PCC-TimeDef Configuration Mode Commands


Important
This configuration mode is supported from StarOS Release 12.1 onward.

Mode

The PCC-TimeDef Configuration Mode is used to configure various time definitions (TimeDefs) in the PCC-service instance. A PCC-TimeDef specifies the start and end time for triggering policy-related procedures or conditions.

Exec > Global Configuration > Context Configuration > PCC Service Configuration > PCC TimeDef Configuration

configure > context context_name > pcc-service service_name > timedef timedef_name

Entering the above command sequence results in the following prompt: 

[context_name]host_name(config-pcc-timedef)#

Important

The commands or keywords/variables that are available are dependent on platform type, product version, and installed license(s).

end

Exits the current configuration mode and returns to the Exec mode.

Product

All

Privilege

Security Administrator, Administrator

Syntax

end

Usage Guidelines

Use this command to return to the Exec mode.

exit

Exits the current mode and returns to the parent configuration mode.

Product

All

Privilege

Security Administrator, Administrator

Syntax

exit

Usage Guidelines

Use this command to return to the parent configuration mode.

start date

This command defines PCC-TimeDefs with a start and end dates with time for an event to trigger a procedure or condition in an IP-CAN session.

Product

IPCF

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > Context Configuration > PCC Service Configuration > PCC TimeDef Configuration

configure > context context_name > pcc-service service_name > timedef timedef_name

Entering the above command sequence results in the following prompt: 

[context_name]host_name(config-pcc-timedef)#

Syntax

[no ] start  date  start_date time  start_time end  date  end_date time  end_time

no

Removes the specified time definition.

date start_date

Specifies the start date start_date in MM /DD /YY format.

Following format is used for MM /DD /YY in start_date :
  • MM specifies the month of the start date from January through December and must be an integer between 1 through 12.
  • DD specifies the date of month of the start date 1 through 31 and must be an integer between 1 through 31.
  • YY specifies the year of the start date from 2010 through 2037 and must be an integer between 10 through 37.

time start_time

Specifies the start time start_time in HH MIN SS format.

Following format is used for HH MIN SS in start_time :
  • HH specifies the hour of the start date in 24 hour format and must be an integer between 00 through 23.
  • MIN specifies the minutes of the hour of the start date must be an integer between 00 through 59.
  • SS specifies the seconds of the minute of the start date must be an integer between 00 through 59.

end date end_date

Specifies the end date end_date in MM /DD /YY format.

Following format is used for MM /DD /YY in end_date :
  • MM specifies the month of the end date from January through December and must be an integer between 1 through 12.
  • DD specifies the date of month of the end date 1 through 31 and must be an integer between 1 through 31.
  • YY specifies the year of the end date from 2010 through 2037 and must be an integer between 10 through 37.

time end_time

Specifies the end time end_time in HH MIN SS format.

Following format is used for HH MIN SS in end_time :
  • HH specifies the hour of the end date in 24 hour format and must be an integer between 00 through 23.
  • MIN specifies the minutes of the hour of the end date must be an integer between 00 through 59.
  • SS specifies the seconds of the minute of the end date must be an integer between 00 through 59.

Usage Guidelines

Use this command to define a PCC-TimeDef with a start and end dates with time for an event to trigger a procedure or condition in an IP-CAN session.

Example

The following command defines a PCC-TimeDef with start date as December 31st 2010 at 00 Hrs. 30 mins. and 00 seconds and end date as January 31st 2011 at 23 Hrs. 59 mins. and 59 seconds: 
start  date  12/31/10 time  00 30 00 end  date  01/31/11 time  23 59 59

start day

This command defines PCC-TimeDefs with a start and end week days with time for an event to trigger a procedure or condition in an IP-CAN session.

Product

IPCF

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > Context Configuration > PCC Service Configuration > PCC TimeDef Configuration

configure > context context_name > pcc-service service_name > timedef timedef_name

Entering the above command sequence results in the following prompt: 

[context_name]host_name(config-pcc-timedef)#

Syntax

[no ] start  day  start_weekdays time  start_time end  day  end_weekdays time  end_time

no

Removes the specified time definition.

day start_weekdays

Specifies the start day as week days.

