Overview of Information Management
The ONT Information Management feature displays information about ONT, such as ONT description, ONT version, ONT statistics, ONT port number, and ONT MAC address table.
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The ONT Information Management feature displays information about ONT, such as ONT description, ONT version, ONT statistics, ONT port number, and ONT MAC address table.
Use the following commands to monitor ONT information management.
Command |
Purpose |
---|---|
show ont description {ont_id_list | interface gpon interface_list} |
Displays ONT description. |
show ont version interface gpon{interface_list | all} |
Displays ONT version. |
show ont statistics ont_id {port port_id | gem{ broadcast | multicast | unicast gem_index} | traffic } |
Displays statistical information about ONT. |
show ont port-status ont_id { port port_id| catv-portcatv-port-id| pots-port pots-port-number} |
Displays status information of the ONT port. |
show ont mac-address-table {mac_address | ont_id | interface gpon {interface_num | all} } |
Displays information about ONT MAC address table. |
The following example shows how to view ONT description:
Device> enable
Device# configure terminal
Device(config)# show ont description 0/1/1
ONT SN Description
0/1/1 GPON-20170803 test1
Total entries: 1.
Device(config)# show ont description interface gpon 0/1
ONT SN Description
0/1/1 GPON-20170803 test1
0/1/2 GPON-16403656 test2
0/1/3 GPON-20171122 test3
Total entries: 3.
The following example shows how to view ONT version:
Device(config)# show ont version interface gpon all
ONT SN Software-version Firmware-version
0/1/1 GPON-20170803 C01R544V00B06/C01R544V00B07 S40-400
0/1/2 GPON-16403656 V1.00/V1.00 G72210001
0/1/3 GPON-20171122 C18R541V00B04/C18R541V00B01 V1.0
Total entries: 3.
The following example shows how to view ONT statistics.
Device(config)# show ont statistics 0/6/1 traffic
Discarded frames :0
Upstream frames :0
Upstream bytes :4043664
Downstream frames :0
Downstream bytes :0
Up traffic (kbps) :37
Down traffic (kbps) :0
The following example shows how to monitor information management:
Device> enable
Device# configure terminal
Device(config)# show ont description 0/1/1
ONT SN Description
0/1/1 GPON-20170803 test1
Total entries: 1.
Device(config)# show ont description interface gpon 0/1
ONT SN Description
0/1/1 GPON-20170803 test1
0/1/2 GPON-16403656 test2
0/1/3 GPON-20171122 test3
Total entries: 3.
Device(config)# show ont version interface gpon all
ONT SN Software-version Firmware-version
0/1/1 GPON-20170803 C01R544V00B06/C01R544V00B07 S40-400
0/1/2 GPON-16403656 V1.00/V1.00 G72210001
0/1/3 GPON-20171122 C18R541V00B04/C18R541V00B01 V1.0
Total entries: 3.
Device(config)# show ont statistics 0/6/1 traffic
Discarded frames :0
Upstream frames :0
Upstream bytes :4043664
Downstream frames :0
Downstream bytes :0
Up traffic (kbps) :37
Down traffic (kbps) :0
Device(config)# show ont mac-address-table 0/1/1
MAC-Address VID ONT-ID SN ID/GEM
00:00:00:00:00:11 2 0/1/1 GPON-173a00f1 1/256
00:0a:5a:46:b3:66 2 0/1/1 GPON-173a00f1 1/256
Total entries: 2.
The following example shows how to view an ONT MAC address table:
Device(config)# show ont mac-address-table 0/1/1
MAC-Address VID ONT-ID SN ID/GEM
00:00:00:00:00:11 2 0/1/1 GPON-173a00f1 1/256
00:0a:5a:46:b3:66 2 0/1/1 GPON-173a00f1 1/256
Total entries: 2.