Index
A
aaa accounting dot1x command 2-1
aaa authentication dot1x command 2-3
AAA methods 2-3
access control entries
access control lists
access groups
IP 2-147
MAC, displaying 2-523
matching for QoS classification 2-283
access list, IPv6 2-216
access mode 2-682
access ports 2-682
ACLs
as match criteria for QoS classes 2-283
deny 2-88
displaying 2-398
for non-IP protocols 2-261
IP 2-147
on Layer 2 interfaces 2-147
permit 2-320
action command 2-5
address aliasing 2-303
aggregate policers
applying 2-332
creating 2-328
displaying 2-558
QoS 2-330
aggregate-port learner 2-309
alarm-contact command 2-7
alarm-contact status, displaying 2-431
allowed VLANs 2-698
archive download-sw command 2-9
archive tar command 2-12
archive upload-sw command 2-15
arp (boot loader) command A-2
arp access-list command 2-17
attaching policy maps to interfaces 2-381
authorization state of controlled port 2-103
autonegotiation of duplex mode 2-115
B
backup interfaces
configuring 2-675
displaying 2-453
bandwidth, configuring for QoS 2-19
bandwidth command 2-19
boot (boot loader) command A-3
boot config-file command 2-22
boot enable-break command 2-23
boot helper command 2-24
boot helper-config file command 2-25
booting
Cisco IOS image 2-28
displaying environment variables 2-403
interrupting 2-23
manually 2-26
boot loader
accessing A-1
booting
Cisco IOS image A-3
helper image 2-24
directories
creating A-18
displaying a list of A-8
removing A-22
displaying
available commands A-13
memory heap utilization A-14
version A-29
environment variables
described A-23
displaying settings A-23
location of A-24
setting A-23
unsetting A-27
files
copying A-6
deleting A-7
displaying a list of A-8
displaying the contents of A-5, A-19, A-26
renaming A-20
file system
formatting A-11
initializing flash A-10
running a consistency check A-12
prompt A-1
resetting the system A-21
boot manual command 2-26
boot private-config-file command 2-27
boot system command 2-28
BPDU filtering, for spanning tree 2-620, 2-658
BPDU guard, for spanning tree 2-622, 2-658
broadcast storm control 2-668
bundling characteristics, UNI 2-123
burst bytes, in QoS policers 2-324, 2-328
C
cat (boot loader) command A-5
CBWFQ, configuring 2-19
CDP, enabling protocol tunneling for 2-241
CFM 2-308
CFM as OAM protocol 2-308
channel-group command 2-29
channel-protocol command 2-33
child policy maps 2-383
class-based traffic shaping 2-396
class-based weighted fair queuing
class command 2-35
class-map command 2-37
class-map configuration mode 2-37
class maps
creating 2-37
defining the match criteria 2-284
displaying 2-407
matching in 2-37
class of service
clear ip arp inspection log command 2-39
clear ip arp inspection statistics command 2-40
clear ipc command 2-43
clear ipv6 dhcp conflict command 2-44
clear l2protocol-tunnel counters command 2-45
clear lacp command 2-46
clear logging onboard command 2-47
clear mac address-table command 2-48, 2-49
clear policer cpu uni-eni counters command 2-51
clear port-security command 2-52
clear spanning-tree counters command 2-55
clear spanning-tree detected-protocols command 2-56
clear vmps statistics command 2-58
command modes defined 1-1
committed information rate in QoS policers 2-323, 2-328
configuration files
password recovery disable considerations A-1
specifying the name 2-22, 2-27
configuring multiple interfaces 2-143
conform-action command 2-59
control-plane policer 2-51
control-plane policer information, displaying 2-559
control-plane security 2-334
control plane statistics, clearing 2-51
copy (boot loader) command A-6
copy logging onboard module command 2-61
CoS
as match criteria for QoS groups 2-284
for QoS classification 2-385
setting value in policy maps 2-385
CoS value, assigning to Layer 2 protocol packets 2-244
CPU ASIC statistics, displaying 2-408
CPU protection policers, displaying C-26
cpu traffic qos cos command 2-63
cpu traffic qos dscp command 2-67
cpu traffic qos precedence command 2-72
cpu traffic qos qos-group command 2-75
D
DC power supply 2-343
debug backup command B-2
debug dot1x command B-3
debug etherchannel command B-4
debug interface command B-7
debug ip dhcp snooping command B-8
debug ip igmp filter command B-9
debug ip igmp max-groups command B-10
debug ip igmp snooping command B-11
debug ip sla error twamp connection command B-12
debug ip sla error twamp control reflector command B-14
debug ip sla error twamp control server command B-16
debug ip sla error twamp session command B-18
debug ip sla trace twamp connection command B-20
debug ip sla trace twamp control reflector command B-22
debug ip sla trace twamp control server command B-24
debug ip sla trace twamp session command B-26
debug ip verify source packet command B-28
debug lacp command B-29
debug mac-notification command B-30
debug matm command B-31
debug matm move update command B-32
debug monitor command B-33
debug mvrdbg command B-34
debug nvram command B-35
debug pagp command B-36
