conventions xviii
dot1x command 2-82
dot1x control-direction command 2-84
dot1x default command 2-86
dot1x guest-vlan command 2-87
dot1x host-mode command 2-89
dot1x initialize command 2-91
dot1x max-req command 2-92, 2-93
dot1x multiple-hosts command 2-94
dot1x port-control command 2-95
dot1x re-authenticate command 2-97
dot1x re-authentication command 2-98
dot1x reauthentication command 2-99
dot1x timeout command 2-100
dropping packets, with ACL matches 2-5
drop threshold, Layer 2 protocol tunneling 2-170
DSCP-to-CoS map 2-215
DSCP-to-DSCP-mutation map 2-215
DTP 2-596
DTP flap
error detection for 2-104
error recovery timer 2-106
DTP negotiation 2-600
duplex command 2-102
dynamic-access ports
configuring 2-589
restrictions 2-590
dynamic ARP inspection
ARP ACLs
apply to a VLAN 2-123
define 2-19
deny packets 2-77
display 2-315
permit packets 2-259
clear
log buffer 2-45
statistics 2-46
display
ARP ACLs 2-315
configuration and operating state 2-385
log buffer 2-385
statistics 2-385
trust state and rate limit 2-385
enable per VLAN 2-133
error detection for 2-104
error recovery timer 2-106
dynamic ARP inspection (continued)
log buffer
clear 2-45
configure 2-127
display 2-385
rate-limit incoming ARP packets 2-125
statistics
clear 2-46
display 2-385
trusted interface state 2-129
type of packet logged 2-134
validation checks 2-131
dynamic auto VLAN membership mode 2-595
dynamic desirable VLAN membership mode 2-595
Dynamic Host Configuration Protocol (DHCP)
Dynamic Trunking Protocol
E
EAP-request/identity frame
maximum number to send 2-93
response time before retransmitting 2-100
encapsulation methods 2-615
environment variables, displaying 2-320
errdisable detect cause command 2-104
errdisable recovery command 2-106
error conditions, displaying 2-361
error disable detection 2-104
error-disabled interfaces, displaying 2-372
EtherChannel
assigning Ethernet interface to channel group 2-36
creating port-channel logical interface 2-111
debug EtherChannel/PAgP, display B-9
debug platform-specific events, display B-34
displaying 2-365
EtherChannel (continued)
enabling Layer 2 protocol tunneling for
LACP 2-171
PAgP 2-171
UDLD 2-171
interface information, displaying 2-372
LACP
clearing channel-group information 2-50
debug messages, display B-19
displaying 2-416
modes 2-36
port priority for hot-standby ports 2-174
restricting a protocol 2-40
system priority 2-176
load-distribution methods 2-271
PAgP
aggregate-port learner 2-255
clearing channel-group information 2-53
debug messages, display B-26
displaying 2-463
error detection for 2-104
error recovery timer 2-106
learn method 2-255
modes 2-36
physical-port learner 2-255
priority of interface for transmitted traffic 2-257
Ethernet controller, internal register display 2-334
Ethernet statistics, collecting 2-293
examples, conventions for xviii
exit command 2-652
extended discovery of candidate switches 2-62
extended-range VLANs
and allowed VLAN list 2-615
and pruning-eligible list 2-615
configuring 2-637
extended system ID for STP 2-532
F
fan information, displaying 2-356
file name, VTP 2-662
files, deleting 2-75
flash_init (boot loader) command A-9
Flex Links
configuring 2-591
displaying 2-372
flowcontrol command 2-109
format (boot loader) command A-10
forwarding packets, with ACL matches 2-5
forwarding results, display C-6
frame forwarding information, displaying C-6
front-end controller
counter and status information C-8
fsck (boot loader) command A-11
G
global configuration mode 1-2, 1-4
H
hardware ACL statistics 2-310
help (boot loader) command A-12
hierarchical policy maps 2-269
hop-count limit for clusters 2-62
host connection, port configuration 2-594
host ports, private VLANs 2-598
Hot Standby Router Protocol
HSRP
binding HSRP group to cluster 2-70
