- Index
- Preface
- Using the Command Line Interface
- Cisco IE 3000 Switch Cisco IOS Commands - aaa accounting through renew ip dhcp
- Cisco IE 3000 Switch Cisco IOS Commands - rmon collection through show vtp
- Cisco IE 3000 Switch Cisco IOS Commands - shutdown through vtp
- Cisco IE 3000 Switch Bootloader Commands
- Cisco IE 3000 Switch Debug Commands
- Cisco IE 3000 Switch Show Platform Commands
- show platform acl
- show platform backup interface
- show platform etherchannel
- show platform forward
- show platform ip igmp snooping
- show platform layer4op
- show platform mac-address-table
- show platform messaging
- show platform monitor
- show platform mvr table
- show platform pm
- show platform port-asic
- show platform port-security
- show platform qos
- show platform resource-manager
- show platform snmp counters
- show platform spanning-tree
- show platform stp-instance
- show platform tcam
- show platform vlan
IE 3000 Switch Show Platform Commands
This appendix describes the show platform privileged EXEC commands that have been created or changed for use with the IE 3000 switch. These commands display information helpful in diagnosing and resolving internetworking problems and should be used only under the guidance of Cisco technical support staff.
show platform acl
Use the show platform acl privileged EXEC command to display platform-dependent access control list (ACL) manager information.
show platform acl {interface interface-id | label label-number [detail] | statistics asic-number | usage asic-number [summary] | vlan vlan-id} [ | {begin | exclude | include} expression]
Syntax Description
Command Modes
Privileged EXEC
Command History
|
|
---|---|
12.2(44)EX |
This command was introduced. |
Usage Guidelines
You should use this command only when you are working directly with a technical support representative while troubleshooting a problem. Do not use this command unless a technical support representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear.
show platform backup interface
Use the show platform backup interface privileged EXEC command to display platform-dependent backup information used in a Flex Links configuration.
show platform backup interface [interface-id | dummyQ] [ | {begin | exclude | include} expression]
Syntax Description
Command Modes
Privileged EXEC
Command History
|
|
---|---|
12.2(44)EX |
This command was introduced. |
Usage Guidelines
You should use this command only when you are working directly with a technical support representative while troubleshooting a problem. Do not use this command unless a technical support representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear.
show platform etherchannel
Use the show platform etherchannel privileged EXEC command to display platform-dependent EtherChannel information.
show platform etherchannel {flags | time-stamps} [ | {begin | exclude | include} expression]
Syntax Description
Command Modes
Privileged EXEC
Command History
|
|
---|---|
12.2(44)EX |
This command was introduced. |
Usage Guidelines
You should use this command only when you are working directly with a technical support representative while troubleshooting a problem. Do not use this command unless a technical support representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear.
show platform forward
Use the show platform forward privileged EXEC command for an interface to specify how the hardware would forward a frame that matches the specified parameters.
show platform forward interface-id [vlan vlan-id] src-mac dst-mac [l3protocol-id] [sap | snap] [cos cos] [ip src-ip dst-ip [frag field] [dscp dscp] {l4protocol-id | icmp icmp-type icmp-code | igmp igmp-version igmp-type | sctp src-port dst-port | tcp src-port dst-port flags | udp src-port dst-port]} [ | {begin | exclude | include} expression]
Syntax Description
Command Modes
Privileged EXEC
Command History
|
|
---|---|
12.2(44)EX |
This command was introduced. |
Usage Guidelines
You should use this command only when you are working directly with a technical support representative while troubleshooting a problem. Do not use this command unless a technical support representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear.
Examples
For examples of the show platform forward command output displays and what they mean, see the "Troubleshooting" chapter of the software configuration guide for this release.
show platform ip igmp snooping
Use the show platform ip igmp snooping privileged EXEC command to display platform-dependent Internet Group Management Protocol (IGMP) snooping information.
show platform ip igmp snooping {all | control [di] | counters | flood [vlan vlan-id] | group ip-address | hardware | retry [count | local [count] | remote [count]]} [ | {begin | exclude | include} expression]
Syntax Description
Command Modes
Privileged EXEC
Command History
|
|
---|---|
12.2(44)EX |
This command was introduced. |
Usage Guidelines
You should use this command only when you are working directly with a technical support representative while troubleshooting a problem. Do not use this command unless a technical support representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear.
show platform layer4op
Use the show platform layer4op privileged EXEC command to display platform-dependent Layer 4 operator information.
show platform layer4op {acl | pacl [port-asic] | qos [port-asic]} {and-or | map | or-and | vcu} [ | {begin | exclude | include} expression]
Syntax Description
Command Modes
Privileged EXEC
Command History
|
|
---|---|
12.2(44)EX |
This command was introduced. |
Usage Guidelines
You should use this command only when you are working directly with a technical support representative while troubleshooting a problem. Do not use this command unless a technical support representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear.
show platform mac-address-table
Use the show platform mac-address-table privileged EXEC command to display platform-dependent MAC address table information.