debug platform acl command B-37
debug platform backup interface command B-39
debug platform cfm command B-38
debug platform cpu-queues command B-40
debug platform dot1x command B-42
debug platform etherchannel command B-43
debug platform forw-tcam command B-44
debug platform ip arp inspection command B-45
debug platform ipc command B-54
debug platform ip dhcp command B-46
debug platform ip igmp snooping command B-47
debug platform ip multicast command B-49
debug platform ip source-guard command B-51
debug platform led command B-55
debug platform matm command B-56
debug platform messaging application command B-57
debug platform phy command B-58
debug platform pm command B-60
debug platform policer cpu uni-eni command B-62
debug platform port-asic command B-63
debug platform port-security command B-64
debug platform qos-acl-tcam command B-65
debug platform qos-manager command B-66
debug platform remote-commands command B-67
debug platform rep command B-68
debug platform resource-manager command B-69
debug platform snmp command B-70
debug platform span command B-71
debug platform supervisor-asic command B-72
debug platform sw-bridge command B-73
debug platform tcam command B-74
debug platform udld command B-76
debug platform vlan command B-77
debug pm command B-78
debug port-security command B-80
debug qos-manager command B-81
debug spanning-tree bpdu command B-84
debug spanning-tree bpdu-opt command B-85
debug spanning-tree command B-82
debug spanning-tree mstp command B-86
debug spanning-tree switch command B-88
debug sw-vlan command B-90
debug sw-vlan ifs command B-91
debug sw-vlan notification command B-92
debug udld command B-94
debug vqpc command B-96
default policer configuration
NNIs C-29
UNIs C-27
define interface-range command 2-77
delete (boot loader) command A-7
delete command 2-79
deny (ARP access-list configuration) command 2-80
deny (IPv6) command 2-82
deny command 2-88
detect mechanism, causes 2-116
DHCP snooping
accepting untrusted packets from edge switch 2-172
enabling
on a VLAN 2-178
trust on an interface 2-176
error recovery timer 2-118
rate limiting 2-175
DHCP snooping binding database
binding file, configuring 2-168
bindings
adding 2-166
deleting 2-166
displaying 2-475
clearing database agent statistics 2-41
database agent, configuring 2-168
displaying
binding entries 2-475
database agent status 2-477, 2-479
renewing 2-358
diagnostic monitor command 2-91
diagnostic schedule test command 2-93
diagnostic start test command 2-95
differentiated service code point
Digital Optical Monitoring
dir (boot loader) command A-8
directories, deleting 2-79
DoM
displaying supported transceivers 2-465, 2-610, 2-611
domains, CFM 2-308
dot1x default command 2-97
dot1x host-mode command 2-98
dot1x initialize command 2-100
dot1x max-req command 2-101, 2-102
dot1x port-control command 2-103
dot1x re-authenticate command 2-105
dot1x reauthentication command 2-106
dot1x supplicant force-multicast command 2-107
dot1x system-auth-control command 2-108
dot1x test eapol-capable command 2-109
dot1x test timeout command 2-110
dot1x timeout command 2-111
dot1x violation-mode command 2-113
dropping packets, with ACL matches 2-5
drop threshold, Layer 2 protocol tunneling 2-241
DSCP
as match criteria for QoS groups 2-285, 2-291
for QoS traffic marking 2-387
setting in policy maps 2-387
dual IPv4 and IPv6 templates 2-315
dual-purpose uplink ports, selecting the type 2-296
duplex command 2-114
dynamic-access ports
configuring 2-673
restrictions 2-674
dynamic ARP inspection
ARP ACLs
apply to a VLAN 2-152
define 2-17
deny packets 2-80
display 2-402
permit packets 2-313
clear
log buffer 2-39
statistics 2-40
display
ARP ACLs 2-402
configuration and operating state 2-470
log buffer 2-470
statistics 2-470
trust state and rate limit 2-470
enable per VLAN 2-161
error detection for 2-116
error recovery timer 2-118
log buffer
clear 2-39
configure 2-156
display 2-470
rate-limit incoming ARP packets 2-154
statistics
clear 2-40
display 2-470
trusted interface state 2-158
type of packet logged 2-162
validation checks 2-159
Dynamic Host Configuration Protocol (DHCP)
E
EAP-request/identity frame
maximum number to send 2-102
response time before retransmitting 2-111
E-LMI
enabling 2-121
mapping 2-123
environment variables, displaying 2-403
errdisable detect cause command 2-116
errdisable recovery command 2-118
error conditions, displaying 2-435
error disable detection 2-116
error-disabled interfaces, displaying 2-453
EtherChannel
assigning Ethernet interface to channel group 2-29
creating port-channel logical interface 2-141
debug EtherChannel/PAgP, display B-4
debug platform-specific events, display B-43
displaying 2-439
enabling Layer 2 protocol tunneling for
LACP 2-242
PAgP 2-242
UDLD 2-242
interface information, displaying 2-453
LACP
clearing channel-group information 2-46
debug messages, display B-29
displaying 2-510
modes 2-29
port priority for hot-standby ports 2-245
