The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Port profiles contain the properties and settings that you can use to configure virtual interfaces in Cisco UCS for VM-FEX. The port profiles are created and administered in Cisco UCS Manager. After a port profile is created, assigned to, and actively used by one or more clusters, any changes made to the networking properties of the port profile in Cisco UCS Manager are immediately applied to those clusters.
1. In the Navigation pane, click VM.
2. Expand the All node.
3. Right-click the Port Profiles node and choose Create Port Profile.
4. In the Create Port Profile dialog box, complete the following fields:
5. In the VLANs area, complete the following fields:
6. Click OK.
1. In the Navigation pane, click VM.
2. Expand .
3. Right-click the port profile for which you want to modify the VLANs and choose Modify VLANs.
4. In the Modify VLANs dialog box, change one or more of the following:
5. Click OK.
Step 1 | In the Navigation pane, click VM. | ||||||||||
Step 2 | Expand . | ||||||||||
Step 3 | Right-click the port profile for which you want to modify the VLANs and choose Modify VLANs. | ||||||||||
Step 4 | In the Modify VLANs dialog box, change one or more of the following:
| ||||||||||
Step 5 | Click OK. |
1. In the Navigation pane, click VM.
2. Expand .
3. Right-click the port profile for which you want to change the native VLAN and choose Modify VLANs.
4. In the Modify VLANs dialog box, do the following:
1. In the Navigation pane, click VM.
2. Expand .
3. Right-click the port profile to which you want to add a VLAN and choose Modify VLANs.
4. In the Modify VLANs dialog box, do the following:
You can delete a VLAN from a port profile or change the VLAN that you have assigned as the native VLAN through the following steps.
1. In the Navigation pane, click VM.
2. Expand .
3. Right-click the port profile from which you want to delete a VLAN and choose Modify VLANs.
4. In the Modify VLANs dialog box, do the following:
You cannot delete a port profile if a VM is actively using that port profile.
1. In the Navigation pane, click VM.
2. Expand .
3. Right-click the port profile you want to delete and choose Delete.
4. If a confirmation dialog box displays, click Yes.
5. Click OK.
Port Profile Client
You can create a profile client.
1. In the Navigation pane, click VM.
2. Expand .
3. Right-click the port profile for which you want to create a profile client and choose Create Profile Client.
4. In the Create Profile Client dialog box, complete the following fields:
5. Click OK.
Step 1 | In the Navigation pane, click VM. | ||||||||||||
Step 2 | Expand . | ||||||||||||
Step 3 | Right-click the port profile for which you want to create a profile client and choose Create Profile Client. | ||||||||||||
Step 4 | In the
Create
Profile Client dialog box, complete the following fields:
| ||||||||||||
Step 5 | Click OK. |
You can modify a profile client.
1. In the Navigation pane, click VM.
2. Expand .
3. Click the port profile for which you want to modify the profile client.
4. In the Work pane, click the Profile Clients tab.
5. Right-click the profile client you want to modify and choose Show Navigator.
6. In the Navigator for the profile client, change the values for one or more of the following fields:
7. Click OK.
Step 1 | In the Navigation pane, click VM. | ||||||||||||
Step 2 | Expand . | ||||||||||||
Step 3 | Click the port profile for which you want to modify the profile client. | ||||||||||||
Step 4 | In the Work pane, click the Profile Clients tab. | ||||||||||||
Step 5 | Right-click the profile client you want to modify and choose Show Navigator. | ||||||||||||
Step 6 | In the Navigator for the profile client, change the values for one or more of the following fields:
| ||||||||||||
Step 7 | Click OK. |
You cannot delete a port profile client if a VM is actively using the port profile with which the client is associated.
1. In the Navigation pane, click VM.
2. Expand .
3. Click the port profile from which you want to delete a profile client.
4. In the Work pane, click the Profile Clients tab.
5. Right-click the profile client that you want to delete and choose Delete.
6. If a confirmation dialog box displays, click Yes.
7. Click Save Changes.
Step 1 | In the Navigation pane, click VM. |
Step 2 | Expand . |
Step 3 | Click the port profile from which you want to delete a profile client. |
Step 4 | In the Work pane, click the Profile Clients tab. |
Step 5 | Right-click the profile client that you want to delete and choose Delete. |
Step 6 | If a confirmation dialog box displays, click Yes. |
Step 7 | Click Save Changes. |