Adding a Non-Windows OS Image in Bare Metal Agent
This procedure creates a Non-Windows OS image template in Bare Metal Agent. You must add the OS image template before you can request a PXE boot for the OS image.
Note |
You cannot use this procedure to create supported Windows operating systems images. For more information about how to set up Windows OS images, see Adding Windows OS Images. |
Before you begin
You must have all resources and requirements in place for each operating system image that you want to install through a Bare Metal Agent PXE boot request.
Procedure
Step 1 |
Upload the Non-Windows OS image file. For more information, see Uploading an OS Image File. |
Step 2 |
Provision the Non-Windows OS image. For more information, see Provisioning an OS Image. |
Step 3 |
Navigate to /opt/cnsaroot/templates/catalogname and confirm that the PXE configuration templates are available in that location. |
Step 4 |
To verify that the OS image is created, do the following:
|