Cisco UCS B260 M4 Blade Server
The UCS B260 M4 Blade Server is a full-width blade that is formed from the following parts:
-
One UCS Scalable Blade Module
-
One UCS Scalability Terminator that attaches to the front of the UCS Scalable Blade Module
The following table lists the features of the Cisco UCS B260 M4 Blade Server.
Feature |
UCS B260 M4 with Intel Xeon E7 v4 CPU |
---|---|
Base server PID |
UCSB-EX-M4-3 |
Form factor |
Full width |
Number of CPUs |
2 |
CPU Model |
Intel Xeon E7 v4 |
Memory type |
DDR4 DIMMs |
Memory slots |
48 |
LSI3008 SAS RAID Controller |
1 that supports 2 SAS or SATA hard drives |
Drive Quantity |
2 SSD |
Mezzanine slots |
2+ mLOM |
Secure digital (SD) cards |
2 |
Internal USB device |
1 |
Trusted platform module (TPM) |
1 |
You can install up to four Cisco UCS B260 M4 Blade Servers in the Cisco UCS 5108 server chassis.
The following figure shows the front of the Cisco UCS B260 M4 Blade Server.
![](/c/dam/en/us/td/i/300001-400000/300001-310000/305001-306000/305321.jpg)
1 |
SSD 1 |
7 |
Network link status |
2 |
SSD 2 |
8 |
Power button and LED |
3 |
Reset button |
9 |
Right ejector handle |
4 |
Beaconing button and LED |
10 |
Terminator/connector interface |
5 |
Local console connection |
11 |
Left ejector handle |
6 |
Blade health LED |
12 |
Asset tag |
The plastic asset tag pulls out of the front panel and does not interfere with the air flow of the module. A label that identifies the version of the UCS Scalable M4 Blade Module appears on the asset tag.