The following example shows how to display interface statistics information:
Device> enable
Device# configure terminal
Device(config)# show statistics interface ethernet 1/1
Port number : e1/1
last 5 minutes input rate 6198600 bits/sec, 12106 packets/sec
last 5 minutes output rate 28256 bits/sec, 55 packets/sec
64 byte packets:4267810
65-127 byte packets:0
128-255 byte packets:0
256-511 byte packets:0
512-1023 byte packets:0
1024-1518 byte packets:0
4267707 packets input, 273132992 bytes , 1 discarded packets
4267707 unicasts, 0 multicasts, 0 broadcasts
1 input errors, 0 FCS error, 0 symbol error, 0 false carrier
1 runts, 0 giants
23763 packets output, 1520832 bytes, 0 discarded packets
0 unicasts, 23763 multicasts, 0 broadcasts
0 output errors, 0 deferred, 0 collisions
0 late collisions
Total entries: 1.
The following example shows how to display interface statistic information:
Device> enable
Device# configure terminal
Device(config)# show interface ethernet 1/1
Fast Ethernet e1/1 current state: enabled, port link is up
Time duration of linkup is 31 second
Hardware address is 00:0a:5a:00:04:1e
SetSpeed is auto, ActualSpeed is 100M, Duplex mode is full
Current port type: 100BASE-T
Priority is 0
Flow control is disabled
Broadcast storm control target rate is 50000pps
PVID is 1
Port mode: hybrid
Untagged VLAN ID : 1
Input : 5361414 packets, 343130240 bytes
0 broadcasts, 0 multicasts, 5361414 unicasts
Output : 23763 packets, 1520832 bytes
0 broadcasts, 23763 multicasts, 0 unicasts.