static int
|
ASSOCIATED_LINE_NOT_OPEN
|
This error indicates that the request is issued on a line,
which is not open
|
static int
|
CALL_ALREADY_EXISTS
|
This error indicates that another call already exists on the
line
|
static int
|
CALL_DROPPED
|
The call dropped after the feature request (hold, unhold,
transfer, or conference) but before the request was completed.
|
static int
|
CALLHANDLE_NOTINCOMINGCALL
|
This error indicates that an attempt is made to answer a call
that either does not exist or is not in the correct state
|
static int
|
CALLHANDLE_UNKNOWN_TO_ LINECONTROL
|
This error indicates that attempt to redirect call that was
unknown to line control
|
static int
|
CANNOT_OPEN_DEVICE
|
This error indicates that device open failed because the
associated device is unregistering
|
static int
|
CANNOT_TERMINATE_MEDIA_ON_PHONE
|
This error indicates that media cannot be terminated by an
application when the device is a physical phone (the phone always terminates
the media)
|
static int
|
CFWDALL_ALREADY_SET
|
This error indicates that attempt to set CFWALL while it is
already set
|
static int
|
CFWDALL_DESTN_INVALID
|
This error indicates that attempt to CFWALL to an invalid
destination
|
static int
|
CLUSTER_LINK_FAILURE
|
This error indicates that link to one of the cisco unified
communications managers failed in the cluster (network error)
|
static int
|
COMMAND_NOT_IMPLEMENTED_ON_DEVICE
|
This error indicates that device does not support the command.
|
static int
|
CONFERENCE_ALREADY_PRESENT
|
This error indicates that attempt to conference a party that
is already in conference
|
static int
|
CONFERENCE_FAILED
|
This error indicates that conference completion was not
successful.
|
static int
|
CONFERENCE_FULL
|
This error indicates that all conference bridges are busy.
|
static int
|
CONFERENCE_INACTIVE
|
This error indicates that attempt to complete conference while
consult conference is not active
|
static int
|
CONFERENCE_INVALID_PARTICIPANT
|
This error indicates that an attempt to conference to self or
an invalid participant
|
static int
|
CTIERR_ACCESS_TO_DEVICE_DENIED
|
This error indicates that the access to device is denied.
|
public static final int
|
CTIERR_ANNOUNCEMENT_ALREADY_ IN_PROGRESS
|
This error indicates that the announcement is already in
progress.
|
static int
|
CTIERR_APP_SOFTKEYS_ALREADY_ CONTROLLED
|
This error indicates that the application softkeys are already
controlled by another application
|
static int
|
CTIERR_APPLICATION_DATA_SIZE_ EXCEEDED
|
This error indicates that application data size has exceeded
limit
|
static int
|
CTIERR_AUTHENTICATION_TYPE_ ON_UNSUPPORTED_PORT
|
This error indicates that the port does not support the
authentication type that is used to create the provider.
|
static int
|
CTIERR_BIB_NOT_CONFIGURED
|
This error indicates built in bridge is not configured
|
static int
|
CTIERR_BIB_RESOURCE_NOT_ AVAILABLE
|
This error indicates that built in bridge resource not
available
|
static int
|
CTIERR_CALL_MANAGER_NOT_ AVAILABLE
|
This error indicates that Communications Manager is not
available currently
|
static int
|
CTIERR_CALL_NOT_EXISTED
|
This error indicates that call does not exist
|
static int
|
CTIERR_CALL_PARK_NO_DN
|
This error indicates no call park DN
|
static int
|
CTIERR_CALL_REQUEST_ALREADY_ OUTSTANDING
|
This error indicates call request already outstanding
|
static int
|
CTIERR_CALL_UNPARK_FAILED
|
This error indicates that call unpark did not succeed
|
static int
|
CTIERR_CAPABILITIES_DO_NOT_MATCH
|
This error indicates that capabilities do not match
|
static int
|
CTIERR_CLOSE_DELAY_NOT_ SUPPORTED_WITH_REG_TYPE
|
This error indicates that the close delay is not supported
