Summary Data

Revision History

The MME manager generates traps based on the below two conditions:

• When the MME manager CPU utilization is above the configured congestion threshold value, the MME manager state becomes busy and it sends a "MMEManagerBusy" trap informing its instance and status.

• When the MME manager CPU utilization reduces below the configured congestion threshold value, the MME Manager state becomes Normal and it sends a "MMEManagerNormal" trap informing its instance and status.

Important

If MME manager restarts, it will not come back in the same state, so it will not send any trap.

Use the following configuration to enable MME Manager Status Traps.

Enable MME manager busy trap

config  
   snmp trap enable MMEManagerBusy  
   end  

Enable MME manager normal trap

config  
   snmp trap enable MMEManagerNormal  
   end  

Disable MME manager busy trap

config  
   snmp trap suppress MMEManagerBusy  
   end  

Disable MME manager normal trap

config  
   snmp trap suppress MMEManagerNormal  
   end  

NOTES:

• enable : Enables specific traps.

• suppress : Suppresses (disables) specific traps.

• MMEManagerBusy : Trap Number 1405.

• MMEManagerNormal : Trap Number 1406.

This section provides information regarding SNMP Traps available to monitor and troubleshoot the MME Manager Status Traps feature.