Supported Network Adapter Cards for UCSM Mode
This chapter includes the following sections:
Overview
The following Network Adapter cards support Cisco UCS Manager integration :
Supported Adapter Cards
The following table shows the officially supported adapter cards for C-Series Rack-Mount Servers integration with Cisco UCS Manager.
Adapter/Server Model | C200 M2 | C210 M2 | C250 M2 |
---|---|---|---|
Cisco UCS P81E VIC (N2XX-ACPCI01) |
Y |
Y |
Y |
Emulex OCe10102-F CNA (N2XX-AEPCI01) |
Y |
Y |
Y |
QLogic QLE8152 CNA (N2XX-AQPCI01) |
Y |
Y |
Y |
Broadcom BCM57711 10Gb (N2XX-ABPCI02) |
Y |
Y |
Y |
Intel X520 10Gb (N2XX-AIPCI01) |
Y |
Y |
Y |
Supported Card Combinations
The following are the only supported card combinations for the servers to be used in UCSM mode.
- Only Cisco Virtual Interface Cards (VICs) installed in the server. Do not mix with CNAs or Ethernet cards.
- Only one type of CNA (Q or E) installed in the server. Do not mix with VICs or Ethernet adapters.
- Only one type of Ethernet adapter (B or I) installed in the server. Do not mix with VICs or CNAs.