standby group 2-70
I
IEEE 802.1Q trunk ports and native VLANs 2-654
IEEE 802.1Q tunnel ports
configuring 2-595
displaying 2-349
limitations 2-596
IEEE 802.1x
and switchport modes 2-596
violation error recovery 2-106
See also port-based authentication
IGMP filters
applying 2-149
debug messages, display B-16
IGMP groups, setting maximum 2-150
IGMP maximum groups, debugging B-17
IGMP profiles
creating 2-152
displaying 2-395
IGMP snooping
displaying 2-396, 2-399, 2-403
enabling 2-154
enabling the configurable-leave timer 2-157
querier 2-159
report suppression 2-161
images
Immediate-Leave feature, MVR 2-252
Immediate-Leave processing 2-154
initial configuration
See getting started guide and hardware installation guide
interface configuration mode 1-2, 1-4
interface port-channel command 2-111
interface range command 2-113
interface-range macros 2-73
interfaces
assigning Ethernet interface to channel group 2-36
configuring 2-102
configuring multiple 2-113
creating port-channel logical 2-111
debug messages, display B-14
disabling 2-511
displaying the MAC address table 2-432
restarting 2-511
interface speed, configuring 2-569
interface vlan command 2-116
internal registers, displaying 2-334, 2-345
Internet Group Management Protocol
invalid GBIC
error detection for 2-104
error recovery timer 2-106
ip access-group command 2-118
ip address command 2-121
IP addresses, setting 2-121
IP address matching 2-201
ip arp inspection filter vlan command 2-123
ip arp inspection limit command 2-125
ip arp inspection log-buffer command 2-127
ip arp inspection trust command 2-129
ip arp inspection validate command 2-131
ip arp inspection vlan command 2-133
ip arp inspection vlan logging command 2-134
IP DHCP snooping
ip dhcp snooping binding command 2-137
ip dhcp snooping command 2-136
ip dhcp snooping database command 2-139
ip dhcp snooping information option allow-untrusted command 2-143
ip dhcp snooping information option command 2-141
ip dhcp snooping limit rate command 2-145
ip dhcp snooping trust command 2-146
ip dhcp snooping verify command 2-147
ip dhcp snooping vlan command 2-148
ip igmp filter command 2-149
ip igmp max-groups command 2-150
ip igmp profile command 2-152
ip igmp snooping command 2-154
ip igmp snooping querier command 2-159
ip igmp snooping report-suppression command 2-161
ip igmp snooping vlan last-member-query-interval command 2-157
IP multicast addresses 2-249
IP phones
auto-QoS configuration 2-21
trusting packets sent from 2-241
IP-precedence-to-DSCP map 2-215
ip snap forwarding command 2-163
ip source binding command 2-164
IP source guard
disabling 2-168
displaying
binding entries 2-405
configuration 2-407
dynamic binding entries only 2-390
enabling 2-168
static IP source bindings 2-164
ip ssh command 2-166
IPv6 SDM template 2-294
ip verify source command 2-168
J
jumbo frames
L
l2protocol-tunnel command 2-170
l2protocol-tunnel cos command 2-173
LACP
lacp port-priority command 2-174
lacp system-priority command 2-176
Layer 2 mode, enabling 2-587
Layer 2 protocol ports, displaying 2-413
Layer 2 protocol-tunnel
error detection for 2-104
error recovery timer 2-106
Layer 2 protocol tunnel counters 2-49
Layer 2 protocol tunneling error recovery 2-171
Layer 2 traceroute
IP addresses 2-628
MAC addresses 2-625
Layer 3 mode, enabling 2-587
line configuration mode 1-3, 1-5
Link Aggregation Control Protocol
link flap
error detection for 2-104
error recovery timer 2-106
load_helper (boot loader) command A-13
load-distribution methods for EtherChannel 2-271
logging event power-inline-status command 2-178
logging file command 2-179
logical interface 2-111
loopback error
detection for 2-104
recovery timer 2-106
loop guard, for spanning tree 2-534, 2-538
M
mac access-group command 2-181
