Power Capping in Cisco UCS
You can control the maximum power consumption on a server through power capping, as well as manage the power allocation in the Cisco UCS Manager for blade servers, UCS C220 and C240 M4/M5, and C480 M5/C480 M5 ML, rack servers, UCS Mini, and mixed UCS domains.
Cisco UCS Manager supports power capping on the following:
-
UCS 6400 Series Fabric Interconnects
-
UCS 6300 Series Fabric Interconnects
-
UCS 6324 Series Fabric Interconnects (Cisco UCS Mini)
-
UCS 6200 Series Fabric Interconnects
You can use Policy Driven Chassis Group Power Cap, or Manual Blade Level Power Cap methods to allocate power that applies to all of the servers in a chassis.
Cisco UCS Manager provides the following power management policies to help you allocate power to your servers:
Power Management Policies |
Description |
---|---|
Power Policy |
Specifies the redundancy for power supplies in all chassis in a Cisco UCS domain. |
Power Control Policies |
Specifies the priority to calculate the initial power allocation for each blade in a chassis. |
Power Save Policy |
Globally manages the chassis to maximize energy efficiency or availability. |
Global Power Allocation |
Specifies the Policy Driven Chassis Group Power Cap or the Manual Blade Level Power Cap to apply to all servers in a chassis. |
Global Power Profiling |
Specifies how the power cap values of the servers are calculated. If it is enabled, the servers will be profiled during discovery through benchmarking. This policy applies when the Global Power Allocation Policy is set to Policy Driven Chassis Group Cap. |