restricting a protocol 2-33
system priority 2-247
load-distribution methods 2-339
PAgP
aggregate-port learner 2-309
clearing channel-group information 2-50
debug messages, display B-36
displaying 2-554
error detection for 2-116
error recovery timer 2-118
learn method 2-309
modes 2-29
physical-port learner 2-309
priority of interface for transmitted traffic 2-311
Ethernet controller, internal register display 2-410
ethernet evc command 2-120
ethernet lmi ce-vlan map command 2-121, 2-123
ethernet lmi command 2-121
ethernet lmi global command 2-121
Ethernet Local Management Interface
ethernet loopback interface configuration command 2-125
ethernet loopback privileged EXEC command 2-128
ethernet oam remote-failure command 2-130
Ethernet service
debugging B-5
displaying 2-444
Ethernet service instance 2-377
Ethernet service interfaces 2-447
Ethernet statistics, collecting 2-373
Ethernet UNI configuration 2-132
ethernet uni id command 2-134
Ethernet virtual connections
EVC configuration mode 2-120
EVCs 2-120
and VLANs 2-132
service instances 2-377
UNI counts 2-720
EVC service
point-to-multipoint 2-720
point-to-point 2-720
exceed-action command 2-135
extended-range VLANs
and allowed VLAN list 2-698
configuring 2-726
extended system ID for STP 2-628
external alarms, configuring 2-7
F
failure logging data
clearing 2-47
copying 2-61
fan information, displaying 2-431
files, deleting 2-79
flash_init (boot loader) command A-10
Flex Links
configuring 2-675
configuring preferred VLAN 2-677
displaying 2-453
flowcontrol command 2-137
format (boot loader) command A-11
forwarding packets, with ACL matches 2-5
forwarding results, display C-8
frame forwarding information, displaying C-8
front-end controller counter and status information C-10
fsck (boot loader) command A-12
G
global configuration mode 1-2, 1-3
H
hardware ACL statistics 2-398
health-monitoring diagnostic testing 2-91
help (boot loader) command A-13
host connection, port configuration 2-681
host ports, private VLANs 2-685
hw-module module logging onboard command 2-139
I
IEEE 802.1ag Connectivity Fault Management
IEEE 802.1Q trunk ports and native VLANs 2-731
IEEE 802.1Q tunnel ports
configuring 2-682
displaying 2-427
limitations 2-683
IEEE 802.1x
and switchport modes 2-683
violation error recovery 2-118
See also port-based authentication
IGMP filters
applying 2-181
debug messages, display B-9
IGMP groups, setting maximum 2-183
IGMP maximum groups, debugging B-10
IGMP profiles
creating 2-185
displaying 2-482
IGMP snooping
adding ports as a static member of a group 2-200
displaying 2-483, 2-487, 2-489
enabling 2-187
enabling the configurable-leave timer 2-189
enabling the Immediate-Leave feature 2-197
flooding query count 2-195
interface topology change notification behavior 2-196
multicast table 2-485
querier 2-191
query solicitation 2-195
report suppression 2-193
switch topology change notification behavior 2-195
images
Immediate-Leave feature, MVR 2-305
immediate-leave processing 2-197
Immediate-Leave processing, IPv6 2-237
input policy maps
and ACL classification 2-283
and aggregate policers 2-330
commands not supported in 2-337
configuration guidelines 2-337
interface command 2-145
interface configuration mode 1-2, 1-4
interface port-channel command 2-141
interface range command 2-143
interface-range macros 2-77
interfaces
assigning Ethernet interface to channel group 2-29
configuring 2-114
configuring multiple 2-143
creating port-channel logical 2-141
debug messages, display B-7
disabling 2-605
displaying the MAC address table 2-535
restarting 2-605
interface speed, configuring 2-666
internal registers, displaying 2-410, 2-417
Internet Group Management Protocol
invalid GBIC
error detection for 2-116
error recovery timer 2-118
ip address command 2-150
IP addresses, setting 2-150
IP address matching 2-281
ip arp inspection filter vlan command 2-152
ip arp inspection limit command 2-154
ip arp inspection log-buffer command 2-156
ip arp inspection trust command 2-158
ip arp inspection validate command 2-159
ip arp inspection vlan command 2-161
ip arp inspection vlan logging command 2-162
IP DHCP snooping
ip dhcp snooping binding command 2-166
ip dhcp snooping command 2-165
ip dhcp snooping database command 2-168
ip dhcp snooping information option allow-untrusted command 2-172
ip dhcp snooping information option command 2-170
ip dhcp snooping information option format remote-id command 2-174
ip dhcp snooping limit rate command 2-175
ip dhcp snooping trust command 2-176
ip dhcp snooping verify command 2-177
ip dhcp snooping vlan command 2-178
ip dhcp snooping vlan information option format-type circuit-id string command 2-179
ip igmp filter command 2-181
ip igmp max-groups command 2-183, 2-210, 2-212
ip igmp profile command 2-185
ip igmp snooping command 2-187
ip igmp snooping last-member-query-interval command 2-189
ip igmp snooping querier command 2-191