MAC access-groups, displaying 2-420
MAC access list configuration mode 2-183
mac access-list extended command 2-183
MAC access lists 2-79
MAC addresses
displaying
aging time 2-426
all 2-424
dynamic 2-430
notification settings 2-434
number of addresses in a VLAN 2-428
per interface 2-432
per VLAN 2-438
static 2-436
static and dynamic entries 2-422
dynamic
aging time 2-185
deleting 2-51
displaying 2-430
enabling MAC address notification 2-186
matching 2-201
persistent stack 2-577
static
adding and removing 2-188
displaying 2-436
dropping on an interface 2-189
tables 2-424
MAC address notification, debugging B-20
mac address-table aging-time 2-181, 2-201
mac address-table aging-time command 2-185
mac address-table notification command 2-186
mac address-table static command 2-188
mac address-table static drop command 2-189
macro apply command 2-191
macro description command 2-194
macro global command 2-195
macro global description command 2-198
macro name command 2-199
macros
adding a description 2-194
adding a global description 2-198
applying 2-195
creating 2-199
displaying 2-465
specifying parameter values 2-195
tracing 2-195
manual
audience xvii
purpose of xvii
maps
QoS
defining 2-215
displaying 2-448
VLAN
creating 2-649
defining 2-201
displaying 2-502
match (access-map configuration) command 2-201
match (class-map configuration) command 2-203
maximum transmission unit
mdix auto command 2-205
member switches
memory (boot loader) command A-14
mkdir (boot loader) command A-16
mls qos aggregate-policer command 2-209
mls qos command 2-207
mls qos cos command 2-211
mls qos dscp-mutation command 2-213
mls qos map command 2-215
mls qos queue-set output buffers command 2-219
mls qos queue-set output threshold command 2-221
mls qos rewrite ip dscp command 2-223
mls qos srr-queue input bandwidth command 2-225
mls qos srr-queue input buffers command 2-227
mls qos-srr-queue input cos-map command 2-229
mls qos srr-queue input dscp-map command 2-231
mls qos srr-queue input priority-queue command 2-233
mls qos srr-queue input threshold command 2-235
mls qos-srr-queue output cos-map command 2-237
mls qos srr-queue output dscp-map command 2-239
mls qos trust command 2-241
mls qos vlan-based command 2-243
mode, MVR 2-249
Mode button, and password recovery 2-298
modes, commands 1-2
monitor session command 2-244
more (boot loader) command A-17
MSTP
displaying 2-481
interoperability 2-57
link type 2-536
MST region
aborting changes 2-542
applying changes 2-542
configuration name 2-542
configuration revision number 2-542
current or pending display 2-542
displaying 2-481
MST configuration mode 2-542
VLANs-to-instance mapping 2-542
path cost 2-544
protocol mode 2-540
restart protocol migration process 2-57
root port
loop guard 2-534
preventing from becoming designated 2-534
restricting which can be root 2-534
root guard 2-534
root switch
affects of extended system ID 2-532
interval between BDPU messages 2-548
interval between hello BPDU messages 2-547, 2-555
max-age 2-548
maximum hop count before discarding BPDU 2-549
port priority for selection of 2-551
root switch (continued)
primary or secondary 2-555
switch priority 2-554
state changes
blocking to forwarding state 2-561
enabling BPDU filtering 2-524, 2-559
enabling BPDU guard 2-526, 2-559
enabling Port Fast 2-559, 2-561
forward-delay time 2-546
length of listening and learning states 2-546
rapid transition to forwarding 2-536
shutting down Port Fast-enabled ports 2-559
state information display 2-480
MTU
configuring size 2-622
displaying global setting 2-491
multicast group address, MVR 2-252
multicast groups, MVR 2-250
multicast router learning method 2-154
multicast router ports, configuring 2-154
multicast storm control 2-579
multicast VLAN, MVR 2-249
