Step 1
|
enable
|
Enables privileged EXEC mode.
|
Step 2
|
configure terminal
Device# configure terminal
|
Enters global configuration mode.
|
Step 3
|
router bgp
as-number
Device(config)# router bgp 10
|
Enters router configuration mode, and creates a BGP routing process.
|
Step 4
|
no synchronization
Device(config-router)# no synchronization
|
Configures BGP to send advertisements without waiting to synchronize with the IGP.
|
Step 5
|
neighbor
ip-address
remote-as
as-number
Device(config-router)# neighbor 10.0.0.1 remote-as 10
|
Establishes peering with the specified neighbor or peer group.
|
Step 6
|
neighbor
ip-address
update-source loopback
interface-number
Device(config-router)# neighbor 10.0.0.1 update-source loopback 0
|
Configures BGP to use any operational interface for TCP connections.
|
Step 7
|
address-family vpnv4
Device(config-router)# address-family vpnv4
|
Enters address family configuration mode for configuring routing sessions that use standard IPv4 address prefixes, such as
BGP, RIP, and static routing sessions.
|
Step 8
|
neighbor
ip-address
activate
Device(config-router-af)# neighbor 10.0.0.1 activate
|
Establishes peering with the specified neighbor or peer group.
|
Step 9
|
neighbor
ip-address
send-community extended
Device(config-router-af)# neighbor 10.0.0.1 send-community extended
|
Configures the local device to send extended community attribute information to the specified neighbor.
|
Step 10
|
exit-address-family
Device(config-router-af)# exit-address-family
|
Exits address family configuration mode and enters router configuration mode.
|
Step 11
|
address-family ipv4 vrf
vrf-name
Device(config-router)# address-family ipv4 vrf RED
|
Configures an IPv4 address family for the EIGRP VRF and enters address family configuration mode.
|
Step 12
|
redistribute eigrp
as-number [metric
metric-value] [route-map
map-name]
Device(config-router-af)# redistribute eigrp 101
|
Redistributes the EIGRP VRF into BGP.
|
Step 13
|
no synchronization
Device(config-router-af)# no synchronization
|
Configures BGP to send advertisements without waiting to synchronize with the IGP.
|
Step 14
|
exit-address-family
Device(config-router-af)# exit-address-family
|
Exits address family configuration mode and enters router configuration mode.
|
Step 15
|
end
Device(config-router)# end
|
Exits router configuration mode and enters privileged EXEC mode.
|