with this registration type
|
static int
|
CTIERR_CONFERENCE_ALREADY_ EXISTED
|
This error indicates that conference already exists
|
static int
|
CTIERR_CONFERENCE_NOT_EXISTED
|
This error indicates that conference does not exist
|
static int
|
CTIERR_CONNECTION_ON_INVALID_PORT
|
This error indicates application is trying to connect to
invalid port
|
static int
|
CTIERR_CONSULT_CALL_FAILURE
|
This error indicates consult call failure
|
static int
|
CTIERR_CONSULTCALL_ALREADY_ OUTSTANDING
|
This error indicates that consult call already outstanding
|
static int
|
CTIERR_CRYPTO_CAPABILITY_MISMATCH
|
This error indicates that device registration failed as device
crypto algorithms does not match with current device registration
|
static int
|
CTIERR_CTIHANDLER_PROCESS_ CREATION_FAILED
|
This error indicates that CTIHandler process creation failed
|
static int
|
CTIERR_DB_INITIALIZATION_ERROR
|
This error indicates DB initialization error
|
static int
|
CTIERR_DEVICE_ALREADY_OPENED
|
This error indicates that device is already opened
|
static int
|
CTIERR_DEVICE_NOT_OPENED_YET
|
This error indicates that device is not yet opened
|
static int
|
CTIERR_DEVICE_OWNER_ALIVE_ TIMER_STARTED
|
This error indicates that there is a device registration
failure
|
static int
|
CTIERR_DEVICE_REGISTRATION_FAILED_ NOT_SUPPORTED_
MEDIATYPE
|
This error indicates an invalid media type, CTIPort need to be
registered with Dynamic media port registation if it has an intercom line
|
static int
|
CTIERR_DEVICE_RESTRICTED
|
This error indicates that the device is restricted
|
static int
|
CTIERR_DEVICE_SHUTTING_DOWN
|
This error indicates that device is shutting down
|
static int
|
CTIERR_DIRECTORY_LOGIN_TIMEOUT
|
This error indicates that there is a directory login time out
|
static int
|
CTIERR_DUPLICATE_CALL_REFERENCE
|
This error indicates duplicate call reference
|
static int
|
CTIERR_DYNREG_IPADDRMODE_ MISMATCH
|
This indicates registration failure when Cisco Media/Route
Terminal is already registered with different Addressing mode.
|
public static final int
|
CTIERR_ERROR_PLAYING_
|
This error indicates that there was an error playing the
announcement.
|
static int
|
CTIERR_EXISTING_STREAMING_ MEDIA_SESSION
|
This error occurs if an application attempts to invoke an
Agent Greeting API while another request is made and accepted.
JTAPI throws InvalidStateException with a description as
"There is an existing streaming media session".
|
public static final int
|
CTIERR_EXTEND_AND_CONNECT_ DESTINATION_NOT_REACHABLE
|
This error occurs if the extend and connect destination is not
reachable.
|
static int
|
CTIERR_FAC_CMC_REASON_CMC_ INVALID
|
Client Matter Code (CMC) entered is invalid
|
static int
|
CTIERR_FAC_CMC_REASON_CMC_ NEEDED
|
CMC is required to offer the call
|
static int
|
CTIERR_FAC_CMC_REASON_FAC_ CMC_NEEDED
|
Forced Authorization Code (FAC) and CMC are required to offer
call
|
static int
|
CTIERR_FAC_CMC_REASON_FAC_INVALID
|
FAC entered is invalid
|
static int
|
CTIERR_FAC_CMC_REASON_FAC_ NEEDED
|
FAC is required to offer the call
|
static int
|
CTIERR_FEATURE_ALREADY_REGISTERED
|
This error indicates feature already registered
|
static int
|
CTIERR_FEATURE_DATA_REJECT
|
This error indicates feature data reject
|
static int
|
CTIERR_FEATURE_SELECT_FAILED
|
This error indicates that feature select failed
|
static int
|
CTIERR_ILLEGAL_DEVICE_TYPE
|
This error indicates that the device type is illegal
|
static int
|
CTIERR_INCOMPATIBLE_AUTOINSTALL_ PROTOCOL_VERSION
|
This error indicates that auto install protocol version is
incompatible
|
static int
|
CTIERR_INCORRECT_MEDIA_CAPABILITY
|
Device registration failed due to incorrect media capability.