multicast VLAN registration
multiple hosts on authorized port 2-89
Multiple Spanning Tree Protocol
MVR
and address aliasing 2-250
configuring 2-249
configuring interfaces 2-252
debug messages, display B-24
displaying 2-457
displaying interface information 2-459
members, displaying 2-461
mvr (global configuration) command 2-249
mvr (interface configuration) command 2-252
mvr vlan group command 2-253
N
native VLANs 2-615
native VLAN tagging 2-654
Network Assistant requirements xviii
nonegotiate
DTP messaging 2-600
speed 2-569
nonegotiate, speed 2-569
non-IP protocols
denying 2-79
forwarding 2-261
non-IP traffic access lists 2-183
non-IP traffic forwarding
denying 2-79
permitting 2-261
normal-range VLANs 2-637, 2-643
note, description xviii
P
PAgP
pagp learn-method command 2-255
pagp port-priority command 2-257
password-recovery mechanism, enabling and disabling 2-298
permit (ARP access-list configuration) command 2-259
permit (MAC access-list configuration) command 2-261
per-VLAN spanning-tree plus
physical-port learner 2-255
PID, displaying 2-384
PIM-DVMRP, as multicast router learning method 2-154
PoE
configuring the power management mode 2-273
displaying controller register values 2-342
displaying power management information 2-473
logging of status 2-178
police aggregate command 2-266
police command 2-264
policed-DSCP map 2-215
policy-map command 2-268
policy maps
applying to an interface 2-300, 2-305
creating 2-268
displaying 2-468
hierarchical 2-269
policers
displaying 2-441
for a single class 2-264
for multiple classes 2-209, 2-266
policed-DSCP map 2-215
traffic classification
defining the class 2-41
defining trust states 2-630
setting DSCP or IP precedence values 2-303
Port Aggregation Protocol
port-based authentication
AAA method list 2-3
debug messages, display B-6
enabling IEEE 802.1x
globally 2-82
per interface 2-95
guest VLAN 2-87
host modes 2-89
IEEE 802.1x AAA accounting methods 2-1
initialize an interface 2-91
manual control of authorization state 2-95
multiple hosts on authorized port 2-89
periodic re-authentication
enabling 2-99
time between attempts 2-100
quiet period between failed authentication exchanges 2-100
re-authenticating IEEE 802.1x-enabled ports 2-97
resetting configurable IEEE 802.1x parameters 2-86
switch-to-authentication server retransmission time 2-100
switch-to-client frame-retransmission number 2-92 to 2-93
switch-to-client retransmission time 2-100
port-channel load-balance command 2-271
Port Fast, for spanning tree 2-561
port ranges, defining 2-73
ports, debugging B-72
ports, protected 2-613
port security
aging 2-607
debug messages, display B-74
enabling 2-602
violation error recovery 2-106
port trust states for QoS 2-241
port types, MVR 2-252
power information, displaying 2-356
power inline command 2-273
Power over Ethernet
priority-queue command 2-276
priority value, stack member 2-488, 2-582
private-vlan command 2-278
private-vlan mapping command 2-281
private VLANs
association 2-611
configuring 2-278
configuring ports 2-598
displaying 2-497
host ports 2-598
private VLANs (continued)
mapping
configuring 2-611
displaying 2-372
promiscuous ports 2-598
product identification information, displaying 2-384
promiscuous ports, private VLANs 2-598
protected ports, displaying 2-378
pruning
VLANs 2-615
VTP
displaying interface information 2-372
pruning-eligible VLAN list 2-617
PVST+
Q
QoS
auto-QoS
configuring 2-21
debug messages, display 1-6, B-2
displaying 2-316
class maps
creating 2-43
defining the match criteria 2-203
displaying 2-325
defining the CoS value for an incoming packet 2-211
displaying configuration information 2-316, 2-440
DSCP transparency 2-223
DSCP trusted ports
applying DSCP-to-DSCP-mutation map to 2-213
defining DSCP-to-DSCP-mutation map 2-215
