The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Changes to some of the configuration parameters may result in changes to the licence MAC, and you may have to rehost the Unified CCX license. For information about the configuration parameters, see Unified CCX Licenses.
Parameter |
Your Entry |
||
---|---|---|---|
Administrator ID You cannot change the original administrator account user ID; you can create additional administrator accounts.
|
|||
Administrator Password This field specifies the password for the administrator account, which you use for secure shell access to the CLI, for logging in to Cisco Unified Communications Operating System Administration, and for logging in to the Disaster Recovery System. Ensure that the password is at least six characters long; it can contain alphanumeric characters, hyphens, and underscores. You can change the password after installation. |
|||
Application User Name |
|||
Application User Password Use the Application User password as the default password for applications that are installed on the system, including Unified CCX and Unified Communications Manager. Ensure that the password is at least six characters long; it can contain alphanumeric characters, hyphens, and underscores. You can change the password after installation. |
|||
DNS Primary |
|||
DNS Secondary (optional) |
|||
Domain |
|||
Gateway Address |
|||
Hostname |
|||
IP Address |
|||
IP Mask |
|||
MTU Size
|
|||
NIC Duplex
|
|||
NIC Speed
|
|||
Enter the hostname or IP address of one or more Network Time Protocol (NTP) servers with which you want to synchronize. You can enter up to five NTP servers. You can change the NTP server after installation. |
|||
Servers in the cluster use the Security password to communicate with one another. The password must contain at least six alphanumeric characters. It can contain hyphens and underscores, but it must start with an alphanumeric character. Save this password. You will be asked to enter the same Security password when you install the second node to form a cluster. You can change the password after installation by using the following CLI command: CLI > set password user securityTo avoid losing communications between nodes, you must change the Security password on both nodes in a cluster and reboot both the nodes. For more information, see the description of this command in the Cisco Unified Operating System Administration Guide at http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_installation_and_configuration_guides_list.html. |
|||
SMTP Location
|
|||
Organization
|
|||
Unit
|
|||
Location |
|||
State
|
|||
Country
|
|||
Time Zone |