The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
C
commands
reboot 2-1
set hostname 2-3
update 2-2
copy 2-11
create console 8-5
create corefile 6-1
create faultpolicy 6-6
create file 8-11
create log 6-10
create monitor 8-17
create remote-destination 8-23, 8-24, 8-26
create syslog 6-14
D
delete 2-12
delete corefile 6-3
delete faultpolicy 6-7
delete log 6-11
delete syslog 6-15
dir 2-13
disable console 8-8
disable file 8-14
disable monitor 8-20
documentation
additional publications xi
E
enable console 8-6
enable file 8-12
enable monitor 8-18
I
information about
CLI 1-2
VNMC 1-1
M
modify shared-secret 2-14
R
reboot 2-1
related documents xi
restore 2-4
S
send-syslog 8-3
service reinit 2-6
service restart 2-7
service start 2-8
service status 2-9
service stop 2-10
set console level 8-9
set descr 8-1
set file 8-15
set hostname 2-3
set monitor level 8-21
set net gw 2-16
set net ip 2-15
set net netmask 2-17
show cli 2-22
show clock 2-22
show corefile 6-4
show faultpolicy 6-8
show fsm 2-27
show log 6-12
show network-interface 2-23
show providers 2-21
show syslog 6-17
show system 2-24
show tech-support 2-26
show version 2-25
T
terminal length 2-19
terminal session-timeout 2-19
U
update 2-2