egress queues
allocating buffers 2-219
defining the CoS output queue threshold map 2-237
defining the DSCP output queue threshold map 2-239
displaying buffer allocations 2-444
displaying CoS output queue threshold map 2-448
displaying DSCP output queue threshold map 2-448
displaying queueing strategy 2-444
displaying queue-set settings 2-451
enabling bandwidth shaping and scheduling 2-573
enabling bandwidth sharing and scheduling 2-575
limiting the maximum output on a port 2-571
mapping a port to a queue-set 2-283
mapping CoS values to a queue and threshold 2-237
mapping DSCP values to a queue and threshold 2-239
setting maximum and reserved memory allocations 2-221
setting WTD thresholds 2-221
enabling 2-207
ingress queues
allocating buffers 2-227
assigning SRR scheduling weights 2-225
defining the CoS input queue threshold map 2-229
defining the DSCP input queue threshold map 2-231
displaying buffer allocations 2-444
displaying CoS input queue threshold map 2-448
displaying DSCP input queue threshold map 2-448
displaying queueing strategy 2-444
displaying settings for 2-442
enabling the priority queue 2-233
mapping CoS values to a queue and threshold 2-229
mapping DSCP values to a queue and threshold 2-231
setting WTD thresholds 2-235
maps
defining 2-215, 2-229, 2-231, 2-237, 2-239
displaying 2-448
policy maps
applying an aggregate policer 2-266
applying to an interface 2-300, 2-305
creating 2-268
defining policers 2-209, 2-264
displaying policers 2-441
displaying policy maps 2-468
hierarchical 2-269
policed-DSCP map 2-215
setting DSCP or IP precedence values 2-303
traffic classifications 2-41
trust states 2-630
port trust states 2-241
queues, enabling the expedite 2-276
statistics
in-profile and out-of-profile packets 2-444
packets enqueued or dropped 2-444
sent and received CoS values 2-444
sent and received DSCP values 2-444
trusted boundary for IP phones 2-241
VLAN-based 2-243
quality of service
querytime, MVR 2-249
queue-set command 2-283
R
rapid per-VLAN spanning-tree plus
rapid PVST+
rcommand command 2-284
re-authenticating IEEE 802.1x-enabled ports 2-97
re-authentication
periodic 2-99
time between attempts 2-100
receiver ports, MVR 2-252
receiving flow-control packets 2-109
recovery mechanism
causes 2-106
timer interval 2-107
redundancy for cluster switches 2-70
reload command 2-286
remote command 2-288
remote-span command 2-289
Remote Switched Port Analyzer
rename (boot loader) command A-18
renew ip dhcp snooping database command 2-291
requirements
cluster xviii
device manager xviii
Network Assistant xviii
reset (boot loader) command A-19
reset command 2-652
resource templates, displaying 2-476
rmdir (boot loader) command A-20
rmon collection stats command 2-293
root guard, for spanning tree 2-534
routed ports
IP addresses on 2-122
number supported 2-122
RSPAN
configuring 2-244
displaying 2-454
filter RSPAN traffic 2-244
remote-span command 2-289
sessions
add interfaces to 2-244
displaying 2-454
start new 2-244
S
SDM mismatch mode 2-295, 2-489
sdm prefer command 2-294
SDM templates
allowed resources 2-295
and stacking 2-295
displaying 2-476
dual IPv4 and IPv6 2-294
secure ports, limitations 2-604
sending flow-control packets 2-109
service password-recovery command 2-298
service-policy command 2-300
session command 2-302
set (boot loader) command A-21
set command 2-303
setup command 2-305
setup express command 2-308
show access-lists command 2-310
show archive status command 2-313
show arp access-list command 2-315
show auto qos command 2-316
show boot command 2-320
show cable-diagnostics tdr command 2-322
show changes command 2-652
show class-map command 2-325
show cluster candidates command 2-328
show cluster command 2-326
show cluster members command 2-330
