Configuring Network Time and Time Zone Settings
Use these procedures to ensure that voice messages and system processes are identified with the correct day and time.
Configure the following features from this window:
Before You Begin
These parameters are required to ensure that voice messages and system processes are identified with the correct day and time:
Note Reload the Cisco Unity Express software after any NTP changes to ensure that the server information is updated.
Adding an NTP Server
Use this procedure to add an NTP server.
Step 1 Choose
System
>
Network Time and Time Zone Settings
. The Network Time and Time Zone Settings window appears.
Step 2 Click
Add
. The Add a NTP Server window appears.
Step 3 Enter the hostname or IP address for the NTP server. To make it the primary NTP server, check the box next to “Preferred”.
Step 4 Click
Add
. The Network Time and Time Zone Settings screen appears with the new server listed in the table.
Deleting an NTP Server
Use this procedure to delete an NTP server.
Step 1 Choose
System
>
Network Time and Time Zone Settings
. The Network Time and Time Zone Settings window appears.
Step 2 To delete an NTP server, click the box next to the server to be removed and click
Delete
.
Step 3 Click
Ok
at the prompt. The window appears without the server listed.
Changing the Time Zone
Use this procedure to change the time zone.
Step 1 Choose
System
>
Network Time and Time Zone Settings
. The Network Time and Time Zone Settings window appears.
Step 2 Use the drop-down menu to select the correct country.
Step 3 Use the drop-down menu to select the correct time zone.
Step 4 To activate the changes, click
Apply
.
Step 5 Click
Ok
at the information prompt.