Config Payload Extension for DHCP Address Configuration
Assumptions and Limitations
- In current release only 3 dhcp addresses per INTERNAL_IP4_DHCP or INTERNAL_IP6_DHCP requests will be supported.
-
The DHCP addresses will be configured as part of wsg-service. 3 ipv4 and 3 ipv6 dhcp server addresses will be allowed per service.
Server dhcp
Specifies the dhcp server addresses to be sent to the peer in authentication response.
Product
SecGW (WSG)
Privilege
Security Administrator
Mode
Exec > Global Configuration > Context Configuration > WSG-Service Configuration
configure > context context_name > wsg-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-wsg-service)#
Syntax
server dhcp { ipv4 ipv4_address [ IP-ADDRESS | IP-ADDRESS ] | ipv6 ipv6_address [ IPv6-ADDRESS | IPv6-ADDRESS ] }
no server dhcp { ipv4 [ ipv6 ] | ipv6 [ ipv4 ] }
no
Deletes the specified parameter.
ipv4_address
Specifies the ipv4 address of the dhcp-server to be sent to the peer. The IPV4 address should be in the format ##.##.##.## which is the first ipv4 dhcp-server's address.
IP-ADDRESS
Specifies ipv4 address of the dhcp-server to be sent to the peer.
ipv6_address
Specifies the ipv6 address of the dhcp-server to be sent to the peer. The IPV6 address should be in the format ####:####:####:####:####:####:####:#### (IPv6 also supports :: notation).
IPv6-ADDRESS
Specifies ipv6 address of the dhcp-server to be sent to the peer.
Usage Guidelines
This command specifies the dhcp server addresses to be sent to the peer in authentication response
Example
server dhcp ipv4 123.234.345.567
Config Payload extension for DHCP Address Support Show Command Outputs
As part of " Config Payload extension for DHCP Address " feature below show commands output are introduced:
-
DHCP: ipv4 : <##.##.##.## > or NA(if not configured)
<##.##.##.## >
<##.##.##.## >
-
ipv6 : < #:#:#:#:#:#:#:#> or NA(if not configured)
<##.##.##.## >
<##.##.##.## >
-
server dhcp ipv4 <v4 address> <v4 address> <v4 address> <cr>
-
server dhcp ipv6 <v6 address> <v6 address> <v6 address> <cr>