show controllers cpu-interface command 2-332
show controllers ethernet-controller command 2-334
show controllers power inline command 2-342
show controllers tcam command 2-345
show controller utilization command 2-347
show current command 2-652
show dot1q-tunnel command 2-349
show dot1x command 2-351
show dtp 2-354
show env command 2-356
show errdisable detect command 2-359
show errdisable flap-values command 2-361
show errdisable recovery command 2-363
show etherchannel command 2-365
show flowcontrol command 2-368
show idprom command 2-370
show interfaces command 2-372
show interfaces counters command 2-381
show inventory command 2-384
show ip arp inspection command 2-385
show ipc command 2-409
show ip dhcp snooping binding command 2-390
show ip dhcp snooping command 2-389
show ip dhcp snooping database command 2-393
show ip igmp profile command 2-395
show ip igmp snooping command 2-396
show ip igmp snooping groups command 2-401
show ip igmp snooping mrouter command 2-403
show ip igmp snooping querier detail command 2-399
show ip source binding command 2-405
show ip verify source command 2-407
show l2protocol-tunnel command 2-413
show lacp command 2-416
show mac access-group command 2-420
show mac address-table address command 2-424
show mac address-table aging time command 2-426
show mac address-table command 2-422
show mac address-table count command 2-428
show mac address-table dynamic command 2-430
show mac address-table interface command 2-432
show mac address-table notification command 2-434
show mac address-table static command 2-436
show mac address-table vlan command 2-438
show mls qos aggregate-policer command 2-441
show mls qos command 2-440
show mls qos input-queue command 2-442
show mls qos interface command 2-444
show mls qos maps command 2-448
show mls qos queue-set command 2-451
show mls qos vlan command 2-453
show monitor command 2-454
show mvr command 2-457
show mvr interface command 2-459
show mvr members command 2-461
show pagp command 2-463
show parser macro command 2-465
show platform acl command C-2
show platform backup interface command C-3
show platform configuration command C-4
show platform etherchannel command C-5
show platform forward command C-6
show platform frontend-controller command C-8
show platform igmp snooping command C-9
show platform ipc trace command C-16
show platform ip multicast command C-11
show platform ip unicast command C-12
show platform ipv6 unicast command C-17
show platform layer4op command C-19
show platform mac-address-table command C-20
show platform messaging command C-21
show platform monitor command C-22
show platform mvr table command C-23
show platform pm command C-24
show platform port-asic command C-25
show platform port-security command C-30
show platform qos command C-31
show platform resource-manager command C-32
show platform snmp counters command C-34
show platform spanning-tree command C-35
show platform stack-manager command C-37
show platform stp-instance command C-36
show platform tb command C-39
show platform tcam command C-41
show platform vlan command C-44
show policy-map command 2-468
show port security command 2-470
show power inline command 2-473
show proposed command 2-652
show sdm prefer command 2-476
show setup express command 2-479
show spanning-tree command 2-480
show storm-control command 2-486
show switch command 2-488
show system mtu command 2-491
show trust command 2-630
show udld command 2-492
show version command 2-495
show vlan access-map command 2-502
show vlan command 2-497
show vlan command, fields 2-499
show vlan filter command 2-503
show vmps command 2-504
show vtp command 2-507
shutdown command 2-511
shutdown threshold, Layer 2 protocol tunneling 2-170
shutdown vlan command 2-512
Smartports macros