|
static int
|
CTIERR_INFORMATION_NOT_AVAILABLE
|
This error indicates that information is not available
|
static int
|
CTIERR_INTERCOM_SPEEDDIAL_ ALREADY_CONFIGURED
|
This error indicates that intercom target value is already
configured, application is trying to make call with Intercom target DN
|
static int
|
CTIERR_INTERCOM_SPEEDDIAL_ ALREADY_SET
|
This error indicates that intercom request failed as intercom
target value is already set, application is trying to set again
|
static int
|
CTIERR_INTERCOM_SPEEDDIAL_ DESTN_INVALID
|
This error indicates that intercomm request failed as intercom
target value in not in the intercom group
|
static int
|
CTIERR_INTERCOM_TALKBACK_ ALREADY_PENDING
|
This error indicates that intercom talk back request is
already pending
|
static int
|
CTIERR_INTERCOM_TALKBACK_FAILURE
|
This error indicates that talkback request failed for some
reason.
|
static int
|
CTIERR_INTERNAL_FAILURE
|
This error indicates there is a CTI internal failure
|
static int
|
CTIERR_INVALID_CALLID
|
This error indicates the call ID is invalid
|
static int
|
CTIERR_INVALID_DEVICE_NAME
|
This error indicates that the device name is not valid
|
static int
|
CTIERR_INVALID_DTMFDIGITS
|
Play DTMF request failed because it is an invalid DTMF digit.
|
static int
|
CTIERR_INVALID_FILTER_SIZE
|
This error indicates that filter size is invalid
|
static int
|
CTIERR_INVALID_MEDIA_DEVICE
|
This error indicates that the media device is not valid
|
static int
|
CTIERR_INVALID_MEDIA_PARAMETER
|
This error indicates media parameter is inavlid
|
static int
|
CTIERR_INVALID_MEDIA_PROCESS
|
This error indicates that there is an invalid media process
|
static int
|
CTIERR_INVALID_MEDIA_RESOURCE_ID
|
This error indicates media resource ID is not valid
|
static int
|
CTIERR_INVALID_MESSAGE_HEADER_INFO
|
This error indicates that the header info is not valid
|
static int
|
CTIERR_INVALID_MESSAGE_LENGTH
|
This error indicates that message length is invalid
|
static int
|
CTIERR_INVALID_MONITOR_DESTN
|
This error indicates monitoring request failed due to invalid
monitoring destination
|
static int
|
CTIERR_INVALID_MONITOR_DN_TYPE
|
This error indicates an invalid monitor DN type
|
static int
|
CTIERR_INVALID_MONITORMODE
|
This error indicates monitor request failed due to an invalid
monitor mode
|
static int
|
CTIERR_INVALID_PARAMETER
|
This error indicates that the parameter is not valid
|
static int
|
CTIERR_INVALID_PARK_DN
|
This error indicates that the DN is an invalid park DN
|
static int
|
CTIERR_INVALID_PARK_REGISTRATION_ HANDLE
|
This error indicates that the handle is an invalid park
registration handle
|
static int
|
CTIERR_INVALID_RESOURCE_TYPE
|
This error indicates an invalid resource type
|
static int
|
CTIERR_IPADDRMODE_MISMATCH
|
This indicates the registration failure due to IP Addressing
Mode mismatch.
|
static int
|
CTIERR_LINE_OUT_OF_SERVICE
|
This error indicates that line is out of service.
|
static int
|
CTIERR_LINE_RESTRICTED
|
This error indicates that the line is restricted
|
static int
|
CTIERR_MAXCALL_LIMIT_REACHED
|
This error indicates that maximum call limit has reached
|
static int
|
CTIERR_MEDIA_ALREADY_TERMINATED_ DYNAMIC
|
This error indicates that device registration failed as device
is registered with Dynamic media termination
|
Final static int
|
CTIERR_MEDIA_ALREADY_TERMINATED_ DYNAMIC_GETPORT_SUPPORT
|
This error indicates that the application tries to register a
terminal, which is already registered with get port support, with a different
registration type.
