Cisco Unified Communications Manager Release 14SU3
This section contains information about the new and changed features for Unified Communications Manager Release 14SU3:
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter describes new and changed JTAPI information for this release of Cisco Unified Communications Manager and features supported in the previous releases.
For more information, go to the Programming Guides website at http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_programming_reference_guides_list.html.
This section contains information about the new and changed features for Unified Communications Manager Release 14SU3:
This section contains information about the new and changed features for Unified Communications Manager Release 14SU2:
This section contains information about the new and changed features for Cisco Unified Communications Manager, Release 12.5(1):
Linux and Windows installation procedure is updated in Installing the Cisco Unified JTAPI Software section.
This section contains information about the new and changed features for Cisco Unified Communications Manager, Release 11.5(1):
Starting from Release 11.5(1)SU9 and any subsequent SU or ES releases in this release train, the Cisco JTAPI Plugin follows installer less approach. You must have JRE installed on the system before the installation. The installation runs in the command prompt and does not have a GUI. Also, the same will not be listed in the software installed list of Windows Control Panel.
![]() Note |
Cisco Spark Device has been added as a new device type for this release of Unified Communications Manager and may appear in the user's control list. However, Cisco Spark Device is not a supported device for this release of Cisco Unified JTAPI. |
This section contains information about the new and changed features for Cisco Unified Communications Manager, Release 11.0(1).
This section contains the new and changed features for Cisco Unified Communications Manager release 10.5(2):
This section describes the new and changed features in Cisco Unified Communications Manager release 9.0(1):
This section describes the new and changed features in Cisco Unified Communications Manager release 8.6(1):
New JTAPI x64 client for 64-bit operating systems.
This section describes the new and changed features in Cisco Unified Communications Manager release 8.5(1):
This section describes the new and changed features in Cisco Unified Communications Manager release 8.0(1):
This section describes the new and changed features in Cisco Unified Communications Manager release 7.1(3):
This section describes the new and changed features in Cisco Unified Communications Manager release 7.1(2):
This section describes the new and changed features in Cisco Unified Communications Manager from release 6.1 to release 7.0(1) and Cisco Unified JTAPI enhancements. It has the following sections:
Join Across Lines with Conference Enhancements (SCCP and SIP)
selectRoute() with Calling Search Space and Feature Priority
![]() Note |
Cisco Unified Communications Manager release 7.0(1) does not support the following IPv6 related methods: canSupportIPv6() setProviderOpenRetryAttempts (int retryAttempts) getProviderOpenRetryAttempts() getIPAddressingMode() (available on CiscoMediaTerminal and CiscoRouteTerminal interfaces) register(java.net.InetAddress address, int port, CiscoMediaCapability [] capabilities, int[] algorithmIDs, java.net.InetAddress address_v6, int activeAddressingMode) register(CiscoMediaCapability [] capabilities, int[] int registration Type, int[] algorithmIDs, int activeAddressingMode) getTerminals() (available on new interface CiscoProviderTermCapabilityChangedEv) getAddressingModeForMedia() getCallingPartyIpAddr_v6() (available on CiscoCallCtlConnOfferedEv and CiscoRouteEvent interfaces) CTIERR_IPADDRMODEMISMATCH CTIERR_DYNREG_IPADDRMODE_MISMATCH hasIPv6CapabilityChanged() CiscoTerminal.IP_ADDRESSING_MODE_IPv4 CiscoTerminal.IP_ADDRESSING_MODE_IPv6 CiscoTerminal.IP_ADDRESSING_MODE_IPv4_v6 CiscoTerminal.IP_ADDRESSING_MODE_Unknown CiscoTermRegistrationFailedEv.IP_ADDRESSING_MODE_MISMATCH |
![]() Note |
For the features, Join Across Lines, Do Not Disturb-Reject, and Calling Party Normalization, each Cisco JTAPI must be upgraded to a version that supports these features. Additionally, if you are upgrading from release 5.1 and you use Join Across Lines, the Conference Chaining feature must not be enabled or used until all applications are either upgraded to a version compatible with the new unified CM version. Also, you should verify that the applications are not impacted by the Conference Chaining feature. |
This section describes the new and changed features in Cisco Unified Communications Manager from release 6.0 to release 6.1 and Cisco Unified JTAPI enhancements. It has the following sections:
This section describes the new and changed features in Cisco Unified Communications Manager, release 6.0 and Cisco Unified JTAPI enhancements. It has the following sections:
This section describes the new and changed features in Cisco Unified Communications Manager, from release 5.0 to release 5.1 and Cisco Unified JTAPI enhancements. It has the following sections:
This section describes the new and changed features in Unified Communications Manager, from release 4.x to release 5.0 and Cisco Unified JTAPI enhancements. It has the following: