The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter contains the following sections:
To enable Bonjour globally on the switch, use the bonjour enable Global Configuration mode command.
To disable Bonjour, use the no form of this command.
bonjour enable
no bonjour enable
N/A
Bonjour is enabled by default.
Global Configuration mode
switchxxxxxx(config)# bonjour enableTo show Bonjour information, use the show bonjour Privileged EXEC Configuration mode command.
show bonjour
N/A
N/A
Privileged EXEC mode
The following example displays the Bonjour service information:
switchxxxxxx# show bonjour
Bonjour status: enabled
L2 interface status: Up
IP Address: 192.168.1.254
Service Admin Status Oper Status
-------- ------------ -----------
csco-sb enabled enabled
csco-api enabled enabled
https enabled enabled
http enabled enabled
ssh enabled disabled
telnet enabled disabled
Feedback