|
static int
|
CTIERR_MEDIA_ALREADY_TERMINATED_ NONE
|
This error indicates that device registration failed as device
is already registered with media termination none
|
static int
|
CTIERR_MEDIA_ALREADY_TERMINATED_ STATIC
|
This error indicates that device registration failed as device
is registered with Static media termination
|
Final static int
|
CTIERR_MEDIA_ALREADY_TERMINATED_ STATIC_GETPORT_SUPPORT
|
This error indicates that the application tries to register a
terminal, which is already registered with get port support, with a different
registration type.
|
static int
|
CTIERR_MEDIA_CAPABILITY_MISMATCH
|
This error indicates that device registration failed as media
capability of device does not match with current device registration
|
static int
|
CTIERR_MEDIA_CONNECTION_FAILED
|
This error indicates that there is a general failure with the
Agent Greeting feature. JTAPI throws InvalidStateException with a description
as
"The connection to the media has failed".
|
static int
|
CTIERR_MEDIA_RESOURCE_NAME_ SIZE_EXCEEDED
|
This error indicates that media resource name size has
exceeded limit
|
static int
|
CTIERR_MEDIAREGISTRATIONTYPE_ DO_NOT_MATCH
|
This error indicates that media registration types do not
match
|
static int
|
CTIERR_MESSAGE_TOO_BIG
|
This error indicates that message is too big
|
static int
|
CTIERR_MORE_ACTIVE_CALLS_THAN_ RESERVED
|
This error indicates that there are more active calls than
reserved
|
static int
|
CTIERR_NO_EXISTING_CALLS
|
This error indicates there are no existing calls
|
static int
|
CTIERR_NO_EXISTING_CONFERENCE
|
This error indicates that there is no existing conference
|
public static final int
|
CTIERR_NO_PERSISTENT_CALL_EXISTS
|
This error indicates that no persistent call exists.
|
static int
|
CTIERR_NO_RECORDING_SESSION
|
This error indicates recording request failed as there is no
recording session
|
static int
|
CTIERR_NO_RESPONSE_FROM_MP
|
This error indicates no response from media resource
|
static int
|
CTIERR_NO_STREAMING_MEDIA_SESSION
|
This error occurs if an application attempts to invoke a stop
request while there is no existing media stream to stop. JTAPI throws
InvalidStateException with a description as
"There is no streaming media session active".
|
static int
|
CTIERR_NOT_PRESERVED_CALL
|
This error indicates that the call is not preserved
|
static int
|
CTIERR_OPERATION_FAILED_QUIETCLEAR
|
This error indicates that feature unavailable for this call
due to temporary failure
|
static int
|
CTIERR_OPERATION_NOT_ALLOWED
|
This error indicates that this operation is not allowed
|
static int
|
CTIERR_OUT_OF_BANDWIDTH
|
This error indicates out of bandwidth error
|
static int
|
CTIERR_OWNER_NOT_ALIVE
|
This error indicates a failure during registering the device
|
static int
|
CTIERR_PENDING_ACCEPT_OR_ ANSWER_REQUEST
|
This error indicates that there is a pending accept or answer
request
|
static int
|
CTIERR_PENDING_START _MONITORING_REQUEST
|
This error indicates there is a pending start monitoring
request
|
static int
|
CTIERR_PENDING_START_RECORDING_ REQUEST
|
This error indicates there is a pending start recording
request
|
static int
|
CTIERR_PENDING_STOP_RECORDING_ REQUEST
|
This error indicates there is a pending stop recording request
|
public static final int
|
CTIERR_PLAY_ANNOUNCEMENT_FAILED
|
This error indicates that the play announcement failed.
|
static int
|
CTIERR_PRIMARY_CALL_INVALID
|
This error indicates that primary call in monitoring request
in invalid or gone idle
|
static int
|
CTIERR_PRIMARY_CALL_STATE_INVALID
|
This error indicates that primary call in monitoring request
is in invalid state
|
static int
|
CTIERR_RECORDING_ALREADY_ INPROGRESS
|
This error indicates recording request failed that recording
is already in progress
|
static int
|
CTIERR_RECORDING_CONFIG_NOT_ MATCHING
|
This error indicates recording configuration does not match
|
static int
|
CTIERR_RECORDING_SESSION_INACTIVE
|
This error indicates recording request failed because
recording session is inactive
|
static int
|
CTIERR_REDIRECT_UNAUTHORIZED_ COMMAND_USAGE
|
This error indicates a redirect unauthorized command usage
|
static int
|
CTIERR_REGISTER_FEATURE_ ACTIVATION_FAILED
|
This error indicates that register feature activation failed
|
static int
|
CTIERR_REGISTER_FEATURE_APP_ ALREADY_REGISTERED
|
Register feature application was already registered
|
static int
|
CTIERR_REGISTER_FEATURE_PROVIDER_ NOT_REGISTERED
|
Register feature provider was not registered.