SNMP host, specifying 2-517
SNMP informs, enabling the sending of 2-513
snmp-server enable traps command 2-513
snmp-server host command 2-517
snmp trap mac-notification command 2-521
SNMP traps
enabling MAC address notification trap 2-521
enabling the MAC address notification feature 2-186
enabling the sending of 2-513
SoftPhone
software images
copying 2-7
deleting 2-75
downloading 2-10
uploading 2-17
software version, displaying 2-495
source ports, MVR 2-252
SPAN
configuring 2-244
debug messages, display B-22
displaying 2-454
filter SPAN traffic 2-244
sessions
add interfaces to 2-244
displaying 2-454
start new 2-244
spanning 2-563
spanning-tree backbonefast command 2-523
spanning-tree bpdufilter command 2-524
spanning-tree bpduguard command 2-526
spanning-tree cost command 2-528
spanning-tree etherchannel command 2-530
spanning-tree extend system-id command 2-532
spanning-tree guard command 2-534
spanning-tree link-type command 2-536
spanning-tree loopguard default command 2-538
spanning-tree mode command 2-540
spanning-tree mst configuration command 2-542
spanning-tree mst cost command 2-544
spanning-tree mst forward-time command 2-546
spanning-tree mst hello-time command 2-547
spanning-tree mst max-age command 2-548
spanning-tree mst max-hops command 2-549
spanning-tree mst port-priority command 2-551
spanning-tree mst pre-standard command 2-553
spanning-tree mst priority command 2-554
spanning-tree mst root command 2-555
spanning-tree portfast (global configuration) command 2-559
spanning-tree portfast (interface configuration) command 2-561
spanning-tree port-priority command 2-557
Spanning Tree Protocol
spanning-tree transmit hold-count command 2-563
spanning-tree uplinkfast command 2-564
spanning-tree vlan command 2-566
speed command 2-569
srr-queue bandwidth limit command 2-571
srr-queue bandwidth shape command 2-573
srr-queue bandwidth share command 2-575
SSH, configuring version 2-166
stack-mac persistent timer command 2-577
stack member
access 2-302
priority value 2-582
provisioning 2-583
reloading 2-286
stacks, switch
MAC address 2-577
provisioning a new member 2-583
reloading 2-286
stack member access 2-302
stack member number 2-488, 2-585
stack member priority value 2-488, 2-582
static-access ports, configuring 2-589
statistics, Ethernet group 2-293
sticky learning, enabling 2-602
storm-control command 2-579
STP
BackboneFast 2-523
counters, clearing 2-56
debug messages, display
BackboneFast events B-78
MSTP B-81
optimized BPDUs handling B-80
spanning-tree activity B-76
switch shim B-83
transmitted and received BPDUs B-79
UplinkFast B-85
detection of indirect link failures 2-523
enabling protocol tunneling for 2-170
EtherChannel misconfiguration 2-530
extended system ID 2-532
STP (continued)
path cost 2-528
protocol modes 2-540
root port
accelerating choice of new 2-564
loop guard 2-534
preventing from becoming designated 2-534
restricting which can be root 2-534
root guard 2-534
UplinkFast 2-564
root switch
affects of extended system ID 2-532, 2-567
hello-time 2-566
interval between BDPU messages 2-566
interval between hello BPDU messages 2-566
max-age 2-566
port priority for selection of 2-557
primary or secondary 2-566
switch priority 2-566
state changes
blocking to forwarding state 2-561
enabling BPDU filtering 2-524, 2-559
enabling BPDU guard 2-526, 2-559
enabling Port Fast 2-559, 2-561
enabling timer to recover from error state 2-106
forward-delay time 2-566
length of listening and learning states 2-566
shutting down Port Fast-enabled ports 2-559
state information display 2-480
SVIs, creating 2-116
Switched Port Analyzer
switching characteristics
modifying 2-587
returning to interfaces 2-587
switchport access command 2-589
switchport backup interface command 2-591