ip igmp snooping report-suppression command 2-193
ip igmp snooping tcn command 2-195
ip igmp snooping tcn flood command 2-196
ip igmp snooping vlan immediate-leave command 2-197
ip igmp snooping vlan mrouter command 2-198
ip igmp snooping vlan static command 2-200
IP multicast addresses 2-302
IP precedence, as match criteria for QoS groups 2-287
ip sla responder twamp command 2-202
ip sla server twamp command 2-204
ip source binding command 2-206
IP source guard
disabling 2-214
displaying
binding entries 2-496
configuration 2-497
enabling 2-214
static IP source bindings 2-206
IP source guard, displaying dynamic binding entries 2-475
ip ssh command 2-208
IPv6 access list, deny conditions 2-82
ipv6 access-list command 2-216
ipv6 address dhcp command 2-218
ipv6 dhcp client request vendor command 2-219
ipv6 dhcp ping packets command 2-220
ipv6 dhcp pool command 2-221
ipv6 dhcp server command 2-224
ipv6 mld snooping command 2-226
ipv6 mld snooping last-listener-query count command 2-228
ipv6 mld snooping last-listener-query-interval command 2-230
ipv6 mld snooping listener-message-suppression command 2-232
ipv6 mld snooping robustness-variable command 2-233
ipv6 mld snooping tcn command 2-235
ipv6 mld snooping vlan command 2-237
IPv6 SDM template 2-374
ipv6 traffic-filter command 2-239
ip verify source command 2-214
J
jumbo frames
L
l2protocol-tunnel command 2-241
l2protocol-tunnel cos command 2-244
LACP
lacp port-priority command 2-245
lacp system-priority command 2-247
Layer 2 mode, enabling 2-671
Layer 2 protocol ports, displaying 2-508
Layer 2 protocol-tunnel
error detection for 2-116
error recovery timer 2-118
Layer 2 protocol tunnel counters 2-45
Layer 2 protocol tunneling error recovery 2-242
Layer 2 traceroute
IP addresses 2-713
MAC addresses 2-710
Layer 3 mode, enabling 2-671
line configuration mode 1-2, 1-4
Link Aggregation Control Protocol
link flap
error detection for 2-116
error recovery timer 2-118
link state group command 2-249
link state track command 2-251
load-distribution methods for EtherChannel 2-339
location (global configuration) command 2-252
location (interface configuration) command 2-254
logging event command 2-256
logging file command 2-257
logical interface 2-141
loopback error
detection for 2-116
recovery timer 2-118
loop guard, for spanning tree 2-630, 2-634
M
mac access-group command 2-259
MAC access-groups, displaying 2-523
MAC access list configuration mode 2-261
mac access-list extended command 2-261
MAC access lists 2-88
MAC addresses
disabling MAC address learning per VLAN 2-264
displaying
aging time 2-529
all 2-527
dynamic 2-533
MAC address-table move updates 2-538
notification settings 2-537, 2-540
number of addresses in a VLAN 2-531
per interface 2-535
per VLAN 2-544
static 2-542
static and dynamic entries 2-525
dynamic
aging time 2-263
deleting 2-48
displaying 2-533
enabling MAC address notification 2-268
enabling MAC address-table move update 2-266
matching 2-281
static
adding and removing 2-270
displaying 2-542
dropping on an interface 2-271
tables 2-527
MAC address notification, debugging B-30
mac address-table aging-time 2-259, 2-281
mac address-table aging-time command 2-263
mac address-table learning command 2-264
mac address-table move update command 2-266
mac address-table notification command 2-268
mac address-table static command 2-270
mac address-table static drop command 2-271
macro description command 2-275
macro global command 2-276
macro global description command 2-278
macro name command 2-279
macros
adding a description 2-275
adding a global description 2-278
applying 2-276
creating 2-279
displaying 2-556
specifying parameter values 2-276
tracing 2-276
maintenance end points 2-720
mapping tables, QoS 2-706
maps
class
creating 2-37
VLAN
creating 2-729
defining 2-281
displaying 2-599
match access-group command 2-283
match cos command 2-284
match ip dscp command 2-285
match ip precedence command 2-287
match qos-group command 2-289
match vlan command 2-291
maximum transmission unit
mdix auto command 2-294
ME 34000EG-2CS switch policers C-26
ME 3400E-24TS switch policers C-26, C-27
ME 3400EG-12CS switch policers C-26
media-type command 2-296
memory (boot loader) command A-14
mgmt_clr (boot loader) command A-15
mgmt_init (boot loader) command A-16, A-17
mkdir (boot loader) command A-18
MLD snooping
configuring queries 2-228, 2-230
configuring topology change notification 2-235
enabling 2-226
MLD snooping on a VLAN, enabling 2-237
mode, MVR 2-302
modes, commands 1-1
monitor session command 2-298
more (boot loader) command A-19
MSTP
interoperability 2-56
link type 2-632
MST region
aborting changes 2-638
applying changes 2-638
configuration name 2-638
configuration revision number 2-639
current or pending display 2-639
MST configuration mode 2-638
VLANs-to-instance mapping 2-638
path cost 2-640
protocol mode 2-636
restart protocol migration process 2-56
root port
loop guard 2-630