|
static int
|
CTIERR_REQUEST_ALREADY_PENDING
|
This error occurs if an application attempts to invoke an
Agent Greeting API while another request is made. JTAPI throws
InvalidStateException with a description as
"The request was rejected because there is a similar request
already pending".
|
static int
|
CTIERR_RESOURCE_NOT_AVAILABLE
|
This error indicates that resource is not available to fulfil
the request
|
public static final int
|
CTIERR_SECURITY_CAPABILITY_MISMATCH
|
This error code is exposed when the monitoring/recording
request is rejected when the supervisor/recorder does not meet the security
capabilities of the agent.
|
int
|
CTIERR_SSO_AUTH_SERVER_DOWN
|
This error code is returned if authorization server is down.
|
int
|
CTIERR_SSO_DISABLED
|
This error code is returned if the Single Sign-On feature is
not enabled on
Cisco Unified Communications
Manager.
|
static int
|
CTIERR_START_MONITORING_FAILED
|
This error indicates that start monitoring request failed
|
static int
|
CTIERR_START_RECORDING_FAILED
|
This error indicates that start recording request failed
|
static int
|
CTIERR_START_STREAM_MEDIA_FAILED
|
This error occurs if there is a general failure with the Agent
Greeting feature, that is not covered by any of the other error codes.JTAPI
throws InvalidStateException with a description as
"Start streaming media request failed".
|
static int
|
CTIERR_STOP_STREAM_MEDIA_FAILED
|
This error occurs if there is a general failure with the Agent
Greeting feature, that is not covered by any of the other error codes.
JTAPI throws InvalidStateException with a description as
"Stop streaming media request failed".
|
static int
|
CTIERR_STATION_SHUT_DOWN
|
This error indicates that there is a station shutdown
|
static int
|
CTIERR_SYSTEM_ERROR
|
This error indicates CTI system error
|
static int
|
CTIERR_UDP_PASS_THROUGH_NOT_ SUPPORTED
|
This error indicates UDP data passthrough not supported
|
static int
|
CTIERR_UNKNOWN_EXCEPTION
|
This error indicates an unknown exception occured
|
static int
|
CTIERR_UNSUPPORTED_CALL_PARK_ TYPE
|
This error indicates that call park type is not supported
|
static int
|
CTIERR_UNSUPPORTED_CFWD_TYPE
|
This error indicates that the call forward type is unsupported
|
static int
|
CTIERR_USER_NOT_AUTH_FOR_SECURITY
|
This error indicates user is not authorized for secure
connection
|
static int
|
CTIERR_REDIRECT_CALL_PARTITIONING_ POLICY
|
This error indicates redirect is not authorized
|
static int
|
CTIERR_FEATURE_NOT_AVAILABLE
|
This error indicates that the feature is unavailable
|
static int
|
DARES_INVALID_REQ_TYPE
|
This error indicates that there is an internal call processing
error: DaRes invalid request type
|
static int
|
DATA_SIZE_LIMIT_EXCEEDED
|
This error indicates that XML data object size is bigger than
allowed.
|
static int
|
DB_ERROR
|
This error indicates that the device query contained an
illegal device type
|
static int
|
DB_ILLEGAL_DEVICE_TYPE
|
This error indicates illegal device type in DB
|
static int
|
DB_NO_MORE_DEVICES
|
This error is no longer used.
|
static int
|
DESTINATION_BUSY
|
This error indicates that destination is busy
|
static int
|
DESTINATION_UNKNOWN
|
This error indicates that destination is not found
|
static int
|
DEVICE_ALREADY_REGISTERED
|
This error indicates that device registration attempt failed,
because the device is already registered
|
static int
|
DEVICE_NOT_OPEN
|
This error indicates that an attempt to open a line failed, as
the device is not opened or the device is not registered.