show platform mac-address-table [aging-array | hash-table | mac-address mac-address] [vlan vlan-id]] [ | {begin | exclude | include} expression]
Syntax Description
Command Modes
Privileged EXEC
Command History
|
|
---|---|
12.2(44)EX |
This command was introduced. |
Usage Guidelines
You should use this command only when you are working directly with a technical support representative while troubleshooting a problem. Do not use this command unless a technical support representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear.
show platform messaging
Use the show platform messaging privileged EXEC command to display platform-dependent application and performance message information.
show platform messaging {application [incoming | outgoing | summary] | hiperf [class-number]} [ | {begin | exclude | include} expression]
Syntax Description
Command Modes
Privileged EXEC
Command History
|
|
---|---|
12.2(44)EX |
This command was introduced. |
Usage Guidelines
You should use this command only when you are working directly with a technical support representative while troubleshooting a problem. Do not use this command unless a technical support representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear.
show platform monitor
Use the show platform monitor privileged EXEC command to display platform-dependent Switched Port Analyzer (SPAN) information.
show platform monitor [session session-number] [ | {begin | exclude | include} expression]
Syntax Description
Command Modes
Privileged EXEC
Command History
|
|
---|---|
12.2(44)EX |
This command was introduced. |
Usage Guidelines
You should use this command only when you are working directly with a technical support representative while troubleshooting a problem. Do not use this command unless a technical support representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear.
show platform mvr table
Use the show platform mvr table privileged EXEC command to display the platform-dependent Multicast VLAN Registration (MVR) multi-expansion descriptor (MED) group mapping table.
show platform mvr table [ | {begin | exclude | include} expression]
Syntax Description
Command Modes
Privileged EXEC
Command History
|
|
---|---|
12.2(44)EX |
This command was introduced. |
Usage Guidelines
You should use this command only when you are working directly with a technical support representative while troubleshooting a problem. Do not use this command unless a technical support representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear.
show platform pm
Use the show platform pm privileged EXEC command to display platform-dependent port-manager information.
show platform pm {counters | group-masks | idbs {active-idbs | deleted-idbs} | if-numbers | link-status | platform-block | port-info interface-id | vlan {info | line-state}
[ | {begin | exclude | include} expression]
Syntax Description
Note Though visible in the command-line help strings, the stack-view keyword is not supported.
Command Modes
Privileged EXEC
Command History
|
|
---|---|
12.2(44)EX |
This command was introduced. |
Usage Guidelines
You should use this command only when you are working directly with your technical support representative while troubleshooting a problem. Do not use this command unless your technical support representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear.
show platform port-asic
Use the show platform port-asic privileged EXEC command to display platform-dependent port ASIC register information.
show platform port-asic {cpu-queue-map-table [asic number | port number [asic number]] |
dest-map index number |
etherchannel-info [asic number | port number [asic number]] |
exception [asic number | port number [asic number]] |
global-status [asic number | port number [asic number]] |
learning [asic number | port number [asic number]] |
mac-info [asic number | port number [asic number]] |
mvid [asic number] |
packet-info-ram [asic number | index number [asic number]] |
port-info [asic number | port number [asic number]] |
prog-parser [asic number | port number [asic number]] |
receive {buffer-queue | port-fifo | supervisor-sram} [asic number | port number [asic number]] |
span [vlan-id [asic number] | [asic number]
stats {drop | enqueue | miscellaneous | supervisor} [asic number | port number [asic number]] |
transmit {port-fifo | queue | supervisor-sram} [asic number | port number [asic number]]
vct [asic number | port number [asic number]]
version}
[ | {begin | exclude | include} expression]
Syntax Description
Note Though visible in the command-line help strings, the stack {control | dest-map | learning | messages | mvid | prog-parser | span | stats [asic number | port number [asic number]} keywords are not supported.
Command Modes
Privileged EXEC
Command History
|
|
---|---|
12.2(44)EX |
This command was introduced. |
Usage Guidelines
You should use this command only when you are working directly with your technical support representative while troubleshooting a problem. Do not use this command unless your technical support representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear.
show platform port-security
Use the show platform port-security privileged EXEC command to display platform-dependent port-security information.
show platform port-security [ | {begin | exclude | include} expression]
Syntax Description
Command Modes
Privileged EXEC
Command History
|
|
---|---|
12.2(44)EX |
This command was introduced. |
Usage Guidelines
You should use this command only when you are working directly with your technical support representative while troubleshooting a problem. Do not use this command unless your technical support representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear.
show platform qos
Use the show platform qos privileged EXEC command to display platform-dependent quality of service (QoS) information.
show platform qos {label asic number | policer {parameters asic number |
port alloc number asic number}} [ | {begin | exclude | include} expression]
Syntax Description
Command Modes
Privileged EXEC
Command History
|
|
---|---|
12.2(44)EX |
This command was introduced. |
Usage Guidelines
You should use this command only when you are working directly with your technical support representative while troubleshooting a problem. Do not use this command unless your technical support representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear.
show platform resource-manager
Use the show platform resource-manager privileged EXEC command to display platform-dependent resource-manager information.
