Important Notes
Unsupported Features: Cisco Catalyst 9600 Series Supervisor 2 Module
-
BGP EVPN VXLAN
-
Layer 2 Broadcast, Unknown Unicast, and Multicast (BUM) Traffic Forwarding using Ingress Replication
-
BUM Traffic Rate Limiting
-
Dynamic ARP inspection (DAI) and DHCP Rogue Server Protection
-
EVPN VXLAN Centralized Default Gateway
-
VXLAN-Aware Flexible Netflow
-
MPLS Layer 3 VPN Border Leaf Handoff
-
MPLS Layer 3 VPN Border Spine Handoff
-
VPLS over MPLS Border Leaf Handoff
-
VPLS over MPLS Border Spine Handoff
-
Interworking of Layer 3 TRM with MVPN Networks for IPv4 Traffic
-
Private VLANs (PVLANs)
-
BGP EVPN VXLAN with IPv6 in the Underlay (VXLANv6)
-
EVPN Microsegmentation
-
VRF aware NAT64 EVPN Fabric
-
EVPN L2TRM
-
Multihoming Single Active
-
-
Cisco TrustSec
-
Cisco TrustSec Manual Configuration
-
Cisco TrustSec Security Association Protocol (SAP)
-
Cisco TrustSec Metadata Header Encapsulation
-
Cisco TrustSec SGT Caching
-
Cisco TrustSec SGT Inline Tagging
-
-
High Availability
-
Quad-Supervisor with Route Processor Redundancy
-
Secure StackWise Virtual
-
-
Interface and Hardware
-
Link Debounce Timer
-
EnergyWise
-
-
IP Addressing Services
-
Next Hop Resolution Protocol (NHRP)
-
Network Address Translation (NAT)
-
Gateway Load Balancing Protocol (GLBP)
-
Web Cache Communication Protocol (WCCP)
-
Switchport Block Unknown Unicast and Switchport Block Unknown Multicast
-
Message Session Relay Protocol (MSRP)
-
TCP MSS Adjustment
-
GRE IPv6 Tunnels
-
IP Fast Reroute (IP FRR)
-
-
IP Multicast Routing
-
Multicast Routing over GRE Tunnel
-
Multicast VLAN Registration (MVR) for IGMP Snooping
-
IPv6 Multicast over Point-to-Point GRE
-
IGMP Proxy
-
Bidirectional PIM
-
Multicast VPN
-
MVPNv6
-
mVPN Extranet Support
-
MLDP-Based VPN
-
PIM Snooping
-
PIM Dense Mode
-
-
IP Routing
-
OSPFv2 Loop-Free Alternate IP Fast Reroute
-
EIGRP Loop-Free Alternate IP Fast Reroute
-
Policy-Based Routing (PBR) for IPv6
-
VRF-Aware PBR
-
PBR for Object-Group Access Control List (OGACL) Based Matching
-
Multipoint GRE
-
Web Cache Communication Protocol (WCCP)
-
Unicast and Multicast over Point-to-Multipoint GRE
-
-
Layer 2
-
Multi-VLAN Registration Protocol (MVRP)
-
Loop Detection Guard
-
-
Multiprotocol Label Switching
-
LAN MACsec over Multiprotocol Label Switching (MPLS)
-
BGP Multipath Load Sharing for Both eBGP and iBGP in an MPLS VPN
-
MPLS over GRE
-
MPLS Layer 2 VPN over GRE
-
MPLS Layer 3 VPN over GRE
-
Virtual Private LAN Service (VPLS)
-
VPLS Autodiscovery, BGP-based
-
VPLS Layer 2 Snooping: Internet Group Management Protocol or Multicast Listener Discovery
-
Hierarchical VPLS with MPLS Access
-
VPLS Routed Pseudowire IRB(v4) Unicast
-
MPLS VPN Inter-AS Options (options B and AB)
-
MPLS VPN Inter-AS IPv4 BGP Label Distribution
-
Seamless Multiprotocol Label Switching
-
-
Network Management
-
ERSPAN
-
Flow-Based Switch Port Analyser
-
FRSPAN
-
Egress Netflow
-
IP Aware MPLS Netflow
-
NetFlow Version 5
-
-
Quality of Service
-
QoS Ingress Shaping
-
VPLS QoS
-
Microflow Policers
-
Per VLAN Policy and Per Port Policer
-
Mixed COS/DSCP Threshold in a QoS LAN-queueing Policy
-
Easy QoS: match-all Attributes
-
Classify: Packet Length
-
Class-Based Shaping for DSCP/Prec/COS/MPLS Labels
-
CoPP Microflow Policing
-
Egress Policing
-
Egress Microflow Destination-Only Policing
-
Ethertype Classification
-
Packet Classification Based on Layer3 Packet-Length
-
PACLs
-
Per IP Session QoS
-
Per Queue Policer
-
QoS Data Export
-
QoS L2 Missed Packets Policing
-
-
Security
-
Lawful Intercept
-
MACsec:
-
MACsec EAP-TLS
-
Switch-to-host MACsec
-
Certificate-based MACsec
-
Cisco TrustSec SAP MACsec
-
-
MAC ACLs
-
Port ACLs
-
VLAN ACLs
-
IP Source Guard
-
IPv6 Source Guard
-
Web-based Authentication
-
Port Security
-
Weighted Random Early Detection mechanism (WRED) Based on DSCP, PREC, or COS
-
IEEE 802.1x Port-Based Authentication
-
Dynamic ARP Inspection
-
Dynamic ARP Inspection Snooping
-
-
System Management
-
Unicast MAC Address Filtering
-
-
VLAN
-
Wired Dynamic PVLAN
-
Private VLANs
-
Complete List of Supported Features
For the complete list of features supported on a platform, see the Cisco Feature Navigator.
Default Behaviour
Beginning from Cisco IOS XE Gibraltar 16.12.5 and later, do not fragment bit (DF bit) in the IP packet is always set to 0 for all outgoing RADIUS packets (packets that originate from the device towards the RADIUS server).