|
static int
|
DEVICE_OUT_OF_SERVICE
|
This error indicates that device is out of service.
|
static int
|
DIGIT_GENERATION_ALREADY_IN_ PROGRESS
|
This error indicates that digit generation is already in
progress.
|
static int
|
DIGIT_GENERATION_CALLSTATE_ CHANGED
|
This error indicates that call state is invalid to continue.
|
static int
|
DIGIT_GENERATION_WRONG_CALL_ HANDLE
|
This error indicates that call handle is invalid and call may
be gone.
|
static int
|
DIGIT_GENERATION_WRONG_CALL_ STATE
|
This error indicates that call state is not valid to generate
digits.
|
static int
|
DIRECTORY_LOGIN_FAILED
|
This error indicates that directory login failed: directory
not initialized
|
static int
|
DIRECTORY_LOGIN_NOT_ALLOWED
|
This error indicates that directory login failed
|
static int
|
DIRECTORY_TEMPORARY_UNAVAILABLE
|
This error indicates that directory is temporarily
unavailable.
|
static int
|
EXISTING_FIRSTPARTY
|
This error indicates that there is already a device
controlling media.
|
static int
|
HOLDFAILED
|
This error indicates that the hold was rejected by line
control or call control layers
|
static int
|
ILLEGAL_CALLINGPARTY
|
This error indicates that an attempt was made to originate
call using a calling party that is not on the device
|
static int
|
ILLEGAL_CALLSTATE
|
This error indicates line is not in a legal state to invoke
the request
|
static int
|
ILLEGAL_HANDLE
|
This error indicates the handle is not valid
|
static int
|
ILLEGAL_MESSAGE_FORMAT
|
This error indicates that there is a QBE protocol error
|
static int
|
INCOMPATIBLE_PROTOCOL_VERSION
|
This error indicates that JTAPI and CTI versions are not
compatible : CTI Error Protocol version not supported
|
static int
|
INVALID_LINE_HANDLE
|
This error indicates that attempt to perform a line operation
on an invalid line handle.
|
static int
|
INVALID_RING_OPTION
|
This error indicates that the ring option is invalid
|
static int
|
LINE_GREATER_THAN_MAX_LINE
|
This error indicates that line is greater than the maximum
available lines on this device
|
static int
|
LINE_INFO_DOES_NOT_EXIST
|
This error indicates that line information does not exist in
the database.
|
static int
|
LINE_NOT_PRIMARY
|
This error indicates that internal error returned from call
control.
|
static int
|
LINECONTROL_FAILURE
|
This error indicates line control refuses to allow a new call
to be initiated because of its current state.
|
static int
|
MAX_NUMBER_OF_CTI_CONNECTIONS_ REACHED
|
The maximum number of CTI connections was reached.
|
static int
|
MSGWAITING_DESTN_INVALID
|
This error indicates that attempt to set message waiting lamp
for an invalid DN; Message Waiting Destination not found.
|
static int
|
NO_ACTIVE_DEVICE_FOR_THIRDPARTY
|
This error indicates there is no active device for thirdparty
|
static int
|
NO_CONFERENCE_BRIDGE
|
This error indicates that no conference bridge available
|
static int
|
NOT_INITIALIZED
|
This error indicates that attempt is made to open a provider
before CTI initialization completes
|
static int
|
OPERATION_NOT_AVAILABLE_IN_ CURRENT_STATE
|
This error indicates that the operation is not available in
Current state.