Following days are used as start_weekdays :
  • friday specifies Friday of the week as start day.
  • monday specifies Monday of the week as start day.
  • saturday specifies Saturday of the week as start day.
  • sunday specifies Sunday of the week as start day.
  • thrusday specifies Thursday of the week as start day.
  • tuesday specifies Tuesday of the week as start day.
  • wednesday specifies Wednesday of the week as start day.

time start_time

Specifies the start time start_time in HH MIN SS format.

Following format is used for HH MIN SS in start_time :
  • HH specifies the hour of the start day in 24 hour format and must be an integer between 00 through 23.
  • MIN specifies the minutes of the hour of the start day must be an integer between 00 through 59.
  • SS specifies the seconds of the minute of the start day must be an integer between 00 through 59.

end day end_weekdays

Specifies the end day as week days.

Following days are used as end_weekdays :
  • friday specifies Friday of the week as end day.
  • monday specifies Monday of the week as end day.
  • saturday specifies Saturday of the week as end day.
  • sunday specifies Sunday of the week as end day.
  • thrusday specifies Thursday of the week as end day.
  • tuesday specifies Tuesday of the week as end day.
  • wednesday specifies Wednesday of the week as end day.

time end_time

Specifies the end time end_time in HH MIN SS format.

Following format is used for HH MIN SS in end_time :
  • HH specifies the hour of the end day in 24 hour format and must be an integer between 00 through 23.
  • MIN specifies the minutes of the hour of the end day must be an integer between 00 through 59.
  • SS specifies the seconds of the minute of the end day must be an integer between 00 through 59.

Usage Guidelines

Use this command to define a PCC-TimeDef with a start and end weekdays with time for an event to trigger a procedure or condition in an IP-CAN session.

Example

The following command defines a PCC-TimeDef with start day as Friday at 00 Hrs. 30 mins. and 00 seconds and end day as Sunday at 23 Hrs. 59 mins. and 59 seconds: 
start  day  friday  time  00 30 00 end  day  sunday  time  23 59 59

start time

This command defines PCC-TimeDefs with a start and end time of a day for an event to trigger a procedure or condition in an IP-CAN session.

Product

IPCF

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > Context Configuration > PCC Service Configuration > PCC TimeDef Configuration

configure > context context_name > pcc-service service_name > timedef timedef_name

Entering the above command sequence results in the following prompt: 

[context_name]host_name(config-pcc-timedef)#

Syntax

[no ] start  time  start_time end  time  end_time

no

Removes the specified time definition.

time start_time

Specifies the start time start_time in HH MIN SS format.

Following format is used for HH MIN SS in start_time :
  • HH specifies the hour of the day in 24 hour format and must be an integer between 00 through 23.
  • MIN specifies the minutes of the hour of the day must be an integer between 00 through 59.
  • SS specifies the seconds of the minute of the day must be an integer between 00 through 59.

end time end_time

Specifies the end time end_time in HH MIN SS format.

Following format is used for HH MIN SS in end_time :
  • HH specifies the end hour of the day in 24 hour format and must be an integer between 00 through 23.
  • MIN specifies the minutes of the end hour of the day must be an integer between 00 through 59.
  • SS specifies the seconds of the minute of the end hour must be an integer between 00 through 59.

Usage Guidelines

Use this command to define a PCC-TimeDef with a start and end time for an event to trigger a procedure or condition in an IP-CAN session.

Example

The following command defines a PCC-TimeDef with start at 00 Hrs. 30 mins. and 00 seconds and end at 23 Hrs. 59 mins. and 59 seconds: 
start  time  00 30 00 end  time  23 59 59

time-slot

This command defines PCC-TimeDefs with a start and end week days with time for an event to trigger a procedure or condition in an IP-CAN session.

Product

IPCF

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > Context Configuration > PCC Service Configuration > PCC TimeDef Configuration

configure > context context_name > pcc-service service_name > timedef timedef_name

Entering the above command sequence results in the following prompt: 

[context_name]host_name(config-pcc-timedef)#

Syntax

[ no ] time-slot  slot_num{ start date start_date time  start_time end date  end_date time  end_time | start day  start_weekdays time  start_timeend day  end_weekdays time  end_time | start time  start_time end time  end_time 
[ no ] time-slot  slot_num

no

Removes the specified time slot definition.

slot_num

Specifies the time slot number to be configured with this command and it must be an integer between 1 through 64.

date start_date

Specifies the start date start_date in MM /DD /YY format.