switchport block command 2-593
switchport command 2-587
switchport host command 2-594
switchport mode command 2-595
switchport mode private-vlan command 2-598
switchport nonegotiate command 2-600
switchport port-security aging command 2-607
switchport port-security command 2-602
switchport priority extend command 2-609
switchport private-vlan command 2-611
switchport protected command 2-613
switchports, displaying 2-372
switchport trunk command 2-615
switchport voice vlan command 2-618
switch priority command 2-582
switch provision command 2-583
switch renumber command 2-585
system env temperature threshold yellow command 2-620
system message logging 2-178
system message logging, save message to flash 2-179
system mtu command 2-622
system resource templates 2-294
T
tar files, creating, listing, and extracting 2-14
TDR, running 2-624
Telnet, using to communicate to cluster switches 2-284
temperature information, displaying 2-356
templates, system resources 2-294
test cable-diagnostics tdr command 2-624
traceroute mac command 2-625
traceroute mac ip command 2-628
trunking, VLAN mode 2-595
trunk mode 2-595
trunk ports 2-595
trunks, to non-DTP device 2-596
trusted boundary for QoS 2-241
trusted port states for QoS 2-241
tunnel ports, Layer 2 protocol, displaying 2-413
type (boot loader) command A-24
U
UDLD
debug messages, display B-94
enable globally 2-632
enable per interface 2-634
error recovery timer 2-106
message timer 2-632
reset a shutdown interface 2-636
status 2-492
udld command 2-632
udld port command 2-634
udld reset command 2-636
unicast storm control 2-579
UniDirectional Link Detection
unknown multicast traffic, preventing 2-593
unknown unicast traffic, preventing 2-593
unset (boot loader) command A-25
upgrading
monitoring status of 2-313
upgrading information
UplinkFast, for STP 2-564
V
version (boot loader) command A-27
version mismatch mode 2-489
vlan (global configuration) command 2-637
vlan (VLAN configuration) command 2-643
vlan access-map command 2-649
VLAN access map configuration mode 2-649
VLAN access maps
actions 2-5
displaying 2-502
VLAN-based QoS 2-243
VLAN configuration
VLAN configuration mode
commands
VLAN 2-643
VTP 2-666
description 1-5
entering 2-651
summary 1-3
vlan database command 2-651
vlan dot1q tag native command 2-654
vlan filter command 2-655
VLAN filters, displaying 2-503
VLAN maps
applying 2-655
creating 2-649
defining 2-201
displaying 2-502
VLAN Query Protocol
VLANs
adding 2-637
debug messages, display
ISL B-90
VLAN IOS file system error tests B-88
VLAN manager activity B-86
VTP B-92
displaying configurations 2-497
extended-range 2-637
MAC addresses
displaying 2-438
number of 2-428
private 2-598
configuring 2-278
displaying 2-497
restarting 2-512
saving the configuration 2-637
shutting down 2-512
SNMP traps for VTP 2-515, 2-518
suspending 2-512
variables 2-643
VLAN Trunking Protocol
VM mode 2-489
VMPS
configuring servers 2-660
displaying 2-504
error recovery timer 2-107
reconfirming dynamic VLAN assignments 2-657
vmps reconfirm (global configuration) command 2-658
vmps reconfirm (privileged EXEC) command 2-657
vmps retry command 2-659
vmps server command 2-660
voice VLAN
configuring 2-618
setting port priority 2-609
VQP
and dynamic-access ports 2-590
clearing client statistics 2-58
displaying information 2-504
per-server retry count 2-659
reconfirmation interval 2-658
reconfirming dynamic VLAN assignments 2-657
VTP
changing characteristics 2-662
clearing pruning counters 2-59
configuring
file name 2-662
counters display fields 2-508
displaying information 2-507
enabling
tunneling for 2-170
saving the configuration 2-637, 2-647
statistics 2-507
status 2-507
status display fields 2-509
vtp (global configuration) command 2-662
vtp (VLAN configuration) command 2-666
X