Configure Single Sign-On

About SAML SSO Solution


Important
When deploying Cisco Jabber with Cisco Webex meeting server, Unified Communications Manager and the Webex meeting server must be in the same domain.

SAML is an XML-based open standard data format that enables administrators to access a defined set of Cisco collaboration applications seamlessly after signing into one of those applications. SAML describes the exchange of security related information between trusted business partners. It is an authentication protocol used by service providers (for example, Unified Communications Manager) to authenticate a user. SAML enables exchange of security authentication information between an Identity Provider (IdP) and a service provider.

SAML SSO uses the SAML 2.0 protocol to offer cross-domain and cross-product single sign-on for Cisco collaboration solutions. SAML 2.0 enables SSO across Cisco applications and enables federation between Cisco applications and an IdP. SAML 2.0 allows Cisco administrative users to access secure web domains to exchange user authentication and authorization data, between an IdP and a Service Provider while maintaining high security levels. The feature provides secure mechanisms to use common credentials and relevant information across various applications.

The authorization for SAML SSO Admin access is based on Role-Based Access Control (RBAC) configured locally on Cisco collaboration applications.

SAML SSO establishes a Circle of Trust (CoT) by exchanging metadata and certificates as part of the provisioning process between the IdP and the Service Provider. The Service Provider trusts the IdP's user information to provide access to the various services or applications.


Important
Service providers are no longer involved in authentication. SAML 2.0 delegates authentication away from the service providers and to the IdPs.

The client authenticates against the IdP, and the IdP grants an Assertion to the client. The client presents the Assertion to the Service Provider. Since there is a CoT established, the Service Provider trusts the Assertion and grants access to the client.

SAML SSO Configuration Task Flow

Complete these tasks to configure Unified Communications Manager for SAML SSO.

Before you begin

SAML SSO configuration requires that you configure the Identity provider (IdP) at the same time that you configure Unified Communications Manager. For IdP-specific configuration examples, see:


Note

The above links are examples only. Refer to your IdP documentation for official documentation.

Procedure

  Command or Action Purpose

Step 1

Export UC Metadata from Cisco Unified Communications Manager

To create a trust relationship, you must exchange metadata files between Unified Communications Manager and the IdP.

Step 2

Configure SAML SSO on the Identity Provider (IdP)

Complete the following tasks:

  • Upload the UC metadata file that was exported from Unified Communications Manager in order to complete the Circle of Trust relationship.

  • Configure SAML SSO on the IdP

  • Export an IdP metadata file. This file will be imported into the Unified Communications Manager

Step 3

Enable SAML SSO in Cisco Unified Communications Manager

Import your IdP metadata and enable SAML SSO in Unified Communications Manager.

Step 4

Verify the SAML SSO Configuration

Verify that SAML SSO has been configured successfully.

Export UC Metadata from Cisco Unified Communications Manager

Use this procedure to export a UC metadata file from the Service Provider (Unified Communications Manager). The metadata file will be imported into the Identity Provider (IdP) in order to build a Circle of Trust relationship.

Procedure

Step 1

From Cisco Unified CM Administration, choose System > SAML Single Sign-On

Step 2

From the SAML Single Sign-On window, choose one of the options for the SSO Mode field:

  • Cluster wide—A single SAML agreement for the cluster.

    Note

     

    If you choose this option, ensure that Tomcat servers for all the nodes in the cluster have the same certificate, which is the multi-server SAN certificate.

  • Per Node—Each node has a separate SAML agreement.

Step 3

From the SAML Single Sign-On window, choose one of the options for the Certificate field.

  • Use system generated self-signed certificate
  • Use Tomcat certificate

Step 4

Click Export All Metadata to export the metadata file.

Note

 

If you choose the Cluster wide option in Step 3, a single metadata XML file appears for a cluster for download. However, if you choose the Per Node option, one metadata XML file appears for each node of a cluster for download.

What to do next

Complete the following tasks on the IdP:

  • Upload the UC metadata file that was exported from Unified Communications Manager

  • Configure SAML SSO on the IdP

  • Export an IdP metadata file. This file will be imported into the Unified Communications Manager in order to complete the Circle of Trust relationship.