Following format is used for MM /DD /YY in start_date :
  • MM specifies the month of the start date from January through December and must be an integer between 1 through 12.
  • DD specifies the date of month of the start date 1 through 31 and must be an integer between 1 through 31.
  • YY specifies the year of the start date from 2010 through 2037 and must be an integer between 10 through 37.

time start_time

Specifies the start time start_time in HH MIN SS format.

Following format is used for HH MIN SS in start_time :
  • HH specifies the hour of the start date in 24 hour format and must be an integer between 00 through 23.
  • MIN specifies the minutes of the hour of the start date must be an integer between 00 through 59.
  • SS specifies the seconds of the minute of the start date must be an integer between 00 through 59.

end date end_date

Specifies the end date end_date in MM /DD /YY format.

Following format is used for MM /DD /YY in end_date :
  • MM specifies the month of the end date from January through December and must be an integer between 1 through 12.
  • DD specifies the date of month of the end date 1 through 31 and must be an integer between 1 through 31.
  • YY specifies the year of the end date from 2010 through 2037 and must be an integer between 10 through 37.

time end_time

Specifies the end time end_time in HH MIN SS format.

Following format is used for HH MIN SS in end_time :
  • HH specifies the hour of the end date in 24 hour format and must be an integer between 00 through 23.
  • MIN specifies the minutes of the hour of the end date must be an integer between 00 through 59.
  • SS specifies the seconds of the minute of the end date must be an integer between 00 through 59.

day start_weekdays

Specifies the start day as week days.

Following days are used as start_weekdays :
  • friday specifies Friday of the week as start day.
  • monday specifies Monday of the week as start day.
  • saturday specifies Saturday of the week as start day.
  • sunday specifies Sunday of the week as start day.
  • thrusday specifies Thursday of the week as start day.
  • tuesday specifies Tuesday of the week as start day.
  • wednesday specifies Wednesday of the week as start day.

time start_time

Specifies the start time start_time in HH MIN SS format.

Following format is used for HH MIN SS in start_time :
  • HH specifies the hour of the start day in 24 hour format and must be an integer between 00 through 23.
  • MIN specifies the minutes of the hour of the start day must be an integer between 00 through 59.
  • SS specifies the seconds of the minute of the start day must be an integer between 00 through 59.

end day end_weekdays

Specifies the end day as week days.

Following days are used as end_weekdays :
  • friday specifies Friday of the week as end day.
  • monday specifies Monday of the week as end day.
  • saturday specifies Saturday of the week as end day.
  • sunday specifies Sunday of the week as end day.
  • thrusday specifies Thursday of the week as end day.
  • tuesday specifies Tuesday of the week as end day.
  • wednesday specifies Wednesday of the week as end day.

time end_time

Specifies the end time end_time in HH MIN SS format.

Following format is used for HH MIN SS in end_time :
  • HH specifies the hour of the end day in 24 hour format and must be an integer between 00 through 23.
  • MIN specifies the minutes of the hour of the end day must be an integer between 00 through 59.
  • SS specifies the seconds of the minute of the end day must be an integer between 00 through 59.

time start_time

Specifies the start time start_time in HH MIN SS format.

Following format is used for HH MIN SS in start_time :
  • HH specifies the hour of the day in 24 hour format and must be an integer between 00 through 23.
  • MIN specifies the minutes of the hour of the day must be an integer between 00 through 59.
  • SS specifies the seconds of the minute of the day must be an integer between 00 through 59.

end time end_time

Specifies the end time end_time in HH MIN SS format.

Following format is used for HH MIN SS in end_time :
  • HH specifies the end hour of the day in 24 hour format and must be an integer between 00 through 23.
  • MIN specifies the minutes of the end hour of the day must be an integer between 00 through 59.
  • SS specifies the seconds of the minute of the end hour must be an integer between 00 through 59.

Usage Guidelines

Use this command to define a time slot with a start day, start time, and start date optiion for an event to trigger a procedure or condition in an IP-CAN session. A maximum of 12 time-slots can be configured through this command.

Example

The following command defines a time slot 2 which will start on Friday at 00:30:00 and ends on Saturday at 23:00:00: 
start day friday start time 00 30 00 end day saturday time 23 00 00