The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter describes open severity 1 and 2 caveats and select severity 3 caveats:
The “Open Caveats” sections list open caveats that apply to the current release and may apply to previous releases. A caveat that is open for a prior release and is still unresolved applies to all future releases until it is resolved.
The bug IDs are sorted alphanumerically.
 Note |
The Caveats section includes the bug ID and a short description of the bug. For details on the symptoms, conditions, and workaround for a specific caveat you must use the Bug Search Tool. |
Cisco Bug Search Tool (BST), the online successor to Bug Toolkit, is designed to improve effectiveness in network risk management and device troubleshooting. You can search for bugs based on product, release, and keyword, and aggregates key data such as bug details, product, and version. For more details on the tool, see the help page located at http://www.cisco.com/web/applicat/cbsshelp/help.html .
|
Caveat ID Number |
Description |
|---|---|
|
Use Split info to set LCS Reverse Path Spectrum Capture Default Frequency |
|
|
Use Split info to set LCS Forward Path Spectrum Capture Default Frequency |
|
|
SNMP: Use Community String edited by User |
|
Caveat ID Number |
Description |
|---|---|
|
SNMP: Traps not ready to be sent |
|
|
Multiple Vulnerabilities in cURL 7.44.0 |
|
|
Multiple Vulnerabilities in python 2.7.9 |
|
|
Multiple Vulnerabilities in expat 2.1.0 |
|
|
Multiple RPC Libraries String Processing Denial of Service Vulnerability |
|
|
Reset of iNode results in 17-18 second outage of DOCSIS traffic |
|
|
Incorrect default value setting for reverse attenuator |
|
|
The iNode will not keep trying to get an IP address if its lease expires |
|
|
The frequency band low and high limit in the LCS should correlate with inode frequency split version |
|
|
Unable to connect with iPhone / iOS device after some time |
|
|
Place holder: if pilot tone @999 fails, software incorrectly sets attenuator value to 0 |
|
|
auto-setup uses port 1 calculations for all RF ports |
|
|
Values are always written to DACs every second. |
|
|
Update Spectrum Analysis Driver |
|
|
Configure confd to accept connections from IPv6 interfaces |
|
|
Autosetup improvements |
|
|
AGC averaging power readings incorrectly |
Feedback