preventing from becoming designated 2-630
restricting which can be root 2-630
root guard 2-630
root switch
affects of extended system ID 2-628
interval between BDPU messages 2-645
interval between hello BPDU messages 2-643, 2-654
max-age 2-645
maximum hop count before discarding BPDU 2-647
port priority for selection of 2-649
primary or secondary 2-654
switch priority 2-652
state changes
blocking to forwarding state 2-661
enabling BPDU filtering 2-620, 2-658
enabling BPDU guard 2-622, 2-658
enabling Port Fast 2-658, 2-661
forward-delay time 2-642
length of listening and learning states 2-642
rapid transition to forwarding 2-632
shutting down Port Fast-enabled ports 2-658
state information display 2-577
MTU
configuring size 2-704
displaying global setting 2-586
multicast group address, MVR 2-305
multicast groups, MVR 2-303
Multicast Listener Discovery
multicast router learning method 2-198
multicast router ports, configuring 2-198
multicast router ports, IPv6 2-237
multicast storm control 2-668
multicast VLAN, MVR 2-303
multicast VLAN registration
multiple hosts on authorized port 2-98
Multiple Spanning Tree Protocol
multiplexing, UNI 2-132
MVR
and address aliasing 2-303
configuring 2-302
configuring interfaces 2-305
debug messages, display B-34
displaying 2-548
displaying interface information 2-550
members, displaying 2-552
mvr (global configuration) command 2-302
mvr (interface configuration) command 2-305
mvr vlan group command 2-306
N
native VLANs 2-698
native VLAN tagging 2-731
network node interface 2-341
nonegotiate, speed 2-666, 2-667
non-IP protocols
denying 2-88
forwarding 2-320
non-IP traffic access lists 2-261
non-IP traffic forwarding
denying 2-88
permitting 2-320
normal-range VLANs 2-726
no vlan command 2-726
O
OAM PDUs 2-130
OAM protocol 2-308
oam protocol cfm svlan command 2-308
on-board failure logging, displaying 2-519
on-board failure logging, enabling 2-139
online diagnostics
enabling
scheduling 2-93
global configuration mode
clearing test-based testing schedule 2-93
setting test-based testing 2-93
setting up test-based testing 2-93
removing scheduling 2-93
scheduled switchover
disabling 2-93
enabling 2-93
setting test interval 2-93
starting testing 2-95
online diagnostic tests, displaying results 2-423
online diagnostic tests, starting 2-95
operation, administration, and maintenance protocol
output policy maps
and QoS group classification 2-289
and traffic shaping 2-396
commands not supported in 2-337
configuration guidelines 2-337
priority in 2-346
queue limit in 2-353
P
PAgP
pagp learn-method command 2-309
pagp port-priority command 2-311
parent policy maps 2-383
password-recovery mechanism, enabling and disabling 2-379
permit (ARP access-list configuration) command 2-313
permit (IPv6) command 2-315
permit command 2-320
per-VLAN spanning-tree plus
physical-port learner 2-309
PID, displaying 2-469
PIM-DVMRP, as multicast router learning method 2-198
police
multiple conform actions for a class 2-59
multiple exceed actions for a class 2-135
multiple violate actions for a class 2-724
with priority 2-323
police aggregate command 2-332
police command 2-323
policer aggregate command 2-328
policer configuration
default for NNIs C-29
default for UNIs C-27
policer cpu uni command 2-334
policers
for CPU protection 2-334
individual 2-323
policy-map class, configuring multiple actions 2-59, 2-135, 2-724
policy-map class configuration mode 2-35
policy-map class police configuration mode 2-59, 2-326
policy-map command 2-336
policy-map configuration mode 2-336
policy maps
and CoS classification 2-284
and DSCP classification 2-285
and IP precedence classification 2-287
and policing 2-326
applying 2-381
applying to an interface 2-337, 2-381, 2-393
child 2-383
creating 2-336
displaying 2-562
hierarchical 2-383
parent 2-383
policy maps (continued)
policers
for a single class 2-323
for multiple classes 2-328, 2-332, 2-334, 2-383
setting priority 2-345
setting QoS group identifier 2-391
traffic classification, defining 2-35
traffic marking
setting CoS values 2-385
setting DSCP values 2-387
setting IP precedence values 2-389
Port Aggregation Protocol
port-based authentication
AAA method list 2-3
configuring violation modes 2-113
debug messages, display B-3
enabling 802.1x
globally 2-108
per interface 2-103
host modes 2-98
IEEE 802.1x AAA accounting methods 2-1
initialize an interface 2-100, 2-110
manual control of authorization state 2-103
multiple hosts on authorized port 2-98
periodic re-authentication
enabling 2-106
time between attempts 2-111
quiet period between failed authentication exchanges 2-111
re-authenticating 802.1x-enabled ports 2-105
resetting configurable 802.1x parameters 2-97
switch-to-authentication server retransmission time 2-111
switch-to-client frame-retransmission number2-101to 2-102
switch-to-client retransmission time 2-111
test for IEEE 802.1x readiness 2-109
port-channel load-balance command 2-339