show platform resource-manager {dm [index number] | erd [index number] |
mad [index number] | med [index number] | mod | msm {hash-table [vlan vlan-id] | mac-address mac-address [vlan vlan-id]} | sd [index number] |
vld [index number]} [ | {begin | exclude | include} expression]
Syntax Description
Command Modes
Privileged EXEC
Command History
|
|
---|---|
12.2(44)EX |
This command was introduced. |
Usage Guidelines
You should use this command only when you are working directly with your technical support representative while troubleshooting a problem. Do not use this command unless your technical support representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear.
show platform snmp counters
Use the show platform snmp counters privileged EXEC command to display platform-dependent Simple Network Management Protocol (SNMP) counter information.
show platform snmp counters [ | {begin | exclude | include} expression]
Syntax Description
Command Modes
Privileged EXEC
Command History
|
|
---|---|
12.2(44)EX |
This command was introduced. |
Usage Guidelines
You should use this command only when you are working directly with your technical support representative while troubleshooting a problem. Do not use this command unless your technical support representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear.
show platform spanning-tree
Use the show platform spanning-tree privileged EXEC command to display platform-dependent spanning-tree information.
show platform spanning-tree synchronization [detail | vlan vlan-id] [ | {begin | exclude | include} expression]
Syntax Description
Command Modes
Privileged EXEC
Command History
|
|
---|---|
12.2(44)EX |
This command was introduced. |
Usage Guidelines
You should use this command only when you are working directly with your technical support representative while troubleshooting a problem. Do not use this command unless your technical support representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear.
show platform stp-instance
Use the show platform stp-instance privileged EXEC command to display platform-dependent spanning-tree instance information.
show platform stp-instance vlan-id [ | {begin | exclude | include} expression]
Syntax Description
Command Modes
Privileged EXEC
Command History
|
|
---|---|
12.2(44)EX |
This command was introduced. |
Usage Guidelines
You should use this command only when you are working directly with your technical support representative while troubleshooting a problem. Do not use this command unless your technical support representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear.
show platform tcam
Use the show platform tcam privileged EXEC command to display platform-dependent ternary content addressable memory (TCAM) driver information.
show platform tcam {handle number | log-results | table {acl | all | local | mac-address | qos | station | vlan-list} | usage} [asic number [detail [invalid]] | [index number [detail [invalid]] | invalid | num number [detail [invalid]] | invalid] | [invalid] | [num number [detail [invalid]] | invalid]] [ | {begin | exclude | include} expression]
show platform tcam table acl [asic number [detail [invalid]] | [index number [detail [invalid]] | invalid | num number [detail [invalid]] | invalid] | [invalid] | [num number [detail [invalid]] | invalid]] [ | {begin | exclude | include} expression]
show platform tcam table all [asic number [detail [invalid]] | [index number [detail [invalid]] | invalid | num number [detail [invalid]] | invalid] | [invalid] | [num number [detail [invalid]] | invalid]] [ | {begin | exclude | include} expression]
show platform tcam table local [asic number [detail [invalid]] | [index number [detail [invalid]] | invalid | num number [detail [invalid]] | invalid] | [invalid] | [num number [detail [invalid]] | invalid]] [ | {begin | exclude | include} expression]
show platform tcam table mac-address [asic number [detail [invalid]] | [index number [detail [invalid]] | invalid | num number [detail [invalid]] | invalid] | [invalid] | [num number [detail [invalid]] | invalid]] [ | {begin | exclude | include} expression]
show platform tcam table qos [asic number [detail [invalid]] | [index number [detail [invalid]] | invalid | num number [detail [invalid]] | invalid] | [invalid] | [num number [detail [invalid]] | invalid]] [ | {begin | exclude | include} expression]
show platform tcam table station [asic number [detail [invalid]] | [index number [detail [invalid]] | invalid | num number [detail [invalid]] | invalid] | [invalid] | [num number [detail [invalid]] | invalid]] [ | {begin | exclude | include} expression]
show platform tcam table vlan-list [ [asic number [detail [invalid]] | [index number [detail [invalid]] | invalid | num number [detail [invalid]] | invalid] | [invalid] | [num number [detail [invalid]] | invalid]] [ | {begin | exclude | include} expression]
Syntax Description
Note Though visible in the command-line help strings, the ipv6, equal-cost-route, multicast-expansion, secondary, and usage keywords are not supported.
Command Modes
Privileged EXEC
Command History
|
|
---|---|
12.2(44)EX |
This command was introduced. |
Usage Guidelines
You should use this command only when you are working directly with your technical support representative while troubleshooting a problem. Do not use this command unless your technical support representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear.
show platform vlan
Use the show platform vlan privileged EXEC command to display platform-dependent VLAN information.
show platform vlan {misc | mvid | prune | refcount | rpc {receive | transmit}} [ | {begin | exclude | include} expression]
Syntax Description
Command Modes
Privileged EXEC
Command History
|
|
---|---|
12.2(44)EX |
This command was introduced. |
Usage Guidelines
You should use this command only when you are working directly with your technical support representative while troubleshooting a problem. Do not use this command unless your technical support representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear.