Service Discovery Requirements Workflow
Procedure
Command or Action | Purpose | |
---|---|---|
Step 1 | ||
Step 2 | ||
Step 3 | ||
Step 4 |
Service Discovery Requirements
-
DNS requirements
-
Certificate requirements
-
Test external SRV _collab-edge.
DNS Requirements
The DNS requirements for service discovery through remote access are:
-
Configure a _collab-edge DNS SRV record on an external DNS server.
-
Configure a _cisco-uds DNS SRV record on the internal name server.
-
Optionally, for a hybrid cloud-based deployment with different domains for the IM and Presence server and the voice server, configure the Voice Services Domain to locate the DNS server with the _collab-edge record.
![]() Note |
Jabber attempts connections to a maximum of three SSO-enabled servers, which are chosen randomly from all SSO-enabled servers that the DNS SRV records (_collab-edge and _cisco-uds) identify. If Jabber fails to connect three times, it considers Edge SSO unsupported. |
Certificate Requirements
Before you configure remote access, download the Cisco VCS Expressway and Cisco Expressway-E Server certificate. The Server certificate is used for both HTTP and XMPP.
For more information on configuring Cisco VCS Expressway certificate, see Configuring Certificates on Cisco VCS Expressway.
Test _collab-edge SRV Record
Test SRV Records
After creating your SRV records test to see if they are accessible.
Procedure
Step 1 |
Open a command prompt. |
Step 2 |
Enter nslookup. |
Step 3 |
Enter set type=SRV. |
Step 4 |
Enter the name for each of your SRV records. For example
|