Port Fast, for spanning tree 2-661
port ranges, defining 2-47, 2-61, 2-77
ports, debugging B-78
ports, protected 2-696
port security
aging 2-692
debug messages, display B-80
enabling 2-688
violation error recovery 2-118
port shaping 2-397
port-type command 2-341
port types, MVR 2-305
power information, displaying 2-431
power-supply alarm indications, configuring 2-343
power-supply dual command 2-343
power-supply status, displaying 2-431
precedence
for QoS traffic marking 2-389
setting in policy maps 2-389
priority command 2-345
priority queuing, QoS 2-345
priority with police, QoS 2-345
private-vlan command 2-348
private-vlan mapping command 2-351
private VLANs
association 2-694
configuring 2-348
configuring ports 2-685
displaying 2-594
host ports 2-685
mapping
configuring 2-694
displaying 2-453
promiscuous ports 2-685
product identification information, displaying 2-469
promiscuous ports, private VLANs 2-685
PVST+
Q
QoS
aggregate policers
applying 2-332
creating 2-328
displaying 2-558
class maps
creating 2-37
defining the match criteria 2-284
displaying 2-407
conform actions, configuring 2-60
displaying statistics for 2-562, C-35
exceed actions, configuring 2-136
policy maps
applying an aggregate policer 2-328, 2-332, 2-334, 2-383
applying to an interface 2-381, 2-393
creating 2-336
defining policers 2-323
displaying policy maps 2-562
setting CoS values 2-385
setting DSCP values 2-387
setting IP precedence values 2-389
setting QoS group identifier 2-391
traffic classifications 2-35
table maps
configuring 2-706
displaying 2-587
violate actions, configuring 2-725
QoS groups
as match criteria 2-289
for QoS traffic classification 2-391
setting in policy maps 2-391
QoS match criteria
ACLs 2-283
CoS value 2-284
precedence value 2-287
QoS group number 2-289
quality of service
querytime, MVR 2-302
queue-limit command 2-353
R
rapid per-VLAN spanning-tree plus
rapid PVST+
re-authenticating 802.1x-enabled ports 2-105
re-authentication
periodic 2-106
time between attempts 2-111
receiver ports, MVR 2-305
receiving flow-control packets 2-137
recovery mechanism
causes 2-118
timer interval 2-119
remote-span command 2-356
Remote Switched Port Analyzer
rename (boot loader) command A-20
renew ip dhcp snooping database command 2-358
rep admin vlan command 2-359
rep block port command 2-360
rep lsl-age-timer command 2-363
rep preempt delay command 2-365
rep preempt segment command 2-367
rep segment command 2-368
rep stcn command 2-371
reset (boot loader) command A-21
resource templates, displaying 2-575
rmdir (boot loader) command A-22
rmon collection stats command 2-373
root guard, for spanning tree 2-630
routed ports
IP addresses on 2-151
number supported 2-151
RSPAN
configuring 2-298
displaying 2-546
filter RSPAN traffic 2-298
remote-span command 2-356
sessions
add interfaces to 2-298
displaying 2-546
start new 2-298
S
scheduled switchover
disabling 2-93
enabling 2-93
scheduling diagnostic tests 2-93
sdm prefer command 2-374
SDM templates
allowed resources 2-375
displaying 2-575
dual IPv4 and IPv6 2-374
secure ports, limitations 2-690
sending flow-control packets 2-137
service instance command 2-377
service instances, displaying 2-445
service password-recovery command 2-379
service policy (policy-map class configuration) command 2-383
service-policy interface configuration command 2-381
service-policy policy-map class configuration command 2-383
set (boot loader) command A-23
set cos command 2-385
set dscp command 2-387
set precedence command 2-389
set qos-group command 2-391
setup command 2-393
SFPs, displaying information about 2-469
shape average command 2-396
show access-lists command 2-398
show aggregate-policer command 2-587
show archive status command 2-401
show arp access-list command 2-402
show boot command 2-403
show class-map command 2-407
show controllers cpu-interface command 2-408
show controllers ethernet-controller command 2-410
show controllers tcam command 2-417
show controllers utilization command 2-419
show controller utilization command 2-419
show cpu traffic qos command 2-421
show diagnostic command 2-423
show dot1q-tunnel command 2-427
show dot1x command 2-428
show env command 2-431
show errdisable detect command 2-433
show errdisable flap-values command 2-435
show errdisable recovery command 2-437
show etherchannel command 2-439
show ethernet loopback command 2-442
show ethernet service evc command 2-444
show ethernet service instance command 2-445
show ethernet service interface command 2-447
show flowcontrol command 2-449
show idprom command 2-451
show interface rep command 2-463
show interfaces command 2-453
show interfaces counters command 2-461
show interfaces rep command 2-463
show interface transceivers command 2-465
show inventory command 2-469
show ip arp inspection command 2-470
show ipc command 2-499
show ip dhcp snooping binding command 2-475
show ip dhcp snooping command 2-474
show ip dhcp snooping database command 2-477, 2-479
