Appendix A: Supported Features for Conversion
A. Supported Features for Conversion from UCS to IMM
This section provides a list of features that are supported for conversion in the IMM Transition Tool and a policy mapping between Cisco UCS Manager/Central and Intersight.
![]() Note |
If the UCS Central configuration contains VLAN/VSAN aliasing, the IMM Transition Tool will automatically select one of the aliases when performing the conversion of the vNICs/vHBAs. Please review the resulting configuration carefully to make sure it is appropriate. |
UCS Manager/ UCS Central Feature Category | Source UCS Manager/UCS Central Feature Name | Equivalent IMM Policy |
---|---|---|
Admin | Communication Services *3 | SNMP Policy |
Organizations | Intersight Organizations | |
Syslog *4 | Syslog Policy | |
Time zone Management | NTP Policy | |
MAC Address Table Aging | Switch Control Policy | |
VLAN Port Count Optimization | Switch Control Policy | |
Inband Profile VLAN Group | Ethernet Network Group Policy | |
Inband Profile Network | IMC Access Policy | |
Inband Profile IP Pool Name | IMC Access Policy | |
FC Uplink Trunking | VSAN Policy | |
DNS *5 | Network Connectivity Policy | |
Server Policies and Chassis Policies | BIOS Policies | BIOS Policy |
Boot Policies |
Boot Policy iSCSI Static Target Policy |
|
Disk Group Policies | Storage Policy | |
IPMI Access Profiles | IPMI over LAN Policy | |
iSCSI Adapter Policies | iSCSI Adapter Policy | |
iSCSI Boot Policies | iSCSI Boot Policy | |
KVM Management Policies | Virtual KVM Policy | |
Local Disk Config Policies *6 | Storage Policy, SD Card Policy | |
QoS Policies | Ethernet QoS Policy/ FC QoS Policy | |
Serial over LAN Policies | Serial over LAN Policy | |
Service Profiles | Server Profile | |
Service Profile Templates *7 | Server Profile Template | |
Storage Profiles | Storage Policy | |
vMedia Policies | Virtual Media Policy | |
vNIC/vHBA Placement Policies *8 | LAN Connectivity Policy/SAN Connectivity Policy | |
Ethernet Adapter Policies | Ethernet Adapter Policy | |
Flow Control Policies | Flow Control Policy | |
LACP Policies | Link Aggregation Policy | |
LAN Connectivity Policies | LAN Connectivity Policy | |
Link Protocol Policies | Switch Control Policy | |
Multicast Policies | Multicast Policy | |
Network Control Policies | Ethernet Network Control Policy | |
Fibre Channel Adapter Policies | Fibre Channel Adapter Policy | |
SAN Connectivity Policies | SAN Connectivity Policy | |
Storage Connection Policies |
FC Zoning Policy |
|
Pools | IP Pools | IP Pool |
IQN Suffix Pools | IQN Pool | |
MAC Pools | MAC Pool | |
WWNN Pools | WWNN Pool | |
WWPN Pools | WWPN Pool | |
Server Pools *9 |
Resource Pool |
Following table lists the UCS Manager features that are supported for conversion in the IMM Transition Tool.
UCS Manager Feature Category | Source UCS Manager Feature Name | Equivalent IMM Policy |
---|---|---|
Fabric Config *₁ | Appliance VLANs | VLAN Policy |
QoS System Class | System QoS Policy | |
VLAN Groups | Ethernet Network Group Policy | |
VLANs | VLAN Policy | |
VSANs | VSAN Policy | |
Storage VSANs *9 | VSAN Policy | |
LAN/SAN Pin Group *10 | LAN/SAN Pin Group | |
Fabric Policies *2 | Appliance Network Control Policies | Ethernet Network Control Policy |
UDLD Link Policies | Link Control Policy | |
Port Roles | Appliance Ports | Port Policy |
Appliance Port-Channels | Port Policy | |
FCoE Uplink Ports | Port Policy | |
FCoE Uplink Port-Channels | Port Policy | |
LAN Uplink Ports | Port Policy | |
LAN Uplink Port-Channels | Port Policy | |
SAN Unified Ports | Port Policy | |
SAN Uplink Ports | Port Policy | |
SAN Uplink Port-Channels | Port Policy | |
Server Ports | Port Policy | |
FC Storage Ports *9 | Port Policy | |
SAN Storage Ports *9 | Port Policy | |
Breakout Port *10 | Port Policy |
*1 - Merged with regular VLANs
*2 - Merged with regular Network Control Policies
*3 - Sessions/HTTP settings are defined in Intersight Settings. Telnet/SSH settings are not supported
*4 - Only supports up to two remote destination servers
*5 - In UCS Manager, it is found under Admin > Communication Management > DNS Management
*6 - Replaced by Storage Policy. Local Disk Configuration policy supports only Manual creation not the Automatic policy option.
*7 - Only Updating Templates - no support for Initial Templates (though cloning can be achieved)
*8 - The placement is statically mapped to PCIe slots, with the following mapping:
-
vCon 1: Slot MLOM
-
vCon 2: Slot PCIe1
-
vCon 3: Slot PCIe2
-
vCon 4: Slot PCIe3
This placement can be manually adjusted as needed after conversion is performed.
*9 - Supported in IMM Transition Tool, Release 1.0.2 and above.
*10 - Supported in IMM Transition Tool, Release 3.0.1 and above.
![]() Note |
Table containing aliases for aliased VLANs/VSANs are not supported for conversion. |
B. Fabric Interconnect (FI) Mapping for Conversion
When a Port policy is converted from UCSM to IMM, the port configuration of that policy is adjusted by mapping the unsupported FI (Cisco UCS 6200 and 6300 Series) as shown below:
UCSM FI | Equivalent IMM FI |
---|---|
Cisco UCS-FI-6248UP | Cisco UCS-FI-6454 |
Cisco UCS-FI-6296UP | Cisco UCS-FI-6454 |
Cisco UCS-FI-6296 | Cisco UCS-FI-64108 |
UCS-FI-M-6324 | Cisco UCS-FI-6454 |
Cisco UCS-FI-6332 | Cisco UCS-FI-6536 |
Cisco UCS-FI-6332-16UP | Cisco UCS-FI-6536 |
Cisco UCS-FI-6454 | Cisco UCS-FI-6454 |
Cisco UCS-FI-64108 | Cisco UCS-FI-64108 |
Cisco UCS-FI-6536 | Cisco UCS-FI-6536 |
![]() Note |
|