Enable SAML SSO in Cisco Unified Communications Manager

Use this procedure to enable SAML SSO on the Service Provider (Unified Communications Manager). This process includes importing the IdP metadata onto the Unified Communications Manager server.


Important
Cisco recommends that you restart Cisco Tomcat service after enabling or disabling SAML SSO.

Note

The Cisco CallManager Admin, Unified CM IM and Presence Administration, Cisco CallManager Serviceability, and Unified IM and Presence Serviceability services are restarted after you enable or disable SAML SSO.

Before you begin

Prior to completing this procedure, make sure of the following:

  • You require an exported metadata file from your IdP.

  • Make sure that the end-user data is synchronized to the Unified Communications Manager database

  • Verify that the Unified Communications Manager IM and Presence Cisco Sync Agent service has completed data synchronization successfully. Check the status of this test in Cisco Unified CM IM and Presence Administration by choosing Diagnostics > System Troubleshooter The “Verify Sync Agent has sync'ed over relevant data (e.g. devices, users, licensing information)” test indicates a "Test Passed" outcome if data synchronization has completed successfully

  • At least one LDAP synchronized user is added to the Standard CCM Super Users group to enable access to Cisco Unified Administration. For more information about synchronizing end-user data and adding LDAP-synchronized users to a group, see the “System setup” and “End user setup” sections in the Unified Communications Manager Administration Guide

Procedure

Step 1

From Cisco Unified CM Administration, choose System > SAML Single Sign-On.

Step 2

Click Enable SAML SSO and then click Continue.

A warning message notifies you that all server connections will be restarted.

Step 3

If you have configured the Cluster wide SSO mode, click the Test for Multi-server tomcat certificate button. Otherwise, you can skip this step.

Step 4

Click Next.

A dialog box that allows you to import IdP metadata appears. To configure the trust relationship between the IdP and your servers, you must obtain the trust metadata file from your IdP and import it to all your servers.

Step 5

Import the metadata file that you exported from your IdP:

  1. Browse to locate and select your exported IdP metadata file.

  2. Click Import IdP Metadata.

  3. Click Next.

  4. At the Download Server Metadata and Install on IdP screen, click Next.

    Note

     

    The Next button is enabled only if the IdP metadata file is successfully imported on at least one node in the cluster.

Step 6

Test the connection and complete the configuration:

  1. In the End User Configuration window, choose a user that is LDAP-synchronized and has the permission as "Standard CCM Super User" from the Permissions Information list box

  2. Click Run Test.

    The IdP login window appears.

    Note

     

    You cannot enable SAML SSO until the test succeeds.

  3. Enter a valid username and password.

    After successful authentication, the following message is displayed:

    SSO Test Succeeded

    Close the browser window after you see this message.

    If the authentication fails, or takes more than 60 seconds to authenticate, a "Login Failed" message appears on the IdP login window. The following message is displayed on the SAML Single Sign-On window:

    SSO Metadata Test Timed Out

    To attempt logging in to the IdP again, select another user and run another test.

  4. Click Finish to complete the SAML SSO setup.

    SAML SSO is enabled and all the web applications participating in SAML SSO are restarted. It may take one to two minutes for the web applications to restart.

Verify the SAML SSO Configuration

After you configure SAML SSO on both the Service Provider (Unified Communications Manager) and on the IdP, use this procedure on Unified Communications Manager to confirm that the configuration works.

Before you begin

Confirm the following:

  • The SAML Single Sign-On Configuration window in Unified CM Administration shows that you have successfully imported the IdP Metadata Trust file.

  • The Service Provider metadata files are installed on the IdP.

Procedure

Step 1

From the Cisco Unified CM Administration, choose System > SAML Single Sign-On and the SAML Single Sign-On Configuration window opens, click Next.

Step 2

Choose an administrative user form the Valid Administrator Usernames area and click the Run SSO Test… button.

Note

 
The user for the test must have administrator rights and has been added as a user on the IdP server. The Valid Administrator Usernames area displays a list of users, which can be drawn on to run the test.
If the test succeeds, SAML SSO is successfully configured.