show ip igmp profile command 2-482
show ip igmp snooping command 2-483
show ip igmp snooping command querier detail 2-489
show ip igmp snooping groups command 2-485
show ip igmp snooping mrouter command 2-487
show ip igmp snooping querier command 2-489
show ip igmp snooping querier detail command 2-489
show ip sla standards command 2-491
show ip sla twamp connection 2-421
show ip sla twamp connection command 2-492
show ip sla twamp session command 2-494
show ip source binding command 2-496
show ipv6 access-list command 2-503
show ipv6 dhcp conflict command 2-505
show ipv6 route updated command 2-506
show ip verify source command 2-497
show l2protocol-tunnel command 2-508
show lacp command 2-510
show link state group command 2-514
show location command 2-516
show logging onboard command 2-519
show mac access-group command 2-523
show mac address-table address command 2-527
show mac address-table aging time command 2-529
show mac address-table command 2-525
show mac address-table count command 2-531
show mac address-table dynamic command 2-533
show mac address-table interface command 2-535
show mac address-table learning command 2-537
show mac address-table move update command 2-538
show mac address-table notification command 2-49, 2-540, B-32
show mac address-table static command 2-542
show mac address-table vlan command 2-544
show monitor command 2-546
show mvr command 2-548
show mvr interface command 2-550
show mvr members command 2-552
show pagp command 2-554
show parser macro command 2-556
show platform acl command C-2
show platform backup interface command C-3
show platform cfm command C-4
show platform configuration command C-5
show platform dl command C-6
show platform etherchannel command C-7
show platform forward command C-8
show platform frontend-controller command C-10
show platform igmp snooping command C-11
show platform ipc trace command C-16
show platform ip multicast command C-13
show platform ip unicast command C-14
show platform ipv6 unicast command C-17
show platform l2pt dm command C-19
show platform layer4op command C-20, C-42
show platform mac-address-table command C-21
show platform messaging command C-22
show platform monitor command C-23
show platform mvr table command C-24
show platform pm command C-25
show platform policer cpu command C-26
show platform port-asic command C-30
show platform port-security command C-34
show platform qos command C-35
show platform resource-manager command C-38
show platform snmp counters command C-40
show platform spanning-tree synchronization command C-41
show platform stp-instance command C-43
show platform tcam command C-44
show platform vlan command C-47
show platform vlan mapping command C-48
show policer aggregate command 2-558
show policer cpu uni-eni command 2-559
show policy-map command 2-562
show policy-map interface output fields 2-566
show port security command 2-567
show port-type command 2-570
show rep topology command 2-572
show sdm prefer command 2-575
show spanning-tree command 2-577
show storm-control command 2-584
show system mtu command 2-586
show udld command 2-589
show version command 2-592
show vlan access-map command 2-599
show vlan command 2-594
show vlan command, fields 2-596
show vlan filter command 2-600
show vlan mapping command 2-601
show vmps command 2-603
shutdown command 2-605
shutdown threshold, Layer 2 protocol tunneling 2-241
shutdown vlan command 2-606
SNMP host, specifying 2-612
SNMP informs, enabling the sending of 2-608
snmp mib rep trap-rate command 2-607
snmp-server enable traps command 2-608
snmp-server host command 2-612
snmp trap mac-notification change command 2-616
SNMP traps
enabling MAC address notification trap 2-616
enabling the MAC address notification feature 2-268
enabling the sending of 2-608
software images
deleting 2-79
downloading 2-9
upgrading 2-9
uploading 2-15
software version, displaying 2-592
source ports, MVR 2-305
SPAN
configuring 2-298
debug messages, display B-33
displaying 2-546
filter SPAN traffic 2-298
sessions
add interfaces to 2-298
displaying 2-546
start new 2-298
spanning-tree bpdufilter command 2-618, 2-620
spanning-tree bpduguard command 2-622
spanning-tree cost command 2-624
spanning-tree etherchannel command 2-626
spanning-tree extend system-id command 2-628
spanning-tree guard command 2-630
spanning-tree link-type command 2-632
spanning-tree loopguard default command 2-634
spanning-tree mode command 2-636
spanning-tree mst configuration command 2-638
spanning-tree mst cost command 2-640
spanning-tree mst forward-time command 2-642
spanning-tree mst hello-time command 2-643
spanning-tree mst max-age command 2-645
spanning-tree mst max-hops command 2-647
spanning-tree mst port-priority command 2-649
spanning-tree mst pre-standard command 2-651
spanning-tree mst priority command 2-652
spanning-tree mst root command 2-654
spanning-tree portfast (global configuration) command 2-658
