Configure Cisco VVB on Unified CVP
Procedure
Step 1 |
Log in to CVP Operations Console and click . |
||||||||||||||||||||||||||||||||||||||||||||||||
Step 2 |
Click Add New.
|
||||||||||||||||||||||||||||||||||||||||||||||||
Step 3 |
In the General tab, enter the field values, and click Save. To configure General settings on a VVB, on the General tab, enter the field values, as listed in the following table:
|
||||||||||||||||||||||||||||||||||||||||||||||||
Step 4 |
(Optional) On the Device Pool tab, select the field values and move to Selected. |
||||||||||||||||||||||||||||||||||||||||||||||||
Step 5 |
Click Save. |
Add or Remove Device From Device Pool
Procedure
Step 1 |
From the Device Management menu, select a device to add to the Device Pool. Example:A window that lists known devices of the type you selected appears. For example, if you select Call Server, all the known Unified CVP Call Servers are listed. |
||
Step 2 |
Select a device pool from the Device Pool list and click Edit. |
||
Step 3 |
On the Device Pool tab:
|
||
Step 4 |
Click Save & Deploy.
|