|
static int
|
PROTOCOL_TIMEOUT
|
Internal error returned from call control
|
static int
|
PROVIDER_ALREADY_OPEN
|
This error indicates that an attempt is made to reopen
provider
|
static int
|
PROVIDER_CLOSED
|
Attempt to close provider while it is already closed
|
static int
|
PROVIDER_NOT_OPEN
|
This error indicates that device list incomplete or device
list query timeout or query aborted
|
static int
|
REDIRECT_CALL_CALL_TABLE_FULL
|
This error indicates that internal error is returned from call
control
|
static int
|
REDIRECT_CALL_DESTINATION_BUSY
|
This error indicates that the redirect destination is busy
|
static int
|
REDIRECT_CALL_DESTINATION_OUT_ OF_ORDER
|
This error indicates that redirect destination is out of order
|
static int
|
REDIRECT_CALL_DIGIT_ANALYSIS_ TIMEOUT
|
This error indicates a digit analyss time out, this is an
internal error returned from call control
|
static int
|
REDIRECT_CALL_DOES_NOT_EXIST
|
This error indicates that an attempt is made to redirect a
call that does not exist or is not longer active
|
static int
|
REDIRECT_CALL_INCOMPATIBLE_STATE
|
This error indicates that internal error is returned from call
control
|
static int
|
REDIRECT_CALL_MEDIA_CONNECTION_ FAILED
|
This error indicates media connection failure, this is an
internal error returned from call control
|
static int
|
REDIRECT_CALL_NORMAL_CLEARING
|
This error indicates that redirect failed because of normal
call clearing
|
static int
|
REDIRECT_CALL_ORIGINATOR_ ABANDONED
|
This error indicates that far end hung up on the call being
redirected
|
static int
|
REDIRECT_CALL_PARTY_TABLE_ FULL
|
This error indicates that internal error is returned from call
control
|
static int
|
REDIRECT_CALL_PENDING_REDIRECT_ TRANSACTION
|
This error indicates that internal error is returned from call
control
|
static int
|
REDIRECT_CALL_PROTOCOL_ERROR
|
This error indicates a protocol error, this is an internal
error returned from call control
|
static int
|
REDIRECT_CALL_UNKNOWN_DESTINATION
|
This error indicates that an attempt is made to redirect to an
unknown destination
|
static int
|
REDIRECT_CALL_UNKNOWN_ERROR
|
This error indicates that internal error is returned from call
control
|
static int
|
REDIRECT_CALL_UNKNOWN_PARTY
|
This error indicates an unknown party is detected, this is an
internal error returned from call control
|
static int
|
REDIRECT_CALL_UNRECOGNIZED_ MANAGER
|
This error indicates that internal error is returned from call
control
|
static int
|
REDIRECT_CALLINFO_ERR
|
This error indicates that internal error is returned from call
control
|
static int
|
REDIRECT_ERR
|
This error indicates that internal error is returned from call
control
|
static int
|
RETRIEVEFAILED
|
This error indicates that retrieval of call was rejected by
line control or call control
|
static int
|
RETRIEVEFAILED_ACTIVE_CALL_ON_LINE
|
This error indicates that error occurred in retrieving held
call; because there is already another active call on the line
|
static int
|
SSAPI_NOT_REGISTERED
|
This error indicates that the redirect command was issued when
the internal supporting interface was not initialized; either CTI has not yet
finished its initialization or an internal error occurred
|
static int
|
TIMEOUT
|
This error indicates that the request has timed out.
|
static int
|
TRANSFER_INACTIVE
|
This error indicates that attempt to complete transfer, while
consult tranfer is not there
|
static int
|
TRANSFERFAILED
|
This error indicates that the transfer failed probably because
one of the call legs was hung up or disconnected from the far end
|
static int
|
TRANSFERFAILED_CALLCONTROL_ TIMEOUT
|
This error indicates that expected response from call control
not received during a transfer
|
static int
|
TRANSFERFAILED_DESTINATION_BUSY
|
This error indicates that an attempt is made to transfer call
to a busy destination
|
static int
|
TRANSFERFAILED_DESTINATION_ UNALLOCATED
|
This error indicates an attempt is made to to transfer call to
a directory number that is not registered
|
static int
|
TRANSFERFAILED_OUTSTANDING_ TRANSFER
|
This error indicates that existing transfer is still in
progress
|
static int
|
UNDEFINED_LINE
|
This error indicates that the line that was specified, is not
found on the device
|
static int
|
UNKNOWN_GLOBAL_CALL_HANDLE
|
This error indicates that the global call handle is unknown
|
static int
|
UNRECOGNIZABLE_PDU
|
This error indicates that there is a QBE protocol error
|
static int
|
UNSPECIFIED
|
This error indicates that an unspecified error has occured.
|