spanning-tree portfast (interface configuration) command 2-661
spanning-tree port-priority command 2-656
Spanning Tree Protocol
spanning-tree vlan command 2-663
speed command 2-666
SSH, configuring version 2-208
static-access ports, configuring 2-673
statistics, Ethernet group 2-373
sticky learning, enabling 2-688
storm-control command 2-668
STP
counters, clearing 2-55
debug messages, display
MSTP B-86
optimized BPDUs handling B-85
spanning-tree activity B-82
switch shim B-88
transmitted and received BPDUs B-84
enabling on ENIs 2-618
enabling protocol tunneling for 2-241
EtherChannel misconfiguration 2-626
extended system ID 2-628
path cost 2-624
protocol modes 2-636
root port
loop guard 2-630
preventing from becoming designated 2-630
restricting which can be root 2-630
root guard 2-630
root switch
affects of extended system ID 2-628, 2-664
hello-time 2-663
interval between BDPU messages 2-663
interval between hello BPDU messages 2-663
max-age 2-663
port priority for selection of 2-656
primary or secondary 2-663
switch priority 2-663
state changes
blocking to forwarding state 2-661
enabling BPDU filtering 2-620, 2-658
enabling BPDU guard 2-622, 2-658
enabling Port Fast 2-658, 2-661
enabling timer to recover from error state 2-118
forward-delay time 2-663
length of listening and learning states 2-663
shutting down Port Fast-enabled ports 2-658
state information display 2-577
SVIs, creating 2-145
Switched Port Analyzer
switching characteristics
modifying 2-671
returning to interfaces 2-671
switchport access command 2-673
switchport backup interface command 2-675
switchport block command 2-679
switchport command 2-671
switchport host command 2-681
switchport mode command 2-682
switchport mode private-vlan command 2-685
switchport port-security aging command 2-692
switchport port-security command 2-688
switchport private-vlan command 2-694
switchport protected command 2-696
switchports, displaying 2-453
switchport trunk command 2-698
switchport vlan mapping command 2-700
system env temperature threshold yellow command 2-703
system message logging, save message to flash 2-257
system mtu command 2-704
system resource templates 2-374
T
table-map command 2-706
table-map configuration mode 2-706
table maps
configuring 2-706
displaying 2-587
QoS 2-706
tar files, creating, listing, and extracting 2-12
TDR, running 2-708
temperature information, displaying 2-431
temperature status, displaying 2-431
templates, system resources 2-374
test cable-diagnostics tdr command 2-708
traceroute mac command 2-710
traceroute mac ip command 2-713
traffic shaping, QoS 2-396
trunking, VLAN mode 2-682
trunk mode 2-682
trunk ports 2-682
tunnel ports, Layer 2 protocol, displaying 2-508
type (boot loader) command A-26
U
UDLD
debug messages, display B-94
enable globally 2-715
enable per interface 2-717
error recovery timer 2-118
message timer 2-715
reset a shutdown interface 2-719
status 2-589
udld command 2-715
udld port command 2-717
udld reset command 2-719
UNI
bundling and multiplexing 2-132
Ethernet 2-132
unicast storm control 2-668
uni count command 2-720
UniDirectional Link Detection
UNI ID, Ethernet 2-134
uni-vlan command 2-722
unknown multicast traffic, preventing 2-679
unknown unicast traffic, preventing 2-679
unset (boot loader) command A-27
upgrading
software images 2-9
monitoring status of 2-401
user EXEC mode 1-2
user network interface 2-341
V
version (boot loader) command A-29
violate-action command 2-724
vlan access-map command 2-729
VLAN access map configuration mode 2-729
VLAN access maps
actions 2-5
displaying 2-599
vlan command 2-726
VLAN configuration mode
commands 2-726
description 1-4
entering 2-726
summary 1-2
vlan dot1q tag native command 2-731
vlan filter command 2-733
VLAN filters, displaying 2-600
VLAN ID range 2-726
VLAN ID translation
VLAN mapping
configuring 2-700
described 2-701
displaying 2-601
VLAN maps
applying 2-733
creating 2-729
defining 2-281
displaying 2-599
VLAN Query Protocol
VLANs
adding 2-726
configuring 2-726
debug messages, display
activation of B-92
VLAN IOS file system error tests B-91
VLAN manager activity B-90
displaying configurations 2-594
extended-range 2-726
MAC addresses
displaying 2-544
number of 2-531
normal-range 2-726
private 2-685
configuring 2-348
displaying 2-594
restarting 2-606
saving the configuration 2-726
shutting down 2-606
suspending 2-606
VMPS
configuring servers 2-738
displaying 2-603
error recovery timer 2-119
reconfirming dynamic VLAN assignments 2-735
vmps reconfirm (global configuration) command 2-736
vmps reconfirm (privileged EXEC) command 2-735
vmps retry command 2-737
vmps server command 2-738
VQP
and dynamic-access ports 2-674
clearing client statistics 2-58
displaying information 2-603
per-server retry count 2-737
reconfirmation interval 2-736
reconfirming dynamic VLAN assignments 2-735
VTP, enabling tunneling for 2-241
W
Weighted Tail Drop
WTD, queue-limit command 2-353
Feedback